My problem with Pirates

Discussion in 'AnyDVD HD (DVD issues)' started by Jaybo, Dec 4, 2007.

  1. Jaybo

    Jaybo Member

    You are using an R1 (Region 1) Disc version of Pirates 3. Correct? I thought these kinds of errors were a thing of the past, but alass, , , not.

    The error you are getting is a "cyclic redundancy" check. This error is causing you the problem.

    My suggestion:

    Try using your burner to read the disc, (Slower Speed) use movie only feature to create your backup.

    Regards,
    :)
     
  2. Webslinger

    Webslinger Retired Moderator

    No. It's not. In Generic's case, the output directory may not have been properly specified (wrong drive letter, for instance). Since Clonedvd worked fine the problem is likely due to not setting the output path in Anydvd ripper properly--or possibly not having (at the time) enough free disc space on the hard drive. A File IO 4 error is not a read error; it means that Anydvd cannot write to the harddrive. In your case, you're getting a read error message. These are two separate issues.
     
    Last edited: Dec 5, 2007
  3. Jaybo

    Jaybo Member

    Sorry Webslinger, , , that is the error I am seeing here, , and it's on vts4.
     
  4. Webslinger

    Webslinger Retired Moderator

    What is the full error message you're seeing? FileIO 4 is not a reading error.
     
    Last edited: Dec 4, 2007
  5. Jaybo

    Jaybo Member

    The error reads as follows:

    Video_TS/VTS_04_1.Vob:read error

    Copy Protection Error-The read failed because the sector is encrypted.

    From what else I can see, , , it has to do with the picture reader.

    Regards,
     
  6. Webslinger

    Webslinger Retired Moderator

    1. That's not the full error message. Please provide the full error message.

    2. a)Click the red fox icon on your toolbar.
    b) Navigate to "Program Settings".
    c) Click "enable logging".
    d) Click "ok".
    e) Put the problematic disc in your optical drive/reader.
    f) Go to your My Documents folder
    g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"


    3. Anydvd 6.3.0.0 handles the R1 version of this disc perfectly fine: click http://forum.slysoft.com/showpost.php?p=70814&postcount=1

    4. Ensure you're using the default settings in Anydvd. Click the red fox icon on your toolbar. Click the "default" button. Click "ok". Try again.

    5. Download Nero cd-dvd speed. It's a free program. With Anydvd running in the background, select the tab labeled "scandisc". Select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your disc is (probably) bad and needs to be exchanged--even if it plays fine (or your optical drive could be slowly dying).
     
    Last edited: Dec 4, 2007
  7. Jaybo

    Jaybo Member

    Webslinger,

    Please do not talk down to me. I have worked with AnyDVD for years, I know how the software is to work.

    More of the error is:
    File 1 E:/VIDEO_TS/VTS_04_1.VOB 23 TCSectorReader

    Regards,
     
    Last edited: Dec 4, 2007
  8. Webslinger

    Webslinger Retired Moderator

    I was not "talk[ing] down to you." I was trying to help you.


    Well then I'm sure you can figure out this problem yourself. However, please do not post about unrelated issues you're having in other people's troubleshooting threads in the future. Thank you

    click http://forum.slysoft.com/announcement.php?f=18 and read fully please

    Steps 2,3,4, and especially 5 still apply from my previous post
     
    Last edited: Dec 4, 2007
  9. Jaybo

    Jaybo Member

    Aren't we the two good Samaritans, , , I was trying to help him too. I'm not trying to be sarcastic.

    I already found the workaround to create my backup, from the original I purchased today.

    So, I'll butt out of you helping other folks.

    Regards,
     
  10. Webslinger

    Webslinger Retired Moderator

    O.k. I wasn't being sarcastic either. I was honestly trying to help you.
    /shrug
     
    Last edited: Dec 4, 2007
  11. Jaybo

    Jaybo Member


    Webslinger,

    Was their a glitch in the forum software? About every other time I refresh the page, this thread was part of Generic's thread, and another time it's a thread by it's self. That's got us confused.

    Regards,
     
  12. Webslinger

    Webslinger Retired Moderator

    I separated the posts into separate threads. Generic's issue is a FileIO 4 problem (which means that Anydvd ripper cannot write to the harddrive). The problem he had was his hard drives overheated--or possibly that he was having an issue ripping to an external hard drive.

    Your issue is a read error on the original disc (which points towards a bad original disc even if it plays fine). These are two separate unrelated issues.
     
    Last edited: Dec 5, 2007