Red 2

Discussion in 'AnyDVD HD (DVD issues)' started by PuNiSh3R, Nov 16, 2013.

  1. ichido

    ichido New Member

    Joining in the the conversation. Using 7.3.7.0 and took out first 2 titles and got very bad compression rate 17%. at 51% will see how it looks later. Thinking I should do the same later and use a DVD9 and get better compression and should not be over the 4.37 gig needed
     
  2. ichido

    ichido New Member

    used 7.3.7.0 and took first two titles out and successful read to hdd and will burn now. My copy is not blue ray but the reader I used will read blue ray. If this helps, try it out. I did get this from someone else here on the forum. Thanks whoever it was. I tried other ways taking the title out but did not get the right ones. LOL
     
  3. James

    James Redfox Development Team Staff Member

    please use anydvd 7.3.7.4
     
  4. jag624

    jag624 Member

    RED2 problem ripping

    Hi guys..

    I tried ripping directly RED2 to the hard drive, it started fine but at 35% into it, I got this error message

    File IO 3 vts_19_1.VOB 20154368 389120

    It appears it cannot read this particular section of the movie, I don't know why, the disc is brand new, not a single
    speck of dirt on it, I tried it in another computer with the same result. I am using AnyDvd version 7.3.7.0 which is
    the latest version I downloaded when I was notified by email there was a new version available.
    I don't have any problems ripping other new movies to the hard drive, only this one. Any help is appreciated. Thanks..
     
  5. mmdavis

    mmdavis Well-Known Member

    The post right above yours says to use beta version 7.3.7.4 to do this movie correctly. If you use that and you still receive a File IO3 error, it is most likely a bad disc, but you would need to post an AnyDVD log to verify. Beta versions are always the first Sticky located in their respective sections in the forum.
     
    Last edited: Dec 8, 2013
  6. jag624

    jag624 Member

    RED2 problem ripping

    Thanks for the reply. Yes, I saw that, but that's not an officially released version. If I decide to use it, where do I get it, under what heading is it located here ?.
     
  7. Ch3vr0n

    Ch3vr0n Translator NL & Mod

    under the sticky that specifically sais "Anydvd (HD) 7.3.7.4 beta" :p it's not really a choice "if u decide to get that". If u want anydvd to work on Red 2, then you NEED to get it. No way arround it, or u can wait for a new release but there's no way of knowing when they will release the next one.
     
  8. Kent73

    Kent73 Member

    Has anyone else who rips to MP4 gotten this to work without using CloneDVD yet? Still stopping at 1% for me.
     
  9. Ch3vr0n

    Ch3vr0n Translator NL & Mod

    Have you read this thread? Which version of anydvd are you using? Where is your logfile?

    Sent from my Nexus 7 using Tapatalk 4
     
  10. mmdavis

    mmdavis Well-Known Member

    And...AnyDVD doesn't convert to mp4, neither does CloneDVD, so what program are you using and how are you doing it? Trying to convert straight from disc or ripping to hard drive first?
     
  11. Kent73

    Kent73 Member

    Sorry...

    I was commenting earlier in the thread.

    AnyDVD using the latest beta and using Handbrake to convert from the DVD straight to MP4 for use on a Roku / Apple TV.
     
  12. mmdavis

    mmdavis Well-Known Member

    As has been said before, try ripping to harddisk with AnyDVD 7.3.7.4 beta and have Handbrake open that folder.
     
    Last edited: Dec 9, 2013
  13. jag624

    jag624 Member

    I already tried v 7.3.7.4 and was able to rip the movie fine, thanks to everyone who helped.
     
  14. funreviews

    funreviews Member

    Successful RIP of RED2

    Weird. I used 7.3.7.4, did AnyDVD rip to .ISO, also rip to disk, CloneDVD (CloneDVD option) and no matter what I do it will not burn to a DVD and play correctly. :/ It is a regular DVD playing in a Blu-Ray player. Wonder if that makes a difference. Hasn't in the past.
     
  15. Fred0149

    Fred0149 Well-Known Member

    In Clone dvd 2, this movie shows 4 titles. Remove the first two titles and all is well. The problem comes when you do movie only, otherwise this will get you movie and previews with no problems.
     
  16. James

    James Redfox Development Team Staff Member

    With AnyDVD 7.3.7.4 ????
    If yes, please post a logfile.
     
  17. Fred0149

    Fred0149 Well-Known Member

    Sorry James, my brother hasn't brought my original disc back, but I was able to use 7371 a few weeks ago to make my full disc copy. I used Clone dvd and had no trouble with playback. The only issue I ever had was with movie only. I've posted the results each week. As I stated, there are four titles in Red 2, and if the first two are removed, you can make a full back-up using clone dvd. As soon as I get my disc back, I'll post a logfile.
     
  18. James

    James Redfox Development Team Staff Member

    It should be very different with 7.3.7.4. Previous versions don't work correctly with this disc.
     
  19. powederburned

    powederburned New Member

    Having similar issues as others with Red 2

    I can rip to hard drive the Red 2 DVD with any dvd without any apparent issue but when I attempt to transcode the DVD folder with Handbreak, the process executes for a couple of seconds and then quits.

    I am using AnyDVD 7.3.8.0 registered and the DVD is Red 2 US.
    I have attached the AnyDVD log as well as the handbreak scan and encode logs for the copied folder in case they are helpful.

    View attachment AnyDVD_7.3.8.0_Info_D_RED_2.ziplog
    View attachment logs.zip

    Movies encoded after the Red 2 attempt have worked without issue.
     
  20. James

    James Redfox Development Team Staff Member

    You should contact the creators of Handbrake and tell them about this issue.