My problem with The Kingdom

Discussion in 'AnyDVD HD (DVD issues)' started by pghpunk, Dec 27, 2007.

  1. pghpunk

    pghpunk Member

    I too have had this same problem - last week I encountered the same mess with Balls Of Fury. With that disc I returned it for a new one and had no problems. With The Kingdom I am now on my 4th disc and I still cannot get this to work. I have tried 3 different DVD drives on 2 different computers and nothing is working! If anyone has any help other than "it worked for me" it would be greatly appreciated by those of us who are stuck with this one!

    Thanks!
     
  2. Will Yaknowme

    Will Yaknowme Well-Known Member

    Well, it will actually help if you gave us more information.

    WY
     
  3. Webslinger

    Webslinger Retired Moderator


    1. Do not post in other people's troubleshooting threads unless you want to help them please. click http://forum.slysoft.com/announcement.php?f=18 and read fully

    2) a)Click the red fox icon on your toolbar.
    b) Navigate to "Program Settings".
    c) Click "enable logging".
    d) Click "ok".
    e) Put the problematic original disc in your optical drive/reader.
    f) Go to your My Documents folder
    g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"

    3) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?
     
  4. pghpunk

    pghpunk Member

    When using DVD Shrink (along side Any DVD) it gets stuck during it's analyzing process at 73% with a Cyclical Redundancy Error. When using CloneDVD2 it gets stuck near the exact same spot. When using DVDFab Platinum same problem. This has happened on all the discs I have tried as well as the DVD drives I tried.
     
  5. pghpunk

    pghpunk Member

    sorry - I am in the process of acquiring the log file now - I'll post it as soon as I get it!

    Thanks!
     
  6. pghpunk

    pghpunk Member

    Here is the zip file that was requested
     

    Attached Files:

  7. Webslinger

    Webslinger Retired Moderator

    State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?
     
  8. Webslinger

    Webslinger Retired Moderator

    James hates this filter. Typically it comes with HP software or as an Oak cd driver.

    i) Create a backup of your registry
    ii) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)
    iii) Go to Tools > Filter Driver Load Order. Select "AFS2K". Click "Remove Selected Filter". Click "ok".
    iv) Reboot

    The program that installed that filter will no longer function properly (in all likelyhood).
     
  9. Webslinger

    Webslinger Retired Moderator

    There's no protection on this disc other than CSS. In other words, this disc is pretty basic.


    Download Nero cd-dvd speed. It's a free program. With Anydvd running in the background, select the tab labeled "scandisc". Select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your disc is (probably) bad and needs to be exchanged--even if it plays fine (or your optical drive could be slowly dying).
     
  10. pghpunk

    pghpunk Member

    Ok - so here is what I have. The disc I bought (r1 WS) gets about halfway through when using Nero CD Speed and documents bad sectors. I went down the street and rented a copy from Redbox and it does the exact same thing. Every other disc I use works perfectly just this disc!
     
  11. Webslinger

    Webslinger Retired Moderator

    Lots of bad original discs were made then

    Drinklyeanddie once exchanged a disc 10 times at a store (granted, it wasn't this movie, but the point is bad original discs are no longer uncommon).

    Instead, you should return the original disc you bought.
     
    Last edited: Dec 27, 2007
  12. pghpunk

    pghpunk Member

    I did - many times so far - and I'm going to do the same with my current disc.

    this is just getting frustrating!
     
  13. Webslinger

    Webslinger Retired Moderator

    You can also try cleaning the disc.

    Just sounds as though a lot of bad discs were made for this movie
     
  14. jp20049

    jp20049 Guest

    If PghPunk is from Pittsburgh, could it be a bad batch of discs? I too am from that area and have had the same, and I mean exactly the same problems (in dvd shrink & clonedvd2) that pghpunk listed in the earlier posts.
     
  15. Webslinger

    Webslinger Retired Moderator

    Yes, it could. It would be one thing if these discs had some serious structural protection on them, but they don't. Pretty basic . . .

    Another thing that you can try doing (I notice a lite-on drive is being used) is to reduce the read speed of the drive, and see if that helps.
    You can try enabling speed control in Anydvd.
     
    Last edited: Dec 28, 2007
  16. pghpunk

    pghpunk Member

    Yes from Pittsburgh and I took the disc back TWO MORE TIMES today and still having the same results. I'm almost positive that it's not the drive because I have check other drives to no avail. The Giant Eagle that I purchased the disc at will no longer accept my return - they say I have to go through the manufaturer or contact GE's home office! I can't blame them - I have wiped out their inventory of this movie!
     
  17. Webslinger

    Webslinger Retired Moderator

    Well, you can follow my instructions and delete the filter. Try again.

    And if that doesn't work, then I would complain to the manufacturer.

    Quality control simply is going down the tubes more frequently.
     
  18. DrinkLyeAndDie

    DrinkLyeAndDie Retired Moderator

    It may be a bit annoying but IMHO you cannot just accept and keep what I am willing to bet is a bad disc. If they don't wish to replace the disc for another then, personally, I would demand my money back in full so that I could go elsewhere and purchase the disc since they, obviously, have nothing but a bad batch. If they argue that, and likely will, then I'd have no issues contacting their home office and explaining the situation. You are buying bad discs that they received from their supplier. The company should be very concerned because you are not the only person getting bad discs from their store. I'm pretty stubborn about getting what I paid for.

    I'd still follow Webslinger's advice as well, though. :)
     
  19. ridhst

    ridhst Well-Known Member

    The Kingdom

    The Kingdom works fine with CloneDVD 2912 and AnyDVD 6303. I have copied my discs and it worked great
     
  20. Pelvis Popcan

    Pelvis Popcan Well-Known Member

    That is of absolutely no help whatsoever to the original poster.