Help - Copy Protection Error

Discussion in 'AnyDVD HD (DVD issues)' started by redbirds06, Sep 6, 2007.

  1. redbirds06

    redbirds06 Member

    My DVD burner recently took a dump on me and I went and bought a HP dvd1040 USB external burner. I have had no problems burning DVD's before, but now I am. I put the DVD in the new drive and it loads in anydvd. I then go to DVD Shrink and open the disc in that. It opens and runs it's analysis. It is then ready to go. I hit the backup button and select where I want to save it and I get the following error:

    Failed to read file D://
    Copy Protection Error - The Read failed because the sector is encrypted.

    Please help. What am I doing wrong now that I have this new external drive.
    Thanks
     
  2. Webslinger

    Webslinger Retired Moderator

  3. redbirds06

    redbirds06 Member

    Summary for drive D: (AnyDVD 6.1.7.0)
    HP DVD WRITER 1040D EH23 2007/02/02
    Drive (Hardware) Region: 0 (not set!)

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 1
    Total size: 2196256 sectors (4289 MBytes)

    Video DVD (or CD) label: DVD_VIDEO
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1!

    RCE protection not found.
    DVD structure appears to be correct.
    Structural copy protection not found.
    Autorun not found on Video DVD.
    Bad sector protection not found.
    Emulating RPC-2 drive with region 1!
     
  4. Charlie

    Charlie Well-Known Member

    Turn off AnyDVD then put the DVD into your drive so the region can be set properly. You can do this by letting the dvd play a little bit. Then removed the DVD reboot and turn back on AnyDVD.
     
  5. Webslinger

    Webslinger Retired Moderator

    Or . . .

    i. Right click the fox on your toolbar. Exit Anydvd
    ii. Click start. Right click on "My computer"--->select "properties".
    iii.Click on the 'Hardware' tab--->click the 'device manager' button.
    iv. Open the dvd/cdrom branch---> right click on your optical drive
    v. Click "properties".
    vi. You should have a region tab. From there you can select a region.
    vii. Select the region that matches the region on the disc
    viii. Start Anydvd
    ix. click the fox icon on your toolbar. Go to Video dvd--->settings
    x. Change the default to match the region on the disc
    xi. Click Ok
     
  6. Webslinger

    Webslinger Retired Moderator

  7. redbirds06

    redbirds06 Member

    I have now done all of those steps and I still get the same message. Any ideas on what I should do next.

    Summary for drive D: (AnyDVD 6.1.7.1)
    HP DVD WRITER 1040D EH23 2007/02/02
    Drive (Hardware) Region: 1

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 1
    Total size: 2196256 sectors (4289 MBytes)

    Video DVD (or CD) label: DVD_VIDEO
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1!

    RCE protection not found.
    DVD structure appears to be correct.
    Structural copy protection not found.
    Autorun not found on Video DVD.
    Bad sector protection not found.
    Emulating RPC-2 drive with region 1!
     
  8. Webslinger

    Webslinger Retired Moderator



    This is a movie? What's the title?
     
  9. redbirds06

    redbirds06 Member

    Booty Call. I have also had no luck and same error message with every movie that I have tried. I'm not sure what I'm doing wrong here.
     
  10. Webslinger

    Webslinger Retired Moderator

    1. Anyway, you did ensure "burn with nero" was disabled in Shrink, right?

    2. Click the red fox icon on your toolbar. Click the "default" button. Click "ok". Try again.

    3. Click the red fox icon on your toolbar. Go to "Program Settings". Click "safe mode". Try again.

    4.
    a) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)

    b) Go to Tools > Filter Driver Load Order. Click "Clipboard". Then paste the information you pasted into your clipboard into your next post (ctrl-v).
     
    Last edited: Sep 6, 2007
  11. redbirds06

    redbirds06 Member

    I ensured that it was disabled and I rebooted it. I then did step 2 and selected the default button. It is now working. I also did step 3 and and step 4. I pasted the information below. One thing I do notice now is that I don't have the option to select the drive as a backup file once the Nero has been disabled. I'm guessing this means I can't backup straight to a blank disc once it is done reading it. Is there anyone to fix this or should I use a different program such as Clone DVD or the ImgBurn? Thanks for all of your help. I hope it continues to work.

    ===============================================
    Filter Driver Load Order - ImgBurn v2.3.2.0
    ===============================================

    Upper Device Filter: redbook
    Upper Class Filter: GEARAspiWDM
    Device: CD/DVD-ROM Device
    Lower Class Filter: ElbyDelay
    Lower Class Filter: PxHelp20
    Lower Class Filter: AnyDVD
    Lower Device Filter: imapi

    Filter Name: redbook
    File Name: C:\WINDOWS\system32\DRIVERS\redbook.sys
    File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
    File Description: Redbook Audio Filter Driver
    Product Name: Microsoft® Windows® Operating System
    Product Version: 5.1.2600.2180
    Company Name: Microsoft Corporation
    Copyright: © Microsoft Corporation. All rights reserved.

    Filter Name: GEARAspiWDM
    File Name: C:\WINDOWS\System32\Drivers\GEARAspiWDM.sys
    File Version: 2.0.6.1
    File Description: CD/DVD Class Filter Driver
    Product Name: GEAR.wrks
    Product Version: 8.xx [2.0.6.1]
    Company Name: GEAR Software Inc.
    Copyright: Copyright (c) GEAR Software Inc. 2006

    Filter Name: ElbyDelay
    File Name: C:\WINDOWS\System32\Drivers\ElbyDelay.sys
    File Version: 5, 1, 0, 0 [5.1.0.0]
    File Description: Elby Delay Lower Filter Driver
    Product Name: CDRTools
    Product Version: 5, 1, 0, 0 [5.1.0.0]
    Company Name: Elaborate Bytes AG
    Copyright: Copyright (C) 2003, 2005 Elaborate Bytes AG

    Filter Name: PxHelp20
    File Name: C:\WINDOWS\System32\Drivers\PxHelp20.sys
    File Version: 3.00.43J [3.0.43.9]
    File Description: Px Engine Device Driver for Windows 2000/XP
    Product Name: PxHelp20
    Product Version: [2.0.0.0]
    Company Name: Sonic Solutions
    Copyright: Copyright © Sonic Solutions

    Filter Name: AnyDVD
    File Name: C:\WINDOWS\System32\Drivers\AnyDVD.sys
    File Version: 6.1.7.1
    File Description: AnyDVD Filter Driver
    Product Name: AnyDVD
    Product Version: 6.1.7.1
    Company Name: SlySoft, Inc.
    Copyright: Copyright 2002 - 2007 SlySoft, Inc.

    Filter Name: imapi
    File Name: C:\WINDOWS\system32\DRIVERS\imapi.sys
    File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
    File Description: IMAPI Kernel Driver
    Product Name: Microsoft® Windows® Operating System
    Product Version: 5.1.2600.2180
    Company Name: Microsoft Corporation
    Copyright: © Microsoft Corporation. All rights reserved.
     
  12. Webslinger

    Webslinger Retired Moderator

    Your filters look fine.

    So do this now.

    1. Update to Anydvd 6.1.7.2. click http://forum.slysoft.com/showthread.php?t=7502

    2. Click the red fox icon on your toolbar. Click the "default" button. Click "ok". (You don't appear to need "safe mode".)

    3. Enable "burn with nero" in Shrink.

    4. Try again.

    If you find you have issues with "burn with nero" enabled, then leave it disabled.
     
    Last edited: Sep 6, 2007