Please help me to copy

Discussion in 'AnyDVD HD (DVD issues)' started by tracts, Apr 27, 2007.

  1. tracts

    tracts Member

    I installed the trial version of AnyDVD and CloneDVD. When I start the computer AnyDvd starts and reads the discs and runs in the back ground is all I believe it has to do? Then I open Clone DVD and when I point it to Video-TS I believe it is I never get the start button to come up it locks up my computer and I have done reading and uncopied other things that might conflict with it. Any input here would be of great value. Thank you.
  2. tracts

    tracts Member

    cannot copy why?

    I downloaded the trial versions of Any DVD and Clone DVD and then after anydvd started and can see the dvd then I start clone dvd and it says this I copied and am pasting the message here. It says it cannot read this file. File 0 F:/AUDIO_TS/VIDEO_TS.IFO 2 So now it cannot burn it why? but yet I copied a dvd last night of a different title.
  3. tracts

    tracts Member

    will anydvd read and copy CSS?

    I have a movie that is CSS copywrited but I am having problems with it. Is it suppose to burn it with Clone DVD? Also do you check the box in AnyDVD that says use css key archive?
  4. BenGurion

    BenGurion Well-Known Member

    it is not necessary to check this box :)

    AnyDVD will automatically decode the css-protection and so you will have a protection-free copy of your movie :D
  5. BenGurion

    BenGurion Well-Known Member

    maybe there is a new sony-arcoss-protection on the dvd ... what's the title of the movie?
  6. BenGurion

    BenGurion Well-Known Member

  7. tracts

    tracts Member


    title is The Pursuit of Happyness
  8. Webslinger

    Webslinger Retired Moderator

    Please do step 8 from

    Provided you are using Anydvd and Clonedvd and the movie is in region 1, chances are you have a bad original disc even if it plays fine.
  9. Webslinger

    Webslinger Retired Moderator

    tracts, do not create multiple threads about the exact same issue please

  10. tracts

    tracts Member

    copied and pasted.

    Here is the pasted info from anydvd with the drive that contains the disc that will not burn. Summary for drive F: (AnyDVD
    Drive (Hardware) Region: 1

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 2084960 sectors (4072 MBytes)
    Total size: 4169920 sectors (8144 MBytes)

    Video DVD (or CD) label: Pursuit Of Happyness, The
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1!

    RCE protection not found.
    DVD structure appears to be correct.
    Found & removed structural copy protection (Arccos, Puppetlock)!
    Found & removed bogus title set!
    Found & removed Autorun from Video DVD!
    Found & removed 76 bad sector protections!
    Emulating RPC-2 drive with region 1!
  11. mmdavis

    mmdavis Well-Known Member

    There is another thread about the issue with this movie. It was successfully done 2-3 different ways. Read through this thread and see if one of the methods work for you. It should work with AnyDVD and CloneDVD.
  12. tracts

    tracts Member

    region code

    I have been reading here a little about region code. This could be my problem because I cannot even rip the pursuit of happyness with any DVD it cannot read the disc. Can I change a region code on my burner? I am using an asus. Also I waiting for ups to deliever a new liteone. here are the specs what is the region? I don't understand this part can someone please help. Thank you.Brand LITE-ON
    Type DVD Burner
    Model LH-20A1L-05
    DVD-ROM Access Time 160ms
    CD-ROM Access Time 160ms
    Cache 2MB
    WRITE Speed
    DVD+R 20X
    DVD+RW 8X
    DVD-R 20X
    DVD-RW 6X
    CD-R 48X
    CD-RW 32X
    DVD+R DL 8X
    DVD-R DL 8X
    DVD-RAM 12X
    READ Speed
    DVD-ROM 16X
    CD-ROM 48X
    Physical Spec
    LightScribe Support Yes
    Form Factor 5"
    Panel Color Black
    Load Type Tray
    Interface SATA
    Operating Systems Supported Microsoft Windows 2000/XP/Vista
    System Requirements Processor: Pentium 4 1.3Ghz
    RAM: 128MB
    Hard Disk Space: 650MB
    5GB for creating DVD image file
    9GB for creating DVD-DL image file
    HDD Access Time: < 20ms
  13. Webslinger

    Webslinger Retired Moderator

    Last edited: Apr 28, 2007
  14. mike20021969

    mike20021969 Well-Known Member

    for one reason or another,i'm not sure this is the case here,but a lot of people do seem to be using not the latest versions of the program(s) available-maybe for some reason the program isn't checking for the latest version when the internet is connected or when the program is started.
    maybe at the top of each relevent thread (AnyDVD HD,CloneDVD2,CloneCD,CloneDVD Mobile) there should be a sticky in BOLD stating something like Are You Running The Latest Version Of CloneDVD2? for example.
    i know this is the case when you click the AnyDVD Topic:
    ''Sticky: Anydvd released''
    maybe it should apply to the others too.just an idea;)
  15. Webslinger

    Webslinger Retired Moderator

    In the guides, etc., that I have stickied, I have always stated to please ensure you're using the latest versions of Slysoft software.
  16. tracts

    tracts Member


    Yes I am using the newest version
    Also do you think if it is not being read that if I change my DVD burner to a new Liteon I might have better luck? I ordered one and will let you know. Does this matter sometimes?
  17. tracts

    tracts Member

    Figured it all out

    Ok I tried DVD Decoder would not work either. But if I let AnyDVD read the disk then it gives me options one being to Rip it to the harddrive with DVD Decoder. So when I do that I am then able to use clonedvd2 to copy it from the harddrive. WOW! I have no done 5 out of 5 100%