Not Just the Best of Larry Sanders - issues

Discussion in 'AnyDVD HD (DVD issues)' started by Rey Scorpio, Apr 18, 2007.

  1. Rey Scorpio

    Rey Scorpio New Member

    I have the latest AnyDVD/HD installed 6.1.3.6. Here's the tech info of the copied disc [
    (AnyDVD 6.1.3.6)
    PIONEER DVD-ROM DVD-115 1.33 2001/02/05PIONEER
    Drive (Hardware) Region: 1

    Media is a DVD.
    Booktype: dvd+r (version 1), Layers: 1
    Total size: 2253536 sectors (4401 MBytes)

    Video DVD (or CD) label: DVD_VIDEO
    Media is not CSS protected.
    Video Standard: NTSC
    Media is region free.

    RCE protection not found.
    DVD structure appears to be correct.
    Found & removed bogus title set!
    Autorun not found on Video DVD.
    Found & removed 1 bad sector protections!
    Emulating RPC-2 drive with region 1!

    NJTBLS (appears to copy fine however upon playback there are no menus and it goes through the FBI Warning and ends?! If I select the title menu and select individual chapters the "data" is there and can be viewed.

    I've never had any such problem before and as recently as last week I copied the Good Shephard without incident.

    I use 1click DVD copy as my writing application.

    Is a Anydvd/hd update needed in order to copy the NJTBLS correctly?
     
    Last edited: Apr 18, 2007
  2. Webslinger

    Webslinger Retired Moderator

    1. We need the info from the original disc please--and not from your dvd+r backup (which by the way should probably be bitset to "dvd-rom"; See step 3)

    2. I'm not very familiar with 1-Click (I know a little, but not much about it). I would recommend posting your question in 1-Click's forums, as your issue mostly applies to using 1-Click
     
    Last edited: Apr 18, 2007
  3. Rey Scorpio

    Rey Scorpio New Member

    Thank you for the bit setting advice, I will change it and see if it resolves the playback issue on another copy. If it does not I will post the info from the original dvd as requested.
     
  4. Webslinger

    Webslinger Retired Moderator

    Please ensure you're also using the latest update of 1-Click.
     
  5. mmdavis

    mmdavis Well-Known Member

    Also, remember if using AnyDVD with 1Click that you need to disable (uncheck) cprx protection in 1Click. Right-click in the program to check, should be the last option.