Good Luck Chuck Unrated

Discussion in 'AnyDVD HD (DVD issues)' started by tomcat7, Apr 28, 2008.

  1. tomcat7

    tomcat7 New Member

    I tried making an IPOD with this but AnyDVD seems to be getting lost on it. Any is what AnyDVD sees:

    Summary for drive F: (AnyDVD
    DVDRW IDE 16X A091 2
    Drive (Hardware) Region: 0 (not set!)

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 2084960 sectors (4072 MBytes)
    Total size: 4034816 sectors (7880 MBytes)

    Video DVD (or CD) label: Good_Luck_Chuck_16x9_Unrated
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1!

    RCE protection not found.
    Found & removed structural copy protection!
    Found & removed invalid cell pieces!
    Found & removed bogus title set(s)!
    UDF filesystem patched!
    Autorun not found on Video DVD.
    Found & removed 8 potential bad sector protections!
    Emulating RPC-2 drive with region 1!
  2. shannon90210

    shannon90210 Well-Known Member

    Right mouse the task bar fox and click "exit"

    1. Click start. Right click on "My computer"--->select "properties".
    2. Click on the 'Hardware' tab--->click the 'device manager' button.
    3. Open the dvd/cdrom branch---> right click on your optical drive
    4. Click "properties".
    5. You should have a region tab. From there you can select a region.
    6. Select the region that matches YOUR COUNTRY.
    7. Start Anydvd

    This eliminates the issue of "no region" being set.

  3. Webslinger

    Webslinger Retired Moderator

    In addition to what shannon90210 wrote, right-click on the fox icon on your toolbar and select "Rip video-dvd to Hard Disk". Choose your source and destination paths. Click "Copy", and wait for Anydvd ripper to finish. You can then import that rip into whatever program you want. This is an important step if the original disc contains structural protection.
  4. tomcat7

    tomcat7 New Member

    Thanks I'll try this...I don't want to lock down the region so I never set it. I'll try the rip...actually I think this DVD I have may have a scratch as I cannot play it on my TV either
  5. Webslinger

    Webslinger Retired Moderator

    You need to if you want Anydvd to work properly.

    If you get a file io3 error message, then that's probable.