Mission Impossible 4

Discussion in 'AnyDVD HD (DVD issues)' started by noaynadie, Mar 29, 2012.

Thread Status:
Not open for further replies.
  1. ZoSoIV

    ZoSoIV Well-Known Member

    there should be a fix for it very soon
     
  2. starfire96

    starfire96 New Member

    Mi4

    I am not having issues at all with MI4 with the new version or the beta version of anyDVD. Its cloneDVD i am having issues with. There is no quality bar at the bottom when using this on MI4. also i posted earlier a log from cloneDVD, however no one said it was any good. So i am trying again. I wish to help as much as possible to get this resolved. The log says Error at CloneMap2 TCE. Now i know a little about a lot and a lot about a little. So hope at the end of the tunnel for some.

    Thanks SlySoft Team. You guys work wonders ^_^

    Star
     
  3. Clams

    Clams Well-Known Member

    The problem with this disk is the lack of ability to get a viable logfile.
    Failing that, the disk will get over-nighted to the Cods, who will sort it out in short order.

    -W
     
  4. starfire96

    starfire96 New Member

    Mi4

    ok i think i worked it out. When you try to use Clone dvd . go to clone whole dvd. it should show up the quality bar and show like 50 percent disk space. from there you should be able to remove the other titles and leave only the main movie and hit the next button. when it process it should run to 86 percent disk compression. then hit next. choose your destination file and hit next. it should run no problems on mine it showed layer removal successful. Why it does not do this in only using the title movie option. That is beyond me. I am waiting for it finish. cloneDVD finished its work. Although when i try to create a logfile for anydvd it gives me an error. So i am copy and paste this:

    Summary for drive D: (AnyDVD 7.0.2.7, BDPHash.bin 12-04-13)
    ASUS DRW-24B1STA 1.04 2010-10-12 13:07
    Drive (Hardware) Region: 1

    Current profile: DVD-ROM
    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 1963088 sectors (3834 MBytes)
    Total size: 3593776 sectors (7019 MBytes)

    Video DVD (or CD) label: MISSION_IMPOSSIBLE_4
    Media is CSS protected!
    Media is locked to region(s): 1 4!
    Video Standard: NTSC

    Using local database!
    Found & removed structural copy protection!
    Found & removed invalid cell pieces!
    Found & removed bogus title set(s)!
    Found & removed invalid VOBUs!
    Found & removed RCE protection!
    UDF filesystem patched!
    Autorun not found on Video DVD.
    Removed CSS copy protection!
    Found & removed 15 potential bad sector protections!
    Emulating RPC-2 drive with region 1!


    Will try again later to help.
     
    Last edited: Apr 18, 2012
  5. scotton

    scotton Well-Known Member

    logfile mi4

    Attached logfile-hope it helps!!
     

    Attached Files:

  6. Clams

    Clams Well-Known Member

    Is this from an original disk?

    -W
     
  7. scotton

    scotton Well-Known Member

    Yes from original-Had a hard time as anydvd just keeps scanning and disk is not seen by windows but I created log file.
     
  8. jonestown

    jonestown New Member

    Keep the menus in MI4

    I'm having the same issue as starfire96, with a MI4 rental DVD. It seems that when you remove the menu in CloneDVD, either by using Copy DVD Titles or Clone DVD checkbox the read will fail. The Copy DVD Titles option shows with a grayed out quality bar. Keeping the menus seems to be the key to making a successful copy. AnyDVD scanned the DVD correctly, unless there is a new form of protection we don't know about.
     
  9. reddodge

    reddodge New Member

    I used 7.0.2.0 and didn't have any problems. I couldn't create a log file as it seemed to lock up while scanning. I verified the back up as correct (at least by scanning through the titles and menu).
     
  10. snafu2382

    snafu2382 New Member


    same here
    can't create log file, it never stops scanning v7.0.2.7
     
  11. bobk82

    bobk82 New Member

    Hi Ben watching hoping they would find the fix so I try what someone else said I redownloaded 7.0.2.0 then shut down my computer all the way not just restart it and anydvd worked when I clicked rip to hard drive then I used another burning program to copy the DVD to a DVD looks like it has no problems I will not say what burning program I used don,t want to get in trouble saying it so you can give it a try
     
  12. commodon

    commodon Member

    FWIW in my use AnyDVD HD 7.0.2.0 reflects the following information after scanning

    Summary for drive D: (AnyDVD HD 7.0.2.0, BDPHash.bin 12-03-09-A)
    HL-DT-ST DVDRWBD CT30N A200 11/01/13 7U01
    Drive (Hardware) Region: 1

    Current profile: DVD-ROM
    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 1963088 sectors (3834 MBytes)
    Total size: 3593776 sectors (7019 MBytes)

    Video DVD (or CD) label: MISSION_IMPOSSIBLE_4
    Media is CSS protected!
    Media is locked to region(s): 1 4!
    Video Standard: NTSC

    Using local database!
    Removing annoying menu clips!
    Removed 2 annoying menu clips!
    Found & removed structural copy protection!
    Found & removed invalid cell pieces!
    Found & removed bogus title set(s)!
    Found & removed invalid VOBUs!
    Found & removed RCE protection!
    UDF filesystem patched!
    Autorun not found on Video DVD.
    Removed CSS copy protection!
    Found & removed 35 potential bad sector protections!
    Emulating RPC-2 drive with region 1!
     
  13. Epic

    Epic New Member

    FYI
    Right-Click Rip video DVD to Hardisk... v7.0.2.0 ---> AutoGK Xvid seems to work fine.
     
  14. studmonkey76

    studmonkey76 Member

    Im using the newest version of anydvd and it broke the protection just fine doing movie only...
     
  15. idwolfie

    idwolfie Member

    Mi 4

    I don't know if this log file will help. The only way I could complete a anydvd scan what to uncheck the copy protection based on unreadable sectors in the settings. Here is the log file it made
     

    Attached Files:

  16. nrhudson

    nrhudson New Member

    MI4 log files from AnyDVD and CloneDVD

    Could not get a successful rip of the movie. Any DVD does present the disk after scanning. Using 7.0.2.0 AnyDVD, using CloneDVD 2.9.3.0. Error on create DVD using clonedvd and logs uploaded for review from both products.
     

    Attached Files:

    • mi4.zip
      File size:
      1.3 KB
      Views:
      1
  17. rnrwang

    rnrwang New Member

    CloneDVD2 cannot rip MI4

    I got the DVD of Ghost Protocol. Had to update my AnyDVD to 7.0.2.0. Or else it never stop scanning. After reboot, CloneDVD2 still cannot rip Ghost Protocol. It works with all the other titles.
     
  18. Panthera4142Male

    Panthera4142Male Well-Known Member

    i was able to copy the entire disc but when i try and make a log file it just keeps scanning and doesn't stop scanning

    here is what shows up when i just copy the info


    Summary for drive D: (AnyDVD HD 7.0.2.7, BDPHash.bin 12-04-13)
    PLDS DVD-RW DH16ABSH YL32 2010/08/16 17:05
    Drive (Hardware) Region: 2

    Current profile: DVD-ROM
    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 1963088 sectors (3834 MBytes)
    Total size: 3593776 sectors (7019 MBytes)

    Video DVD (or CD) label: MISSION_IMPOSSIBLE_4
    Media is CSS protected!
    Media is locked to region(s): 1 4!
    Video Standard: NTSC

    Using local database!
    Found & removed structural copy protection!
    Found & removed invalid cell pieces!
    Found & removed bogus title set(s)!
    Found & removed invalid VOBUs!
    Found & removed RCE protection!
    UDF filesystem patched!
    Autorun not found on Video DVD.
    Removed CSS copy protection!
    Found & removed 15 potential bad sector protections!
    Emulating RPC-2 drive with region 1!
     
  19. kalliseppel

    kalliseppel Member

    Have you recognized that we are talking about the Blu-Ray-Version? :doh:
    And... yes! MI:4 (DVD) is still a problem... as you can read in the release notes!
     
  20. ArnieG

    ArnieG Member

    thanks to both you guys. Maybe I'll wake up in the morning and an update will be available?
     
Thread Status:
Not open for further replies.