help

Discussion in 'AnyDVD HD (DVD issues)' started by jjwljo7, Nov 8, 2007.

  1. jjwljo7

    jjwljo7 New Member

    hi, I have been having trouble copying dvd's it used to take about25 min and now it is taking 1.5 hrs. I downloaded the clone and any again and it still is taking way to long. can anyone help with this problem
    Thanks
     
  2. Webslinger

    Webslinger Retired Moderator

    from Frequently Asked Questions (READ BEFORE YOU POST)

    13. My burns are taking forever to complete suddenly. Why?

    a) Is DMA enabled for your drives in
    i) Windows XP?
    ii) Windows Vista?
    iii) general?

    b) Is the original source disc bad? If so, the reading process will take longer.
    Download Nero cd-dvd speed. It's a free program. Select the tab labeled "scandisc". Select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your disc is bad and needs to be exchanged--even if it plays fine (or your optical drive could be slowly dying).

    c) Did you select an appropriate burn speed in whatever program you're using? Obviously 4x is going to take longer than 12x.

    d) Try another cable on the back of your burner (try an 80 wire cable if you have an ide burner). Maybe your existing cable has gone bad.

    e) Try defragmenting your hard drive.

    f)) Ensure speed control is unchecked in Anydvd (or at least, ensure "Slow and Quiet" is not enabled).

    g) Click http://forum.slysoft.com/showpost.php?p=63749&postcount=12 to see what TBPirate did to resolve his problem.
     
  3. jjwljo7

    jjwljo7 New Member

    :confused:
     
  4. oldjoe

    oldjoe Well-Known Member

    Your PC has most likely reverted to PIO Mode. It's not uncommon and it's an easy fix. Click on i for XP and ii for Vista.