Problems With AnyDVD

Discussion in 'AnyDVD HD (DVD issues)' started by allstar, Feb 24, 2008.

  1. allstar

    allstar New Member

    About 2/5 times when I try to rip a dvd with anydvd it doesn't work. It gets started ripping to the hard disk and then it pops up with an error message. Usually VOB file xxxxxx.... Anyone know what I am doing wrong or how to fix this? The last dvd I tried was Fracture (2007)

    Thanks.
     
  2. DrinkLyeAndDie

    DrinkLyeAndDie Retired Moderator

    Make sure you are using AnyDVD 6.3.1.5. What software are you using to rip? Are you using the ripper that is part of AnyDVD?

    Take Fracture or one of the other problematic discs and please do the following:

    1) a) Ensure Anydvd is running.
    b) Put the problematic original disc in your optical drive/reader. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload"

    2) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?
     
  3. plano

    plano Active Member

    what you describe isn't a "problems with anydvd" it is problems with your system. either your drive maybe dying or you have set some bad packet writing software if you are getting a problem 40% of the time. I rip ten disks a week and have had the usual difficulties with maybe 5 out of 1000. these very rare new copy protection disks are always pre release and once they are released Anydvd updates and is able to break them. if you have problems with more than 1% of your disks, especially disks not noted here as problems wiht old versions of anydvd, you have some kind of problem inherent to your own system