Error message Any DVD is disabled for drive E

Discussion in 'AnyDVD HD (DVD issues)' started by serena_b, Dec 25, 2007.

  1. serena_b

    serena_b New Member

    We are using AnyDVD and cloneDVD Mobile to put a movie on an iPod. Clove DVD mobile did not successfully copy the DVD to the iPod, so we started AnyDVD thinking that we had to use that first. We received an error message that Any DVD is disabled for the drive. Is there a setting we need to change?
    Thanks,

    Serena
     
  2. plato

    plato Well-Known Member

    Rightclick on the AnyDVD icon -> settings -> drives -> selection -> and select the drives you need (for example E) -> OK.
     
  3. Webslinger

    Webslinger Retired Moderator

    If Anydvd says your drive is disabled, ignore the message unless you also receive it
    when you have a movie inserted in that drive.
    Some drives' firmware may report the wrong
    information to Anydvd. Often Anydvd will still function properly.
    visit http://forum.slysoft.com/showpost.php?p=2891&postcount=12 (Zebadee's Anydvd works fine)