Lion King-copied no problem, but...

Discussion in 'AnyDVD HD (DVD issues)' started by swizel, Nov 29, 2007.

  1. swizel

    swizel Member

    No problem or error messages using clone dvd/ any dvd to make a copy of Lion King but it will not play in any dvd player or my computer. I have never ran into this issue. I even picked up another copy in case the original was somehow corrupted. I also burned it to the hard drive and then used clone dvd to rip it. Still didn't work. Any ideas? I have the latest versions as well.

    Thanks
     
  2. Webslinger

    Webslinger Retired Moderator

    Please always state version numbers.


    1. Update to Anydvd 6.2.0.2: click http://forum.slysoft.com/showthread.php?t=10074

    2. a)Click the red fox icon on your toolbar.
    b) Navigate to "Program Settings".
    c) Click "enable logging".
    d) Click "ok".
    e) Put the problematic disc in your optical drive/reader.
    f) Go to your My Documents folder
    g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"

    3. Can you watch the original disc on your computer with Anydvd running in the background? Does the original disc play fine?

    4. Check to see if there's an updated firmware version for your burner: click http://forum.slysoft.com/showpost.php?p=12794&postcount=10

    5. What blank media are you using? Specify a) brand name b)type (-R, +R, -RW, +RW, RAM, DL, etc.) c)media code, d) capacity/size, e) batch codes/serial codes (often found printed on the inner plastic hub of the blank disc), and f)country (factory information would be great as well, if possible) where the media was made (look on the physical packaging; do not rely on programs to accurately give you this information).

    If you don't know how to obtain media codes, you may find the following programs useful:

    http://dvd.identifier.cdfreaks.com and http://www.dvdinfopro.com/

    6) At what speed are you burning your blank media?
     
  3. swizel

    swizel Member

    .zip uploaded
     

    Attached Files:

  4. Webslinger

    Webslinger Retired Moderator

    Please answer the rest of the questions as well.
     
  5. Webslinger

    Webslinger Retired Moderator

    And you didn't update to 6.2.0.2 yet like I asked.
     
  6. Webslinger

    Webslinger Retired Moderator

    Use the original disc please--not your backup.
     
  7. swizel

    swizel Member

    I cannot watch the original with any dvd running in the background. It will play when the program is diabled though
    thanks
     
  8. Webslinger

    Webslinger Retired Moderator


    1. Update to Anydvd 6.2.0.2: click http://sandbox.slysoft.com/beta/SetupAnyDVD6202.exe

    2. a)Click the red fox icon on your toolbar.
    b) Navigate to "Program Settings".
    c) Click "enable logging".
    d) Click "ok".
    e) Put the ORIGINAL disc in your optical drive/reader.
    f) Go to your My Documents folder
    g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"

    3. Check to see if there's an updated firmware version for your burner: click http://forum.slysoft.com/showpost.php?p=12794&postcount=10

    4. What blank media are you using? Specify a) brand name b)type (-R, +R, -RW, +RW, RAM, DL, etc.) c)media code, d) capacity/size, e) batch codes/serial codes (often found printed on the inner plastic hub of the blank disc), and f)country (factory information would be great as well, if possible) where the media was made (look on the physical packaging; do not rely on programs to accurately give you this information).

    If you don't know how to obtain media codes, you may find the following programs useful:

    http://dvd.identifier.cdfreaks.com and http://www.dvdinfopro.com/

    5) At what speed are you burning your blank media?
     
  9. swizel

    swizel Member

    Sorry about that. I sent the .zip with the original disc info. I am using TDK, DVD-R, 16X, 4.7GB. Speed preferred is set to maximum

    thnaks again
     

    Attached Files:

  10. Webslinger

    Webslinger Retired Moderator


    1. Update to Anydvd 6.2.0.2: click http://sandbox.slysoft.com/beta/SetupAnyDVD6202.exe

    2.
    Disable "Remove annoying adverts and trailers". That feature doesn't work with all discs.

    Click the red fox icon on your toolbar. Click "default". Click "ok".

    3. With Anydvd 6.2.0.2 installed

    a)Click the red fox icon on your toolbar.
    b) Navigate to "Program Settings".
    c) Click "enable logging".
    d) Click "ok".
    e) Put the ORIGINAL disc in your optical drive/reader.
    f) Go to your My Documents folder
    g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"

    4. Don't use TDK. Use Taiyo Yuden (not Valueline) or Verbatim (preferably not made in India)

    5. Don't burn at max. Burn at 8x or 12x

    6. Update your burner's firmware: click http://forum.slysoft.com/showpost.php?p=12794&postcount=10
     
    Last edited: Nov 29, 2007
  11. Webslinger

    Webslinger Retired Moderator

    Update to Anydvd 6.2.0.2 and disable "Remove annoying adverts and trailers".

    Now can you watch the original disc with Anydvd running in the background?
     
  12. swizel

    swizel Member

    I went to the download page. I have the current 6.2.0.1. I do not see 6.2.0.2
    thanks
     
  13. swizel

    swizel Member

    Original movie now plays. Version updated as well
     

    Attached Files:

  14. Webslinger

    Webslinger Retired Moderator

    Do not use the "remove annoying adverts" feature with this disc then. That feature does not work with all discs. If you create a backup it should now work, provided you use decent blank media (Taiyo Yuden or Verbatim) and don't burn at max speed.