I've got the same problem going on

Discussion in 'CloneDVD' started by atsmob, Feb 21, 2008.

  1. atsmob

    atsmob Member

    I figured I would try the instructions posted here to see if I can get some help. I've been using Clone DVD for over a year now and this is the first time I've had any trouble. It crashes as soon as it gets to the writing to disc phase. Thanks.
     

    Attached Files:

  2. Webslinger

    Webslinger Retired Moderator

    Please do not post in other people's troubleshooting threads unless you wish to assist them. click http://forum.slysoft.com/showpost.php?p=87585&postcount=4 and read fully
    Thank you



    You do have some packet writing software, Sonic Solutions' Drive Letter Access, on your system, which can cause conflicts with Clonedvd, Anydvd, and other programs. If you need to drag and drop files to burn (as you would to a floppy disc), then use dvd-ram instead (and I suggest using a FAT file system with dvd-ram), which is more stable.


    Check http://www.siliconimage.com/support/ for an updated driver for your satalink device (whatever that might be . . . check device manager, maybe).

    If you don't have a satalink device on your computer (you probably do though, so think twice about removing this filter), then remove that filter:

    i) Create a backup of your registry
    ii) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)
    iii) Go to Tools > Filter Driver Load Order. Select "SiRemFil." Click "Remove Selected Filter". Click "ok".
    iv) Reboot


    Follow these steps in the order they are listed:


    1.
    i) Create a backup of your registry
    ii) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)
    iii) Go to Tools > Filter Driver Load Order. Select "DRVMCDB". Click "Remove Selected Filter". Select "DLACDBHM". Click "Remove Selected Filter". Click "ok".
    iv) Reboot

    Keep in mind the program(s) that installed those filters will no longer work properly.

    2. Are you using Clonedvd 2.9.1.5? If not, then update.

    3. What blank media are you using? Specify a) brand name b)type (-R, +R, -RW, +RW, RAM, DL, etc.) c)media code, d) capacity/size, e) batch codes/serial codes (often found printed on the inner plastic hub of the blank disc), and f)country (factory information would be great as well, if possible) where the media was made (look on the physical packaging; do not rely on programs to accurately give you this information).

    If you don't know how to obtain media codes, you may find the following programs useful:

    http://dvd.identifier.cdfreaks.com and http://www.dvdinfopro.com/
     
    Last edited: Feb 22, 2008
  3. atsmob

    atsmob Member

    Thank you for your help. I will try your suggestions as soon as I can.

    Also, I will follow the rules of the forum more closely. It makes sense not to post in other people’s threads I just didn’t think about it before.