Ratatlle Problems

Discussion in 'AnyDVD HD (DVD issues)' started by freebird96, Feb 2, 2008.

  1. freebird96

    freebird96 Member

    I ran Ratatouille through AnyDvd 6.3.1.3 and CloneDvd 2.9.1.5.... after it was done I mounted the image using daemon tools..any dvd still says it is finding stuff. I took the mounted image and ran it back through CloneDvd and it still says the same thing..any ideas? here is what it says...

    This is after AnyDvd and CloneDvd on the original disc..

    DA7555X BYS452U 1.0
    Drive (Hardware) Region: 0 (not set!)

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 1
    Total size: 2288951 sectors (4470 MBytes)

    Video DVD (or CD) label: RATATOUILLE
    Media is not CSS protected.
    Video Standard: NTSC
    Media is region free.

    RCE protection not found.
    Found & removed structural copy protection!
    Found & removed invalid cell pieces!
    Repaired invalid title search pointer table!
    Found & removed bogus title set(s)!
    UDF filesystem patched!
    Autorun not found on Video DVD.
    Found & removed 2 potential bad sector protections!
    Emulating RPC-2 drive with region 1!


    This is after mounting the ISO in Daemon and running it through CloneDvd again..
    Summary for drive F: (AnyDVD 6.3.1.3)
    DA7555X BYS452U 1.0
    Drive (Hardware) Region: 0 (not set!)

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 1
    Total size: 2288917 sectors (4470 MBytes)

    Video DVD (or CD) label: RATATOUILLE
    Media is not CSS protected.
    Video Standard: NTSC
    Media is region free.

    RCE protection not found.
    Found & removed structural copy protection!
    Repaired invalid title search pointer table!
    Found & removed bogus title set(s)!
    UDF filesystem patched!
    Autorun not found on Video DVD.
    Found & removed 2 potential bad sector protections!
    Emulating RPC-2 drive with region 1!

    Any help would be appreciated.
    I went to device manager and set the region on my DVD drive to 1, but when AnyDvd scans it still says region not set.....could that be a problem
     
    Last edited: Feb 2, 2008
  2. Webslinger

    Webslinger Retired Moderator

    Last edited: Feb 2, 2008
  3. Webslinger

    Webslinger Retired Moderator

    No

    But you need to disable Anydvd when you set the region of your drive.

    i. Right click the fox on your toolbar. Exit Anydvd
    ii. Click start. Right click on "My computer"--->select "properties".
    iii.Click on the 'Hardware' tab--->click the 'device manager' button.
    iv. Open the dvd/cdrom branch---> right click on your optical drive
    v. Click "properties".
    vi. You should have a region tab. From there you can select a region.
    vii. Select the region that you're in
    viii. Start Anydvd
     
  4. BigBaaaMack

    BigBaaaMack Well-Known Member

    Video DVD (or CD) label: RATATOUILLE
    Media is not CSS protected.
    Video Standard: NTSC
    Media is region free.


    Wouldn't this indicate a bootleg?:confused:
     
  5. BigBaaaMack

    BigBaaaMack Well-Known Member

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 2055696 sectors (4015 MBytes)
    Total size: 4106096 sectors (8019 MBytes)

    Video DVD (or CD) label: RATATOUILLE
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1!

    RCE protection not found.
    Found & removed structural copy protection!
    Found & removed invalid cell pieces!
    Repaired invalid title search pointer table!
    Found & removed invalid VOBUs!
    UDF filesystem patched!
    Autorun not found on Video DVD.
    Found & removed 21 potential bad sector protections!
    Emulating RPC-2 drive with region 1!
     
  6. DrinkLyeAndDie

    DrinkLyeAndDie Retired Moderator

    Re-read their post again. They said they ripped it and then mounted it with Daemon Tools. :)
     
  7. BigBaaaMack

    BigBaaaMack Well-Known Member

    Ahhh......my bad :eek:
     
  8. freebird96

    freebird96 Member

    There truly was no problem I guess. I burned my backup copy to disc and it works fine. Sorry guys. I was just hesitant to burn it in case I ended up with a nice dvd sized coaster. But all is well:clap: