Lost 3

Discussion in 'AnyDVD HD (DVD issues)' started by MARKIVO, Nov 7, 2007.

  1. MARKIVO

    MARKIVO New Member

    Has Anyone Had Problems Backing Up Lost3,disc2?i Am Using Any Dvd 6.1.9.5 With Clone Dvd.also Tried Shrink And Backing To Hard Drive.
     
  2. Charlie

    Charlie Well-Known Member

    Post the Anydvd zip file to the forums

    a)Click the red fox icon on your toolbar.
    b) Navigate to "Program Settings".
    c) Click "enable logging".
    d) Click "ok".
    e) Put the problematic disc in your optical drive/reader.
    f) Go to your "My Documents" folder
    g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"
     
  3. MARKIVO

    MARKIVO New Member

  4. Webslinger

    Webslinger Retired Moderator

    What problem are you having?

    State the full a)error message(s) you encountered, b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s).
     
  5. Webslinger

    Webslinger Retired Moderator

    I need a full error message please.

    And please do not create multiple threads about the exact same thing.

    Also, please ensure the AI scanner is enabled in Anydvd.

    i. Right click the fox on your toolbar. Exit Anydvd
    ii. Click start. Right click on "My computer"--->select "properties".
    iii.Click on the 'Hardware' tab--->click the 'device manager' button.
    iv. Open the dvd/cdrom branch---> right click on your optical drive
    v. Click "properties".
    vi. You should have a region tab. From there you can select a region.
    vii. Select the region that matches the region on the disc
    viii. Start Anydvd
     
  6. MARKIVO

    MARKIVO New Member

    I Am Only Using Clonedvd & Any Dvd.the Error Said-clonedvd Encountered A Problem And Needs To Close About 20% Through.
     
  7. Webslinger

    Webslinger Retired Moderator

    While that could happen for any number of reasons, try checking your disc . . .

    Download Nero cd-dvd speed. It's a free program. With Anydvd running in the background, select the tab labeled "scandisc". Select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your disc is (probably) bad and needs to be exchanged--even if it plays fine (or your optical drive could be slowly dying).