Incorrect parameter

Discussion in 'CloneDVD' started by jayl316, Jan 12, 2008.

  1. jayl316

    jayl316 New Member

    When my clone dvd2 is creating dvd files at about 97 percent it says processing error the parameter is incorrect, please clean the surface and try again. I have tried cleaning it but it still won't work, what can i do to fix it?
     
  2. Webslinger

    Webslinger Retired Moderator

    1. Use Anydvd 6.3.0.8 beta: click http://forum.slysoft.com/showpost.php?p=80022&postcount=1
    You may need to reboot after installing if prompted to do so.

    2. Click the red fox icon on your toolbar. Click "default". Click "ok".
    Also please ensure the A.I. scanner is set to default (click red fox icon-->navigate to "video dvd"-->"settings"-->"Automatic (default)")
    And disable logging under "program settings").

    3. Use Clonedvd 2.9.1.2: click http://static.slysoft.com/SetupCloneDVD.exe

    4. a)Click the red fox icon on your toolbar.
    b) Navigate to "Program Settings".
    c) Click "enable logging".
    d) Click "ok".
    e) Put the problematic original disc in your optical drive/reader.
    f) Go to your My Documents folder
    g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"

    5. Download Nero cd-dvd speed. It's a free program. With Anydvd running in the background, select the tab labeled "scandisc". Select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your disc is (probably) bad and needs to be exchanged--even if it plays fine (or your optical drive could be slowly dying).
     
    Last edited: Jan 12, 2008
  3. jayl316

    jayl316 New Member

    how do i use nero cd-dvd

    never used this program before how to i use it to burn my dvd files.
     
  4. Webslinger

    Webslinger Retired Moderator

    Follow these steps in order please (and pay close attention to step 4 and step 6). It's important that you update Anydvd and Clonedvd.


    1. Use Anydvd 6.3.0.9 beta: click http://sandbox.slysoft.com/beta/SetupAnyDVD6309.exe

    You may need to reboot after installing if prompted to do so.

    2. Click the red fox icon on your toolbar. Click "default". Click "ok".

    3. Use the latest Clonedvd beta: click
    http://forum.slysoft.com/showpost.php?p=81170&postcount=1

    4. Follow the steps from this link in order: click http://forum.slysoft.com/showthread.php?t=476 (follow them step by step)

    5. If you still have problems, then . . .

    A) a) Ensure Anydvd is running.
    b) Put the problematic original disc in your optical drive/reader. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload"


    B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?

    6. Download Nero cd-dvd speed. It's a free program. With Anydvd running in the background, select the tab labeled "scandisc". Select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your disc is (probably) bad and needs to be exchanged--even if it plays fine (or your optical drive could be slowly dying).
     
    Last edited: Jan 15, 2008