problem updating to 6.1.8.4

Discussion in 'AnyDVD HD (DVD issues)' started by larryh78, Oct 13, 2007.

  1. larryh78

    larryh78 Guest

    After downloading the updated version, I try running it and near the end of the process it gives me an error(Error open file for writing:C:\Windows\System32\ElbyCDIO.dll). This has opened a couple times to me in the past. I just run current version until I can download an update without getting the error. Any help with this would be greatly appreciated.
     
  2. creeper6996

    creeper6996 Well-Known Member

    I got the same message, but it was because I was running CloneDVD2 in the background. Just to be safe, try running it again with nothing running in the background.
     
  3. Charlie

    Charlie Well-Known Member

    uninstall anydvd and don not save anything then re-install it and apply your key.
     
  4. Webslinger

    Webslinger Retired Moderator

    Disable/uninstall Spybot teatimer. Also do step 1 from here:


    If you're using Vista, then click this.

    If you have Zonealarm on your system, ensure Anydvd is being given permission to access the trusted zone.
    Similarly if you have a firewall, antivirus or spyware program--ensure it's not blocking Anydvd from running.
    Provided you downloaded Anydvd from Slysoft's website, Anydvd is a safe program (you have nothing
    to be paranoid about).

    If you have System Mechanic, System Mechanic Pro, or any kind of registry monitoring program, please ensure
    these programs are allowing Anydvd's installation program to modify your registry--as those programs can block
    Anydvd from installing properly.

    If you keep getting "your trial has ended" messages, despite using your license key
    visit http://forum.slysoft.com/showthread.php?t=196

    If Anydvd says your drive is disabled, ignore the message unless you also receive it
    when you have a movie inserted in that drive.
    Some drives' firmware may report the wrong
    information to Anydvd. Often Anydvd will still function properly.
    visit http://forum.slysoft.com/showpost.php?p=2891&postcount=12 (Zebadee's Anydvd works fine)

    If Anydvd can't see your drives or they aren't listed, click the red fox icon on your toolbar. Navigate to "Drives"-->"Selection".
    Ensure your optical drives are checkmarked.

    Right click the Anydvd icon on your desktop. Click "properties". Click the "Compatibility tab". If you're using
    Windows XP, ensure the box for "compatibility mode" is not selected. -- thanks to vbro for the information

    linx05 says Teatimer enabled on Spybot can cause problems during installation: visit http://forum.slysoft.com/showpost.php?p=36804&postcount=5

    1. Exit out of all Slysoft programs and reinstall

    a) Keep your license key file backed up safely
    b) Uninstall Anydvd (start-->all programs-->Slysoft--->Anydvd-->Uninstall)
    c) Reboot
    d) Try running a registry cleaner program at this point like CCleaner
    e) Download Anydvd http://static.slysoft.com/SetupAnyDVD.exe
    f) Exit all Slysoft programs (including Anydvd, Clonedvd2, Clonecd, Clonecdtray, Clonedvdmobile, etc.). Check Windows Task Manager if you have to.
    g) At this point disable your antivirus and firewall programs
    h) Reinstall
    i) Reboot
    j) Install your license key (if required) http://forum.slysoft.com/showthread.php?t=732
    k) At this point enable your antivirus and firewall programs


    If that doesn't work go on to step 2.

    2. Read http://forum.slysoft.com/showthread.php?t=1307 fully

    3. i. For XP with ide burners
    Click this

    Do what it says to do if you have XP and an ide burner/optical drive.

    ii. For Vista with ide burners

    Go into device manager, and check to ensure you're using standard Microsoft ide busmaster drivers.

    Right click on your PCI IDE Bus Master controller, and remove it. Ensure that it also removes the driver for your DVD/CD rom. Reboot. Your system should find hardware. After your system is finished installing hardware, reboot again.

    click http://forum.slysoft.com/showpost.php?p=48880&postcount=20 to get a better idea of what I'm asking for if you're using Vista.


    4. a) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)

    b) Go to Tools > Filter Driver Load Order. Click "Clipboard". Then paste the information you pasted into your clipboard into your next post (ctrl-v).


    OR

    visit http://forum.slysoft.com/showpost.php?p=21907&postcount=11 (thanks to Zebadee)
    Use one of the programs mentioned, and list your Lowerfilters and Upperfilters in your next post.

    Or for XP users only,
    Click Start, Run
    type regedit
    Go to
    HKEY_LOCAL_MACHINE\SYSTEM\Current Control Set\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}

    We want what's listed in "LowerFilters" and "UpperFilters". List your Lowerfilters and Upperfilters in your next post.

    Before you do this visit http://www.cdr-zone.com/forum/about4719.html, and read the first post please, so you can get a better understanding of what is going on.

    Do not start randomly deleting filters, please.

    5. If Anydvd/Clonedvd2 is locking up at this point, then read http://forum.slysoft.com/showpost.php?p=24297&postcount=4