I'm having problems

Discussion in 'CloneDVD' started by memnv, Nov 14, 2007.

  1. memnv

    memnv Member

    I have been using the slysoft products for over a year and a half never having troubles and for the last 3 or 4 weeks I have had every new movie fail for me. Is there going to be a clonedvd2 update anytime soon, all my movies fail when they get in the 93-97 percent range
     
  2. Webslinger

    Webslinger Retired Moderator

    Even if there were, it wouldn't fix your problem as the vast majority are not experiencing this issue.

    When you say "fail", what happens exactly? 93% while burning? Or while reading?

    1)State the full a)error message(s) you encountered, b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s).

    2) a)Click the red fox icon on your toolbar.
    b) Navigate to "Program Settings".
    c) Click "enable logging".
    d) Click "ok".
    e) Put the problematic disc in your optical drive/reader.
    f) Go to your My Documents folder
    g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"
     
  3. memnv

    memnv Member

    I am having the problems with CloneDVD2,the same movies copy using dvdfab

    heres the zip file
     

    Attached Files:

  4. Webslinger

    Webslinger Retired Moderator

    I need a full error message.

    Bad stuff. Uninstall Sonic's Drag-to-Disc packet writing software. It causes conflicts with a lot of programs including Slysoft's.
    Ensure the two filters I quoted are no longer listed.



    If you can't figure out how to uninstall Drag to Disc (the filters need to be removed), do this:


    i) Create a backup of your registry
    ii) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)
    iii) Go to Tools > Filter Driver Load Order. Select "Cdralw2k". Click "Remove Selected Filter". Select "Cdr4_xp". Click "Remove Selected Filter". Click "ok".
    iv) Reboot

    Keep in mind whatever installed those filters will no longer work properly.
     
    Last edited: Nov 14, 2007
  5. Webslinger

    Webslinger Retired Moderator

  6. Coaster

    Coaster Well-Known Member

    @ memnv,

    Suggest closely review Forum Member Webslinger #2 posting and provide the requested in formation ->

    Regards,
    Coaster
     
  7. memnv

    memnv Member

    I am still having problems and I did what you said
     

    Attached Files:

  8. Webslinger

    Webslinger Retired Moderator

    You're still not providing the requested information.

    When you say "fail", what happens exactly? 93% while burning? Or while reading?

    State the full a)error message(s) you encountered, b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?
     
  9. memnv

    memnv Member

    The problems are during reading, using AnyDvd and Clonedvd2, I will have to retry to get the error message again
     
  10. Webslinger

    Webslinger Retired Moderator

    Please provide them. Otherwise, we have no idea what problem it is that you're having.



    There's no protection on this disc (other than CSS, which is on most discs by default), which means practically anything can handle this disc.

    That said, download Nero cd-dvd speed. It's a free program. With Anydvd running in the background, select the tab labeled "scandisc". Select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your disc is (probably) bad and needs to be exchanged--even if it plays fine (or your optical drive could be slowly dying).
     
  11. memnv

    memnv Member

    The only error it gives me is Unexpected Error dosnt explain and it does this on all my dvds,when I use other programs like dvdfab it seems to copy fine, but I want this one fixed because I paid for keys here and dont want to pay again
     
  12. memnv

    memnv Member

    I ran the Nero cd-dvd speed and the surface came up 100% good
     
  13. Webslinger

    Webslinger Retired Moderator

    That's not the full error message. When you click "details", what does it say? That's the information that's required.

    You should also note that dvdfab skips past read errors in some cases. In that event, you do not have a perfect backup; some cells will be missing (you may not notice them, but they will be missing). If the read error it's skipping over is large enough, then you will notice material missing.

    Clonedvd does not skip over read errors.
     
    Last edited: Dec 8, 2007
  14. memnv

    memnv Member

    gonna run clonedvd2 again
    and I will see what details says
     
  15. Webslinger

    Webslinger Retired Moderator

    O.k., well, I have to go out soon. I ran out of printer paper and envelopes. I may check back sometime this evening. Maybe someone else will be able to help you while I'm out. If not, I should be back sometime this evening.
     
  16. memnv

    memnv Member

    ok, thanks for the help and hopefully the problem can get nipped, im gonna run out in a few to see Golden Compass
     
  17. memnv

    memnv Member

    ok the error is :

    Clone 1 TCE
     
  18. Webslinger

    Webslinger Retired Moderator

    Hmm . . .

    Clone 1 TCE usually has to do with a problem involving the bitrate controller or that Clonedvd cannot compress properly due to the disc not being decrypted properly. Anydvd is running in the background right when you insert the disc?

    1) Do you see "remuxing forced" messages in the log?

    2) Is your CSS key archive disabled in Anydvd? If not, it should be.

    3) I'm sorry to ask, but you're not using a cracked version of Anydvd, right?

    4) Watch the movie with Anydvd running in the background. Is the picture messed up or distorted?

    Anyway, I have to go out now. I'll be back later.
     
  19. memnv

    memnv Member

    Anydvd is running in the background when I run them, I have not seen a remuxing forced message, the CSS archive was not disabled so I am trying that, what do you mean cracked version, I get my versions from here same place I bought my keys. I am trying it with the archives off and then I will try playing a movie with anydvd running in the background

    Thank You, I hope the archive thing is the problem
     
  20. memnv

    memnv Member

    still didnt work, im gonna try watching a movie the way you said