Having problem with ripping WRONG TURN

Discussion in 'AnyDVD HD (DVD issues)' started by jurio, Feb 3, 2008.

  1. jurio

    jurio New Member

    Hi, could someone help me? I have problem with ripping Wrong Turn...in 95% any dvd shows error: file IO 3...

    and my second and bigger problem is...when i have ripped some movie in any dvd and burned in clone dvd 2, its burned with some bad sector (or something) in the beginnig of the movie, because movie (both in PC and DVD player) begins with 5 seconds pause, then is heard some sound from the beginning of the movie, then is the next 5 seconds pause and after then the movie starts...

    Ill be so grateful if someone would help me... :confused::(
     

    Attached Files:

  2. Webslinger

    Webslinger Retired Moderator

    1. File IO3 typically means you have a bad original disc that needs to be exchanged (even if it plays fine), unless your drive is slowly dying.
    from Frequently Asked Questions (READ BEFORE YOU POST)
    Why am I getting FileIO 3, CRC, TCSectorReader, or read errors in general when the program I use tries to read a disc? (click the text to find out)

    2. You provided the .zip file for your backup. Provide the .zip file with the original disc. But first, update to Anydvd 6.3.1.4 beta: click http://sandbox.slysoft.com/beta/SetupAnyDVD6314.exe

    from Frequently Asked Questions (READ BEFORE YOU POST)


    3. Why are my backups freezing, skipping, or showing a blocky pixellated mess during playback? (click the text to find out)

    A. Update your burner's firmware (if available)
    http://forum.slysoft.com/showpost.php?p=12794&postcount=10

    B. Use good quality media (Memorex, Ritek, Princo, Fuji, TDK from Costco, and Maxell that are not made in Japan are not good quality media). Are you using inferior blank media? If you're not using Taiyo Yuden (not Valueline), Verbatim, Maxell Plus, or Maxell Broadcast Quality, then chances are the answer is yes.
    If you use poor quality blank media, then you should expect problems.



    C. Try lowering your burn speed a little (if you have a 16x burner and 16x rated media try writing to it at 12x or 8x instead of 16x)

    D. If you're using +R, +RW, or +R DL media, change the booktype to "dvd-rom"
    http://forum.slysoft.com/showthread.php?t=476 (step 3)

    E. Avoid sticker labels (they tend to cause problems)

    F. Try setting a custom size of 4300 in whatever burning program you're using (but if you're using good media, you shouldn't have to) if you're using regular single layer dvd-5 (4.7GB) discs.

    G. Download Nero cd-dvd speed. It's a free program. Select the tab labeled "scandisc". Insert the problematic backup disc, select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your backup is bad (which is the most likely case), your optical drive may be slowly dying, or your optical drive simply doesn't like the disc (or your choice of blank media)--even if the disc looks fine.

    Bad burn quality is notorious around the end of discs (see step 6)
    and also at layer breaks when using low quality DL media (use Verbatim +R DL media made in Singapore or MAM-A 8x +R DL, and change the booktype to "dvd-rom")
     
    Last edited: Feb 4, 2008
  3. jurio

    jurio New Member

    first id like to thank you, webslinger for your help...but...
    i have already updated burners firmware (TEAC DV-W512G, firmware T4S9), im using dvd-r memorex, im writing to media at 4x, im using any dvd and clone dvd 2...and dont know wheres problem with bad beginnig of the movie...
    a i havent had any problems till ive been using anydvd without hd support...
    when any dvd hd came out, and i installed it on my pc, the problem shows...
    i really need a right solution of my problem with freezing a movie at the beginning...
     
  4. Charlie

    Charlie Well-Known Member

    Memorex is your problem get better blank media.
     
  5. Webslinger

    Webslinger Retired Moderator

    Yes.

    Use Maxell Broadcast Quality Series 8x (not regular junk Maxells you find everywhere), Verbatim 8x & 16x, or Taiyo Yuden (not Valueline)

    For DVD+R DLs use Verbatim made in Singapore (not India) or MAM-A 8x
     
    Last edited: Feb 5, 2008
  6. vaka

    vaka Member

    memorex dvd-r

    memorex are the worst dvd-r blank that i bout and have problems all the time thats why i dont buy them anymore they suck its awaste of money
     
  7. jurio

    jurio New Member

    Thanx for your all suggestions, im really pleased of you, guys...ill buy verbatims next time in spite of i dont know exact difference between memorex dvd-rs and verbatim.

    But the best for me, is that i found out where was a problem with the bad playing of the ripped and burned movie in the beginnig....
    I feel a bit stupid :) but i didnt think that it could be in this (everything that i had to do was): UNCHECK hd dvd support and blue ray support

    So, if anyone will have a similar problem, try first to uncheck hd dvd and blue ray support, if you are ripping dvd...

    Have a nice day to all people in this forum, especially in this thread.
     
  8. Webslinger

    Webslinger Retired Moderator

    No. That makes no difference.