kompatibility

Discussion in 'CloneDVD' started by Mork, Apr 10, 2007.

  1. Mork

    Mork New Member

    Hi,

    i tried clone DVD (tryout) but i had noticed, that the copy doesn run
    at several different players correctly. What can be wrong? I tried LG burner and different DVDs. (different brands, singel and fual Layer). I used a film with no copy protection!
    Thanks!

    regards B.S.
     
  2. Webslinger

    Webslinger Retired Moderator

    1. Update your burner's firmware (if available)
    http://forum.slysoft.com/showpost.php?p=12794&postcount=10
    2. Use good quality media
    visit http://www.redflagdeals.com/forums/showpost.php?p=4764653&postcount=25
    and
    http://www.redflagdeals.com/forums/showthread.php?p=3976250
    3. Try lowering your burn speed (not below 4x; if you have a 16x burner and 16x rated media try writing to it at 12x instead of 16x)
    4. If you're using +R, +RW, or +R DL media, change the booktype to "dvd-rom"
    http://forum.slysoft.com/showthread.php?t=476 (step 3)
    5. Avoid sticker labels (they tend to cause problems)
    6. Try setting a custom size of 4300 in Clonedvd (but if you're using good media, you shouldn't have to)


    Bad burn quality is notorious around the end of discs
    and also at layer breaks when using low quality DL media (use Verbatim +R DL media, and change the booktype to "dvd-rom)


    Also, check the preview screen in Clonedvd to ensure you're backing up the proper title.


    read http://forum.slysoft.com/showthread.php?t=476 fully please