1. AnyStream is having some DRM issues currently, download with Netflix and Hulu is not possible at the moment.
    Situations like this will always happen with AnyStream: streaming providers are continuously improving their countermeasures while we try to catch up, it's an ongoing cat-and-mouse game. Please be patient and don't flood our support or forum with requests, we are working on it 24/7 to get it resolved - but it will take a few days. Thank you.

Invisible

Discussion in 'CloneDVD' started by cricketcf1217, Oct 16, 2007.

  1. cricketcf1217

    cricketcf1217 Active Member

    Once I start CloneDVD, it gets about 50% done reading and then says bad media. CloneDVD 2.9.1.2 and AnyDVD 6.1.8.4 have also tried AnyDVD 6.1.7.4

    Any suggestions
     
  2. Webslinger

    Webslinger Retired Moderator

    Answer questions 8, 9, and especially 10 from this link:
    click http://forum.slysoft.com/showthread.php?t=393
     
  3. cricketcf1217

    cricketcf1217 Active Member

    I have fixed the issue for the moment by going back to an older version of clonedvd and anydvd and my backup worked fine

    I will have to answer the questions above once I get back from work, as I work a 12 hour shift.
     
  4. cricketcf1217

    cricketcf1217 Active Member

    I used clonedvd 2.9.1.2 and anydvd 6.1.7.0 and my back up works fine. I found I had to go back to an older version of anydvd.
     
  5. Webslinger

    Webslinger Retired Moderator

    You need to do with this with Anydvd 6.1.8.4, and I need a full error message from Clonedvd please.

    a)Click the red fox icon on your toolbar.
    b) Navigate to "Program Settings".
    c) Click "enable logging".
    d) Click "ok".
    e) Put the problematic disc in your optical drive/reader.
    f) Go to your My Documents folder
    g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"
     
  6. cricketcf1217

    cricketcf1217 Active Member

    step 8 - original disc/ not able to make back up with this info

    Summary for drive G: (AnyDVD 6.1.8.4)
    HL-DT-ST DVD-RAM GSA-H22N 1.01 06/09/21
    Drive (Hardware) Region: 0 (not set!)

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 2081632 sectors (4065 MBytes)
    Total size: 4062246 sectors (7934 MBytes)

    Video DVD (or CD) label: INU0NNW1
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1 4!

    RCE protection not found.
    Found & removed structural copy protection!
    Found & removed invalid cell pieces!
    Found & removed bogus title set(s)!
    UDF filesystem patched!
    Autorun not found on Video DVD.
    Found & removed 8 potential bad sector protections!
    Emulating RPC-2 drive with region 1!
     
  7. shannon90210

    shannon90210 Well-Known Member

    fwiw ....

    I'm not having any trouble with "The Invisible" R1/US
    AnyDVD 6.1.8.4 and CloneDVD2 2.9.1.2
    Deselected Previews/Warnings

    Everything backed-up fine
    -- No Error Messages at all

    I did have the AI Scanner set @ "Deep Scan' though

    I'm running the Full Disc again to confirm ( nothing Removed )



    Summary for drive F: (AnyDVD 6.1.8.4)
    MAD DOG MD-16X3DVD9-8X 1.F3 06101900
    Drive (Hardware) Region: 1

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 2081632 sectors (4065 MBytes)
    Total size: 4062246 sectors (7934 MBytes)

    Video DVD (or CD) label: INU0NNW1
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1 4!

    RCE protection not found.
    Found & removed structural copy protection!
    Found & removed invalid cell pieces!
    Found & removed bogus title set(s)!
    UDF filesystem patched!

    Autorun not found on Video DVD.
    Found & removed 8 potential bad sector protections!
    Emulating RPC-2 drive with region 1!



    ;)
     
  8. cricketcf1217

    cricketcf1217 Active Member

    I am redoing the run to get the error message to come back up, so it will be a little while.
     
  9. Webslinger

    Webslinger Retired Moderator

    That shouldn't matter. James has stated that if a disc requires "deep scan", there is a serious bug with the A.I. scanner (actually, now that I pause and think I believe there may be a bug with the A.I. scanner, but I don't believe selecting "deep scan" resolves it).
     
  10. Webslinger

    Webslinger Retired Moderator

    I would really appreciate if you did this when you get the chance (with 6.1.8.4):

    a)Click the red fox icon on your toolbar.
    b) Navigate to "Program Settings".
    c) Click "enable logging".
    d) Click "ok".
    e) Put the problematic disc in your optical drive/reader.
    f) Go to your My Documents folder
    g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"
     
  11. cricketcf1217

    cricketcf1217 Active Member

    step 10 - original disc

    As soon as I get the error message I will post it. I am using clonedvd 2.9.1.2 and anydvd 6.1.8.4
     

    Attached Files:

  12. shannon90210

    shannon90210 Well-Known Member

    You need to set your DVD Drives Region to Region 1
    ( or whatever Region most of your DVDs originate )


    :)
     
  13. Webslinger

    Webslinger Retired Moderator


    1. Uninstall Musicmatch.

    2. Ensure MXLW2k no longer appears in your filters.
    a) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)

    b) Go to Tools > Filter Driver Load Order. Check

    3. i. Right click the fox on your toolbar. Exit Anydvd
    ii. Click start. Right click on "My computer"--->select "properties".
    iii.Click on the 'Hardware' tab--->click the 'device manager' button.
    iv. Open the dvd/cdrom branch---> right click on your optical drive
    v. Click "properties".
    vi. You should have a region tab. From there you can select a region.
    vii. Select the region that matches the region on the disc
    viii. Start Anydvd
    ix. click the fox icon on your toolbar. Go to Video dvd--->settings
    x. Change the default to match the region on the disc
    xi. Click Ok
     
    Last edited: Oct 18, 2007
  14. shannon90210

    shannon90210 Well-Known Member

    I've been reading ..... So I've just been testing it

    ..... out of curiosity

    Seems to be working fine for me ..... so far

    .... anyway

    I backed-up "The Invisible" > Full disc/ nothing Deselected

    No Problem
    No Problems at all
    scanned through at 32x ... the result seems fine

    Maybe a Bad Source Disc ?
    ... or other troubles ( ? )

    ;)
     
  15. Webslinger

    Webslinger Retired Moderator

    Possibly, yes . . .

    Now I would just like the full Clonedvd error message.
     
  16. Webslinger

    Webslinger Retired Moderator

    Yes.


    @cricketcf1217
    Just for reference, that's step 3 in what I posted earlier.
     
  17. cricketcf1217

    cricketcf1217 Active Member

    Here is the message I got in Clonedvd

    Processing error
    G:/Video_TS/VTS_04_3.VOB: read error

    Incorrect function



    This is what is under the details tab
    File 1 G:/VIDEO_TS/VTS_04_3.VOB 1 TCSectorReader
     
  18. Webslinger

    Webslinger Retired Moderator

    Yeah, so make this step 4:

    4. Download Nero cd-dvd speed. It's a free program. With Anydvd running in the background, select the tab labeled "scandisc". Select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your disc is (probably) bad and needs to be exchanged--even if it plays fine (or your optical drive could be slowly dying).
     
  19. cricketcf1217

    cricketcf1217 Active Member

    Now, why do I have to uninstall musicmatch and install imageburn. I have never had to do this before and I have purchased these programs about 3 years ago. Makes no since why I would need to do that after all this time.
     
  20. Webslinger

    Webslinger Retired Moderator

    Possible (known) conflict with Clonedvd

    Simply to check filters easily . . .

    That said, I'm leaning towards a bad original disc here (but steps 3 and 4 should be done, regardless).