How to use the .sub file (in CloneCD)?

Discussion in 'CloneCD' started by Kate, Jul 22, 2007.

  1. Kate

    Kate New Member

    Hallo. How to use a .sub file that came with CDimage (ccd, cue, img) while burning this CD image on CD, using CloneCD of course?
    I got CloneCD trial v. It can burn cdimage without problam, but the .sub file is left unused, and CD is not complete.
  2. zebadee

    zebadee Well-Known Member

    Hi :)
    Welcome onboard Kate. :agree::clap:
    You may have a problem in that the drive you use does not transfer this information.
    As far as CloneCD goes you need to enable the subchannels & amplify the weak sectors etc.
    So post back with more info (i.e. what drive you are using).
  3. Kate

    Kate New Member

    Thnx for response!
    That's what CloneCD says about my drive:

    Device Capabilities:
    Note: This information is provided by the unit, it might be inaccurate. CloneCD does not use this information!
    Manufacturer: LITE-ON
    Product: COMBO LTC-48161H
    Revision: KH0M
    Can read CD-R Discs: Yes
    Can read CD-RW Discs: Yes
    Can read DVD Discs: Yes
    Can read MultiSession Discs: Yes
    Can read Digital Audio Discs: Yes
    Digital Audio Data is accurate: Yes
    Can write CD-R Discs: Yes
    Can write CD-RW Discs: Yes
    Compatible with CloneCD RAW-DAO: Yes
    Compatible with CloneCD RAW-DAO Write Simulation: Yes
    Supports writing of CD+G RAW-DAO: Yes
    Compatible with CloneCD RAW-SAO: Yes
    Compatible with CloneCD RAW-SAO Write Simulation: Yes
    Supports Buffer Underrun Protection: Yes

    Ive got allowed "Amplify weak sectors" and allowed reading of subchannels.