error

Discussion in 'CloneCD' started by poolshark2014, May 21, 2008.

  1. poolshark2014

    poolshark2014 Well-Known Member

    I'm using the Latest AnyDvd and Clonecd to make a 1:1 backup of Strange Wilderness but for some reason when it comes to the burning part with Clonecd it gets to like 50% then gives me an error and spits out the DL disc.I am using Verbatim DL's and naming the file in Clonecd to Strange Wilderness.iso when it asks for the name of the file to be processed and made into an image.
    Should I select Clonecd Image control file as the save type or should I select
    IMAGE as the save type when naming the file?

    Can I burn resulting ISO with ImgBurn and still preserve original Layer Break?

    Is there something wrong that I am doing?


    I have wasted like 4 DL's already.
     
  2. Webslinger

    Webslinger Retired Moderator

    I don't know why you're creating .isos.


    Do not post in other people's troubleshooting threads unless you wish to assist them please. Click http://forum.slysoft.com/showpost.php?p=87585&postcount=4 and read fully. Thank you

    Follow the steps in the order that they are listed:

    1. Remove packet writing software from your system, including Roxio's Directcd, Nero's Incd, Roxio/Sonic's DragtoDisc, Drive Letter Access, CyberLink InstantBurn, NTI's Filecd, etc. click http://forum.slysoft.com/showthread.php?t=15536 and read fully


    2. Use Anydvd 6.4.2.6 beta: click http://sandbox.slysoft.com/beta/SetupAnyDVD6426.exe

    You may need to reboot after installing if prompted to do so.

    3. Click the red fox icon on your toolbar. Click "default". Click "ok".

    4.
    If you're using +R DL blank discs, I recommend using Clonecd: click http://forum.slysoft.com/showthread.php?t=327
    (follow the steps in the order that they are listed in; step by step)

    5. If you still have problems, then . . .

    A)
    a) Ensure Anydvd is running.
    b) Put the problematic original movie dvd in your burner. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG] (in other words, look for the paperclip after clicking "quote" or when creating a new thread)
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload"
    n) Close the window. When you submit reply, or submit a new thread, the .zip file will be attached automatically for us to take a look at


    B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?

    C) At what speed are you burning your blank media?



    D) Click http://forum.slysoft.com/showthread.php?t=5091 to see if your question has already been answered
     
    Last edited: May 21, 2008
  3. poolshark2014

    poolshark2014 Well-Known Member

    thanks for the mildly hostile response Web.The thing is I have done searches with no luck at all and I have already wasted 4 DL disc which I might add are Verb's so you know they are expensive to be throwing away.


    As far as the creating isos part well that's why I asked for help in the first place to see what I was doing wrong.


    I meant no disrespect by posting in someone else's thread it's just that that was my last option since I never get responses when creating my own threads.


    Hopefully everything you pointed me to will warrant a successful burn.
     
  4. Webslinger

    Webslinger Retired Moderator

    It wasn't hostile, and I'm asking you to follow the forum posting rules. It's too confusing to try to troubleshoot multiple issues within the same thread. So please make things a little easier for us. Thanks
     
  5. poolshark2014

    poolshark2014 Well-Known Member

    well tried the steps that you said and looks like another failure.It has been stuck on 50% for over 5 minutes now.Don't know what is going on here.This has never happened to me before.


    I had Anydvd running and then opened up Clonecd and selected DVD then clicked NEXT and it was already named Strange Wilderness.dvd so I clicked NEXT and it started cloning then after Cloning was done it asked me to insert Blank disc and click GO which I did and started burning and is now stuck on 50%.
     
  6. Webslinger

    Webslinger Retired Moderator

    You haven't provided any of the information I requested. click http://forum.slysoft.com/showthread.php?t=321 and answer the questions

    50% would be the layer break position (so it's hanging at the layer break). One indication that a drive is dying is that it can't burn +R DL blank media properly.
     
    Last edited: May 21, 2008
  7. poolshark2014

    poolshark2014 Well-Known Member

    What if I was to just get the Layer Break info or numbers from Clonecd and use another ripping program to make a full backup and burn with IMGBURN and under Imgburn's layer break option I input the number from Clonecd to burn with IMGBURN? Would that work properly without any pauses in the movie when it comes to the original layer break?
     
  8. Webslinger

    Webslinger Retired Moderator

    You can rip first using Anydvd ripper. And then build an iso with imgburn. Then you need to create a new layer break position using imgburn. I'd ask on the imgburn forums about how to do that.
     
  9. poolshark2014

    poolshark2014 Well-Known Member

    some info for you Web.
     

    Attached Files:

  10. Webslinger

    Webslinger Retired Moderator

    Have you tried a 2x write speed?

    Other than that I'd try a different burner.
     
  11. poolshark2014

    poolshark2014 Well-Known Member

    yeah I always burn DL's at 2x burn speed. What is a good burner that will fit in my Sony Vaio PCV-RS630G?
     
  12. Webslinger

    Webslinger Retired Moderator

    Sorry, I don't really know anything about the Vaio. I don't know if it can accept sata burners. Anyway, visit http://forum.slysoft.com/showthread.php?t=767 (you might get some ideas).
     
  13. poolshark2014

    poolshark2014 Well-Known Member

    well my current internal burner is the Pioneer DVR-108 which I've had for about 2 years now.
     
  14. Webslinger

    Webslinger Retired Moderator

    I think Zebadee likes the Pioneer dvr-115 (ide). You may want to shoot him a PM to see what he thinks.
     
  15. poolshark2014

    poolshark2014 Well-Known Member

    thanks Web.
     
  16. poolshark2014

    poolshark2014 Well-Known Member

    looks like I am going to go with the Pioneer DVR-1910LS as it matches the dimensions of my old burner.

    If anyone has this burner is it any good and would you recommend it?
     
  17. poolshark2014

    poolshark2014 Well-Known Member

    ok had the new pioneer DVR-1910LS installed and is working fine except for one thing.

    I made a 1:1 image with Clonecd and intend to burn it with Clonecd but I get a message asking me if I want to try Overburning. Why is this if I am using a Verb DL disc? It has plenty of space as it is a blank DL disc.

    What settings do I need to change to fix this.


    I replaced my old Pioneer DVR-108 because it could no longer burn DL discs and now this problem.

    This is the message I received.....IMAGE doesn't fit on destination disc!
    Space available: 7859 Mbyte (126:14:33 Min:Sec:Fra)
    Space required: 4482 Mbyte (254:1:29 Min:Sec:Fra)
    Please select how to procede

    Try to Overburn
    Write until the end of the media is reached


    What can I do to fix this?
     
  18. Webslinger

    Webslinger Retired Moderator

    I don't really understand why the smaller size is showing a longer time limit, but anyway, use a single layer dvd. With Clonecd the source size should equal the destination size.
     
  19. poolshark2014

    poolshark2014 Well-Known Member

    but the reason I am using a DL disc is so I can keep everything from the original disc.I wanted to make a 1:1 clone.This has never happened to me before.The output file created from Clonecd is 7.67gb from Strange Wilderness.Why won't clonecd let me burn that file with a DL disc to burn the 1:1 backup?
     
  20. poolshark2014

    poolshark2014 Well-Known Member

    the pioneer DVR-1910LS is actually the DVR-113NP if that makes a difference at all.By looking at my burner's capabilites through IMGBURN it is capable of doing everything except HD and Blu-ray. What gives?