Having Problems with DVD Clone & Pixelation

Discussion in 'CloneDVD' started by zapper, Oct 21, 2007.

  1. zapper

    zapper Well-Known Member

    Hi, having problems copying with DVD Clone over half watching the movie it starts showing Pixelation and little by little the movie freezzes.

    Using verbatim +R, this has happened more then once using Clone DVD, my Pc is using Vista 32. Any help that you can give me our advice would be greatly appreciated, this is getting old on reburning etc.

    BLANK MEDIA:

    Region information N/A not a DVD-VIDEO
    Media code/Manufacturer ID MCC 004
    Media Product Revision Number 00h
    Format Capacity Blank Disc
    Free Blocks 405405696
    Free Capacity 4.38GB(4.70GB)
    Book Type DVD+R
    Media Type DVD+R
    Manufacturer Rated Speed 16.0x 22160KBp
    Available Write Descriptor CLV 16.0x 22160KBps
    Available Write Descriptor CLV 12.0x 16620KBps
    Available Write Descriptor CLV 8.0x 11080KBps
    Available Write Descriptor CLV 6.0x 8310KBps
    Available Write Descriptor CLV 4.0x 5540KBps
    Data area starting sector 30000h
    Linear Density 0.267um/bit
    Track Density 0.74um/track
    Number of Layers 1

    Complete Media Code
    00000000 08 02 00 00 A1 0F 02 00 00 03 00 00 00 26 05 3F .............&.?
    00000010 00 00 00 00 00 00 07 4D 43 43 00 00 00 00 00 30 .......MCC.....0
    00000020 30 34 00 38 23 54 37 12 02 54 6C 02 92 5F 15 15 04.8#T7..Tl.._..
    00000030 0B 0B 08 08 01 19 1B 0C 0C 0C 0D 01 00 00 00 00 ................

    BURNED MEDIA:

    Media Information
    Disc Regions are 1,2,3,4,5,6,7,8
    Media code/Manufacturer ID MCC 004
    Media Product Revision Number 00h
    Format Type UDF 1.02
    Volume Name THE_ULTIMATE_GIFT
    Application id ELBY CLONEDVD
    Implementation id ELABORATE BYTES
    Recording Date/Time (mm/dd/yyyy) 10/20/2007 19:05:34
    Format Capacity 4.36GB(4.68GB)
    Book Type DVD-ROM
    Media Type DVD+R
    Manufacturer Rated Speed 16.0x 22160KBp
    Data area starting sector 30000h
    Data area end sector 22E7CFh
    Linear Density 0.267um/bit
    Track Density 0.74um/track
    Number of Layers 1

    Complete Media Code
    00000000 08 02 00 00 01 0F 02 00 00 03 00 00 00 25 E7 CF .............%..
    00000010 00 00 00 00 00 00 07 4D 43 43 00 00 00 00 00 30 .......MCC.....0
    00000020 30 34 00 38 23 54 00 00 00 00 00 00 00 00 00 00 04.8#T..........
    00000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
     
  2. Webslinger

    Webslinger Retired Moderator

    from Frequently Asked Questions (READ BEFORE YOU POST)

    6. Why are my backups freezing, hanging, skipping, or showing a blocky pixellated mess during playback?

    1. Update your burner's firmware (if available)
    http://forum.slysoft.com/showpost.php?p=12794&postcount=10

    2. Use good quality media (Memorex, Ritek, Princo, Fuji, TDK from Costco, and Maxell that are not made in Japan are not good quality media). Are you using inferior blank media? If you're not using Taiyo Yuden Premium, Verbatim, Maxell Plus, or Maxell Broadcast Quality, then chances are the answer is yes.
    If you use poor quality blank media, then you should expect problems.

    visit http://www.redflagdeals.com/forums/showpost.php?p=4764653&postcount=25
    and
    http://www.redflagdeals.com/forums/showthread.php?p=3976250

    3. Try lowering your burn speed (not below 4x; if you have a 16x burner and 16x rated media try writing to it at 12x instead of 16x; an 8x burn speed on 16x rated media wouldn't be a bad idea either)

    4. If you're using +R, +RW, or +R DL media, change the booktype to "dvd-rom"
    http://forum.slysoft.com/showthread.php?t=476 (step 3)

    5. Avoid sticker labels (they tend to cause problems)

    6. Try setting a custom size of 4300 in Clonedvd (but if you're using good media, you shouldn't have to) if you're using regular single layer dvd-5 (4.7GB) discs.

    7. Download Nero cd-dvd speed. It's a free program. Select the tab labeled "scandisc". Insert the problematic backup disc, select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your backup is bad (which is the most likely case), your optical drive may be slowly dying, or your optical drive simply doesn't like the disc (or your choice of blank media)--even if the disc looks fine.


    Bad burn quality is notorious around the end of discs (see step 6)
    and also at layer breaks when using low quality DL media (use Verbatim +R DL media made in Singapore, and change the booktype to "dvd-rom")


    Also, check the preview screen in Clonedvd to ensure you're backing up the proper title.


    read http://forum.slysoft.com/showthread.php?t=476 fully please