ReClock 1.8.5.1

[James]

Watching PAL DVDs?
Here's why you need ReClock: http://www.schmidt-web.info/malte/english.html
(unfortunately the sound examples were removed from the site... )

http://sandbox.slysoft.com/beta/SetupReClock1851.exe

1.8.5.1 - 13/12/2009
* New: Added support for Arcsoft TMT 3.0. Warning, this will probably not work for everyone!
* Some fixes and improvements

1.8.5.0 - 12/12/2009
* New: Option to specify output sample rate.
* Note: Hardware resampling will always be disabled, if the output sample rate differs from the input sample rate
* New: AC3 encoder can be used with input rates different from 48 kHz
* New: Uninstall added to Windows add/remove programs
* Fix: HD DVD playback with ArcSoft TMT & PowerDVD 7

1.8.4.9 - 16/09/2009
* Change: Reduced size of the vsync window

1.8.4.8 - 14/08/2009
* New: Added support for PowerDVD 9
* New: Added support for PowerDVD 8 build 3017
* Change: Removed "Force ReClock to be loaded in PowerDVD" setting.
* Some fixes and improvements

1.8.4.7 - 06/08/2009
* Change: Improved speaker output configuration with WASAPI
* Change: Improved speaker mapping
* Change: Built-in estimator is now more accurate with higher frame rates

1.8.4.5 - 04/06/2009
* New: Resampler normalizes to avoid clipping
* New: Built-in estimator detects 48 fps sources
* Some fixes and improvements

1.8.4.4 - 05/05/2009
* New: Added two debug registry values for yesgrey3 and leeperry:
ForceSampleRate (in kHz) and BypassResampler (0 or 1), both DWORDs
* Fix: Correct frame rate detection of HD DVDs played back with ArcSoft TMT or PowerDVD 7 (but not latest build)
* Some fixes and improvements

1.8.4.2 - 08/04/2009
* New: Correct frame rate detection of HD DVDs played back with ArcSoft TMT or PowerDVD 7 (but not latest build)
* New: 24fps can be chosen as DVD default frame rate (for some Blu-ray discs)
* New: Added support for madVideoRenderer
* Some fixes and improvements

1.8.4.1 - 31/03/2009
* Change: "Guessing a better media speed when hardware refresh rate does not match" is now enabled by default
* Fix: Setting default DVD frame rate did not work with BD/HD DVD media with ArcSoft TMT 2
* Fix: Option "Always output 16bit for 16bit sources" did not work correctly
* Fix: Option "Always output 16bit for 16bit sources" did not pass through audio bit exact
* Fix: Specifying an audio output format identical to the input format did not pass through audio bit exact
* Some fixes and improvements

1.8.4.0 - 12/03/2009
* New: Installer adds desktop icon for config tool
* New: Added option to force 16bit PCM output for 16bit PCM sources
* New: Added option to allow VSYNC with DXVA (advanced tab)
* Fix: Some (but not all) lipsync issues when input format differs from output format
* Some fixes and improvements

1.8.3.9 - 01/03/2009
* New: Added option to select the desired output format for PCM audio (same as input, 16/24/32 bit PCM or 32 bit IEEE float)
This can be very important for WASAPI / Kernel streaming, as most cards / drivers don't support all formats.
* New: ReClock can automatically change the hardware access method depending on the video renderer (Direct3D for overlay, DirectDraw for anything else).
* New: Added automatic HW access setting in the config tool
* Major enhancements to WASAPI and WAVE playback
* Some fixes and improvements

1.8.3.8 - 26/02/2009
* Major enhancements to WASAPI and WAVE playback
* Some fixes and improvements

1.8.3.7 - 25/02/2009
* New: Replaced Kernel Streaming with WASAPI exclusive (Vista SP1 and up, experimental)
* New: reduced scratching noise when starting wave playback
* Fix: working buffers could be overwritten if media format changed during playback
* Some fixes and improvements

1.8.3.6 - 21/02/2009
* New: Updated resampler to libsamplerate 0.1.7
* Change: Reverting to previous speaker configuration works better under Vista.
* Some fixes and improvements

1.8.3.5 - 20/02/2009
* New: Added option to set matching speaker configuration for PCM sound using WaveOut or DirectSound.
This is very useful if you use a 7.1 surround capable HDMI connector for sound playback, e.g. ATI Radeon 4xxxx.
Works best with DSound output, but WaveOut is supported, too.
* New: DSound / WaveOut devices selection is maintained even if device order changes
* Change: Secondary streams will no longer open any audio device
* Some fixes and improvements

1.8.3.4 - 16/02/2009
* New: Improved frame rate detection accuracy from files of the built-in estimator
* Some fixes and improvements

1.8.3.3 - 29/01/2009
* Fix: Setting a default frame rate in config.exe disabled the built-in estimator
* Some fixes and improvements

1.8.3.2 - 11/01/2009
* New: Setting a manual media frame rate will automatically disable the built in estimators
* Change: Resampler compiler tweaks
* Some fixes and improvements

1.8.3.1 - 09/01/2009
* New: Updated resampler to libsamplerate 0.1.5pre2
* Change: Latency correction for AC3 encoder
* Change: Expiry date removed
* Fix: 32bit floating point audio from ffdshow did not work
* Some fixes and improvements

1.8.3.0 - 03/12/2008
* New: ehrecvr service is now restarted, if it was stopped (see below)
* Change: ehrecvr service isn't brutally killed anymore, it is now stopped via the service manager (if running)
* Change: Expiry date changed to February 2009
* Some fixes and improvements

1.8.2.9 - 02/12/2008
* New: Application loading dialog automatically closes after 10 seconds inactivity
* New: Application loading dialog will be visible in full screen applications, e.g. VMC
* New: Installer kills ehrecvr service, otherwise installation could fail
* New: Uninstaller kills ehrecvr service, otherwise uninstall could fail
* Fix: ReClock could hang when loaded from non interactive processes, e.g. VMC receiver service
* Some fixes and improvements

1.8.2.8 - 01/12/2008
* Change: Some tweaks to hardware detection. It is recommeded to clear your timings cache.
* Fix: GDI and PStrip timings were not deleted when the timings cache was cleared.

1.8.2.7 - 20/11/2008
* New (experimental): Uses pstrip as a reference (if running), or GDI values (if pstrip isn't used)
* New: Vsync support for NV12
* Fix: Latency correction for AC3 encoder
* Some fixes and improvements

1.8.2.6 - 17/11/2008
* New: Application loading dialog is shown from a helper process, this fixes problems with some playback software
* Change: Some tweaks to hardware detection. It is recommeded to clear your timings cache.
* Change: Removed delay after display change notification because of undesired side effects
* Change: Removed saving of timings in regular intervals because of undesired side effects
* Fix: In multiple monitor configurations, first notify event could be triggered with the wrong monitor number
* Fix: Logging could have severe impact on performance
* Some fixes and improvements

1.8.2.5 - 13/11/2008
* New: Added property sheet to define the keyboard shortcuts in the config tool
* New: Better error handling, if "preferred renderer" setting is changed
* Change: Default settings
* Change: As "Set ReClock as preferred renderer" is a system wide setting, it is now stored in HKLM
* Change: Expiry date changed to January 2009
* Some fixes and improvements

1.8.2.4 - 12/11/2008
* Change: STOP events are only triggered from the primary stream
* Fix: "Load always" and "Never load" settings were reversed
* Fix: v1.8.2.3 could be loaded from ReClockHelper and Explorer
* Fix: v1.8.2.1 - 1.8.2.3 had some trouble with STOP events
* Some fixes and improvements

1.8.2.3 - 11/11/2008
* New: Redesigned application loading mechansim.
* New: The hotkey to show the properties window (default is CTRL+ALT+SHIFT+R) will toggle the properties window
* New: Option to make ReClock the default renderer is back
* Fix: Crash of PowerDVD
* Some fixes and improvements

[previous changes removed]

Have fun testing!