Pirates 3

Discussion in 'AnyDVD HD (DVD issues)' started by showchef, Dec 13, 2007.

  1. showchef

    showchef Member

    I am getting failure errors on this movie. Any one else having the same.

    i am running 6.3.0.0 and i use either dvd shrink/nero to burn it or dvd cloner 4 0r 5.
     
  2. Charlie

    Charlie Well-Known Member

    What version of Nero? Get rid of DVD Cloner 4.

    It will work in shrink I tested that.


    2. a)Click the red fox icon on your toolbar.
    b) Navigate to "Program Settings".
    c) Click "enable logging".
    d) Click "ok".
    e) Put the problematic original disc in your optical drive/reader.
    f) Go to your My Documents folder
    g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"
     
  3. Webslinger

    Webslinger Retired Moderator

    1. Update to Anydvd 6.3.0.1: click http://forum.slysoft.com/showthread.php?t=10591

    2.a)Click the red fox icon on your toolbar.
    b) Navigate to "Program Settings".
    c) Click "enable logging".
    d) Click "ok".
    e) Put the problematic original disc in your optical drive/reader.
    f) Go to your My Documents folder
    g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"

    3) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?

    4) click http://forum.slysoft.com/showthread.php?t=328 and read fully please
     
  4. bilbo65

    bilbo65 Well-Known Member

    Again, thats AnyDVD 6.3.0.1 beta...
     
  5. showchef

    showchef Member

    thanx.....


    trying now, but what is a good burning software i can use that is dependable???
     
  6. Charlie

    Charlie Well-Known Member

    CloneDVD2 or CloneCD.
     
  7. Webslinger

    Webslinger Retired Moderator

    Trying what now? We still have no clue what problem it is that you're having; you didn't provide the requested information.
     
  8. showchef

    showchef Member

    this is the error i am getting. i am still new at this program so learning the kinks as well. i did enable logging.





    1A20-920E-0012-2525-1282-4753*

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 11:54:32 AM

    NT-SPTI used
    Nero API version: 6.6.1.15
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Internal Version: 6, 6, 1, 15

    Recorder: <LITE-ON DVDRW LDW-811S> Version: HS0Q - HA 1 TA 1 - 6.6.1.15
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : SAMSUNG SP2014N atapi Port 0 ID 0 DMA: On
    DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW LDW-811S atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8162B E: CDRom0
    LITE-ON DVDRW LDW-811S F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1534MB (1571824kB)
    Free physical memory: 1072MB (1098124kB)
    Memory in use : 30 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    13.12.2007
    NeroAPI
    11:29:34 PM #1 Phase 112 File APIProgress.cpp, Line 275
    DVD-Video files reallocation started

    11:29:34 PM #2 DVDREALLOC -21 File DVDVideoCompilation.cpp, Line 1198
    Required file 'VTS_02_0.VOB' is not present

    11:29:34 PM #3 Phase 115 File APIProgress.cpp, Line 275
    DVD-Video files reallocation failed

    11:29:34 PM #4 Text 0 File NeroAPIBurnFS.cpp, Line 213
    Failed to realloc DVD video files


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=3.00.20a, size=46080 bytes, created 3/9/2006 2:00:00 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  9. Webslinger

    Webslinger Retired Moderator

    Follow the steps as requested this time please (step by step and in the order of appearance):

    1. Update to Anydvd 6.3.0.1: click http://forum.slysoft.com/showthread.php?t=10591

    2.a)Click the red fox icon on your toolbar.
    b) Navigate to "Program Settings".
    c) Click "enable logging".
    d) Click "ok".
    e) Put the problematic original disc in your optical drive/reader.
    f) Go to your My Documents folder
    g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"

    3. Right click the red fox icon on your toolbar. Select "Rip video-dvd to harddisk". After you finish ripping, import that rip into Shrink.