Mr. Woodcock / Good Luck Chuck / 3:10 to Yuma

Discussion in 'AnyDVD HD (DVD issues)' started by jkh206, Jan 18, 2008.

  1. jkh206

    jkh206 New Member


    On all three of these discs I am utilizing Anydvd with 1 Click Pro. I had no problems burning and copying Good Luck Chuck or 3:10 to Yuma but Mr. Woodcock would not copy. The other 2 are relative because for each one with 1 click pro I am getting the following message:

    "The process AnyDVD was detected with the copy protection based on unreadable sectors setting enabled. This setting is not compatible with the concurrent use of 1 Click Pro's CPRx setting. We recommend you disable CPRx if you wish to use AnyDvd for bad sector error correction. click the OK button to disable CPRx setting for this dvd."

    My code is as follows: SONY DVD RW DRU-840A SS01 JUL12 ,2007
    Drive (Hardware) Region: 0 (not set!)

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 2073408 sectors (4049 MBytes)
    Total size: 4130072 sectors (8066 MBytes)

    Video DVD (or CD) label: MR_WOODCOCK
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1!

    RCE protection not found.
    Found & removed structural copy protection!
    Found & removed invalid cell pieces!
    Found & removed bogus title set(s)!
    Found & removed invalid VOBUs!
    UDF filesystem patched!
    Found & removed Autorun from Video DVD!
    Found & removed 17 potential bad sector protections!
    Emulating RPC-2 drive with region 1!

    I am clicking OK on this and it is still not burning. I am using AnyDVD version 6.3.09 and 1 CLick Pro version , Any suggestions. Also what should my AI Scanner be set to? Thanks.
    Last edited: Jan 18, 2008
  2. Webslinger

    Webslinger Retired Moderator

    You either must disable CPRx in 1-Click or disable copy protection based on unreadable sectors in Anydvd.

    Or . . .

    1. Use Anydvd beta: click

    You may need to reboot after installing if prompted to do so.

    2. Click the red fox icon on your toolbar. Click "default". Click "ok".

    3. Right click the red fox icon, and select "rip video dvd to harddisk." Choose your source and destination paths. Click "Copy", and wait for Anydvd ripper to finish. You can then import that rip into whatever program you want.

    4. If you still have problems, then . . .

    A) a) Ensure Anydvd is running.
    b) Put the problematic original disc in your optical drive/reader. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload"

    B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?
  3. Webslinger

    Webslinger Retired Moderator


    i. Right click the fox on your toolbar. Exit Anydvd
    ii. Click start. Right click on "My computer"--->select "properties".
    iii.Click on the 'Hardware' tab--->click the 'device manager' button.
    iv. Open the dvd/cdrom branch---> right click on your optical drive
    v. Click "properties".
    vi. You should have a region tab. From there you can select a region.
    vii. Select the region that matches the region on the disc
    viii. Start Anydvd
  4. DrinkLyeAndDie

    DrinkLyeAndDie Retired Moderator

    I would highly recommend that you rip the disc to your HDD using the AnyDVD ripper. Once you have done that then you can process the disc with 1-Click.

    All recent New Line releases must be ripped with the AnyDVD ripper or CloneDVD for the best results when dealing with AnyDVD.

    Leave the A.I. Scanner at the default setting: Automatic (Default).
    Last edited: Jan 18, 2008
  5. Webslinger

    Webslinger Retired Moderator

    For further information on how to disable CPRx, click

    And you're likely using the wrong version of Anydvd, which you omitted when pasting the Anydvd status screen info.
    Last edited: Jan 18, 2008