Error message - Media write error----WritDVD 10 11 W2

Discussion in 'CloneDVD' started by ramman, Feb 8, 2008.

  1. ramman

    ramman New Member

    I am receiving an error message of writing to media not successful- Media write error----WritDVD 10 11 W2.

    Using blank DVD+R discs. Does anyone have any suggestions?
  2. Webslinger

    Webslinger Retired Moderator

    from Frequently Asked Questions (READ BEFORE YOU POST)

    9. I'm getting Writedvd 10 11 W2 errors. Why?

    a) Are you using junk blank media? If you're not using Taiyo Yuden (8x and not Valueline), Verbatim,, or Maxell Broadcast Quality, then chances are the answer to this question is "yes". Stay far away from Memorex, Princo, Ritek, regular Maxell, Fuji, etc. that are not made in Japan.
    b) Click this and read FULLY (because the same advice applies)
    c) Do you have Musicmatch Jukebox on your system? If so, click this
    d) Remove packet writing software from your system (including Directcd, Incd, drag to disc, DLA, etc.)
    e) Click this and read
    f) i) Ensure Anydvd is running.
    ii) Put the problematic original disc in your optical drive/reader. Wait for Anydvd to scan the disc.
    iii) Right click the red fox icon on your toolbar.
    iv) Select "Create Logfile"
    v) Wait for Anydvd to create a log file.
    vi) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    vii) Go to your My Documents folder
    viii) You will see a zip file called "" (or something similar; see step f)
    ix) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    x) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    xi) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    xii) Click the "Browse" button, and locate and select the .zip file you created.
    xiii) click "upload"
  3. ramman

    ramman New Member

    Error 10 11 W2

    I have attached the log file.Are there any errors that would prevent copying?

    Attached Files:

  4. Webslinger

    Webslinger Retired Moderator

    You have some packet writing junk on your system that needs to be removed.
    Roxio/Sonic's Drag-to-disc, which should definitely be uninstalled. Packet writing software interferes with a lot of other software, not just Slysoft's If you need drag-and-drop functionality, use dvd-ram instead (with a FAT file format), which is more stable.

    James hates this filter. Typically it comes with HP software or as an Oak cd driver, and it may cause conflicts with Clonedvd.

    Padus ASPI Shell filter driver. Comes with Nero if you choose to install it; it comes with WinDVD Creator; it comes with DiscJuggler; and it comes with NVIDIA Purevideo decoder. --cdr-forum

    1. i) Create a backup of your registry
    ii) Download imgburn. It's a free program:
    (it's also an excellent program imo)
    iii) Go to Tools > Filter Driver Load Order. Select "Cdralw2k". Click "Remove Selected Filter. Select "AFS2K". Click "Remove Selected Filter". select "CDR4_XP". Click "remove selected filter". Select "pfc". Click "remove selected filter". Click "ok".
    iv) Reboot

    Keep in mind the programs that installed those filters may no longer function properly.

    2) Check to see if there's an updated firmware version for your burner and your reader: click

    3 ) What blank media are you using? Specify a) brand name b)type (-R, +R, -RW, +RW, RAM, DL, etc.) c)media code, d) capacity/size, e) batch codes/serial codes (often found printed on the inner plastic hub of the blank disc), and f)country (factory information would be great as well, if possible) where the media was made (look on the physical packaging; do not rely on programs to accurately give you this information).

    4) At what speed are you burning your blank media?

    5) Click this and read FULLY