Lg Gsa-h55n

[d18036a]

CloneDVD copies the dvd fine but when It come to writing I can leave it run for an hour and nothing is happening. Sometimes the computer will freeze. I uninstalled and reinstalled Anydvd, CloneDVD and the dvd recorder a LG GSA-H55N. I just can’t get it to write to the media. I’m using quality +/- disks. It pickup my targeted dvd burner during installation.

What can I check for the fix?

 

[Webslinger]

click http://forum.slysoft.com/showthread.php?t=9914 and answer/do questions/items 2, 4, 5, 7, 8, and 9

 

[d18036a]

Anydvd 6.4.2.2 and Clonedvd 2.9.1.7

Anydvd is running.

There is no error message. Problem is the burner wont burn to the dvd.

Firmware version burner is up to date.

Not sure how to “Remove packet writing software from your system, including

Roxio's Directcd, Nero's Incd, Roxio/Sonic's DragtoDisc, Drive Letter Access, CyberLink InstantBurn, NTI's Filecd, etc.”

Not sure who burning application is running I thought Anydvd was it. State the specific version(s) of the burning application(s) you are using (and stating "latest versions" isn't sufficient information; use full version numbers), and b)the specific version(s) of whatever other burning application(s) you have installed on your system.

What blank media are you using? Memorex I have both +/- 16x,4.7gb, 120 min

At what speed are you burning your blank media? The default Max.

Click the red fox icon in your system tray. Select "status" on the left hand side of your screen.

Summary for drive F: (AnyDVD 6.4.2.2)
HL-DT-ST DVD-RAM GSA-H55N 1.05 07/12/11 7U02
Drive (Hardware) Region: 0 (not set!)

Media is a DVD.
Booktype: dvd-r (version 5), Layers: 1
Total size: 2289360 sectors (4471 MBytes)

Video DVD (or CD) label: RIO_BRAVO
Media is not CSS protected.
Video Standard: NTSC
Media is region free.

RCE protection not found.
Structural copy protection not found.
Autorun not found on Video DVD.
Bad sector protection not found.
Emulating RPC-2 drive with region 1!

 

[d18036a]

[15:39:43] DVD Identifier V5.0.1
[15:39:43] Initializing Drive Interface [Auto-Select ASPI/SPTI]
[15:39:43] SPTI Drive Interface Successfully Initialized
[15:39:43] 1 Supported Drive Found (Out Of 2 Available Drives)
[15:39:43] Manufacturer Database [08-OCT-06@727$93] Loaded From File : (@727$93) Entries Found
[15:39:51] This Version Of 'DVD Identifier' Is Up-To-Date
[15:39:51] The Manufacturer Database Is Up-To-Date
[15:39:56] DVD-R/-RW Medium Detected. Starting Identification...
[15:39:56] ** Initiating LPP Retrieval
[15:39:56] LPP Read Completed Without Errors
[15:39:57] Disc Identification Completed Successfully


** INFO : Drive = HL-DT-ST DVD-RAM GSA-H55N - [FW 1.05] - [ATAPI]
** INFO : Write Capabilities = DVD+R DVD+R-DL DVD+RW
** INFO : Write Capabilities = DVD-R DVD-R-DL DVD-RW DVD-RAM
** INFO : Disc = [DVD-R:CMC MAG. AM3]
** INFO : Reference Speed : 1x DVD = 1385 kBps
** INFO : An Writeable Disc Is Recommended For Accurate Results
** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below

** INFO : GET PERFORMANCE Write Speed Descriptor(s)
Descriptor #1 = 22160 kBps (16.00x) - [CLV/Non-Pure CAV]
Descriptor #2 = 16620 kBps (12.00x) - [CLV/Non-Pure CAV]
Descriptor #3 = 11080 kBps ( 8.00x) - [CLV/Non-Pure CAV]
Descriptor #4 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV]

** INFO : MODE SENSE Write Speed Descriptor(s) [Legacy Command]
** WARNING : MODE SENSE Is Obsolete And Not Always Properly Supported
Descriptor #3 = 22160 kBps (16.00x) - [CLV/Non-Pure CAV]
Descriptor #4 = 16620 kBps (12.00x) - [CLV/Non-Pure CAV]


** INFO : Hex Dump Of 'Media Code'-Block Listed Below
** INFO : 4-Byte Header Preceding 'Media Code'-Block Discarded
** INFO : Format 0Eh - Pre-Recorded Information In Lead-In
0000 : 01 40 c1 fd 9e d8 52 00 02 84 0d 12 98 99 90 00 .@....R.........
0010 : 03 43 4d 43 20 4d 41 00 04 47 2e 20 41 4d 33 00 .CMC MA..G. AM3.
0020 : 05 88 80 00 00 00 02 00 06 09 0d 14 98 88 90 00 ................
0030 : 07 88 80 00 00 00 00 00 08 07 17 0a 0e 09 04 00 ................
0040 : 09 95 07 0d 0b 88 88 00 0a 80 00 00 00 00 10 00 ................
0050 : 0b 06 17 15 b8 99 85 00 0c b8 9a 32 03 20 32 00 ...........2. 2.
0060 : 0d 00 00 d0 00 00 00 00 0e 09 1f 39 2f 25 1c 00 ...........9/%..
0070 : 0f 50 19 29 19 89 b5 00 10 88 84 00 04 00 04 00 .P.)............
0080 : 11 00 00 00 00 00 00 00 12 09 2b 37 2d 29 1b 00 ..........+7-)..
0090 : 13 50 1d 2d 1f a6 b5 00 14 88 80 00 00 00 00 00 .P.-............
00a0 : 15 00 00 00 00 00 00 00 16 0b 45 3d 3b 1f 25 00 ..........E=;.%.
00b0 : 17 30 25 31 0d 8a b5 00 18 88 80 00 00 00 00 00 .0%1............
00c0 : 19 00 00 00 00 00 00 00 1a 0c 51 51 51 45 2d 00 ..........QQQE-.
00d0 : 1b 90 23 2d 19 79 b5 00 1c 88 80 00 00 00 00 00 ..#-.y..........
00e0 : 1d 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00f0 : 00 00 00 00 00 00 ......

** INFO : Hex Dump Of 'Control Data Zone'-Block Listed Below
** INFO : 4-Byte Header Preceding 'CDZ'-Block Discarded
** INFO : Format 10h - Physical Format Information Of Control Data Zone
0000 : 25 0f 02 00 00 03 00 00 00 26 12 7f 00 00 00 00 %........&......

 

[Webslinger]

Follow the steps in the order they are listed:

Drive (Hardware) Region: 0 (not set!)

1. i. Right click the fox on your toolbar. Exit Anydvd
ii. Click start. Right click on "My computer"--->select "properties".
iii.Click on the 'Hardware' tab--->click the 'device manager' button.
iv. Open the dvd/cdrom branch---> right click on your optical drive
v. Click "properties".
vi. You should have a region tab. From there you can select a region.
vii. Select the region that you're in
viii. Start Anydvd

2.

Memorex I have both +/- 16x,4.7gb, 120 min

Junk. If you use junk, then you should expect problems.

Bad quality blank media can vary in results from disc to disc, even within the same spindle. With good blank media you can play "find the bad blank" game. With inferior quality blank media you get to play "find the blank that works" game. And even when inferior blank media does work, you can play the "will my backups still play after 6 months (or even after two years)" game.

Use good quality blank media (Taiyo Yuden Premium, Verbatim, Maxell Plus, Maxell Broadcast Quality). Avoid Ritek, Memorex, Regular Maxell blank media that you can find in most stores that are not made in Japan, Fuji, TDK from Costco, and Princo. Also, on average, it's wise to avoid blank media that's made in China or Hong Kong.

If you're using double layer blank media, use Verbatim +R DL (preferably made in Singapore) or MAM-A 8x +R DL.

3. Click this

Do what it says to do

4.

The default Max.

Don't

Burn at 8x or 12x

5. click http://forum.slysoft.com/showthread.php?t=476 and follow the steps (step by step)