webheadjeff
Member
Thread Starter
- Joined
- Aug 12, 2017
- Messages
- 13
- Likes
- 1
In the status section of AnyDVD HD, it tells me that the region is not set. See below. But in Device Manager, the drive DVD Region says that the Current Region is Region 1. So, is AnyDVD not seeing the settings right? How can I get AnyDVD to see my Region?
Thanks,
Jeff
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Summary for drive E: (AnyDVD HD 8.1.7.8, BDPHash.bin 17-07-03)
HL-DT-ST BD-REWH16NS40 1.02 N000100SIK9DH14F491
Drive (Hardware) Region: 0 (not set!)
Current profile: DVD-ROM
Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 1
Total size: 2287776 sectors (4468 MBytes)
Video DVD (or CD) label: No Label
Media is CSS protected!
Media is locked to region(s): 1!
Video Standard: NTSC
Structural copy protection not found.
Found & removed RCE protection!
UDF filesystem patched!
Autorun not found on Video DVD.
Removed CSS copy protection!
Bad sector protection not found.
Emulating RPC-2 drive with region 1!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thanks,
Jeff
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Summary for drive E: (AnyDVD HD 8.1.7.8, BDPHash.bin 17-07-03)
HL-DT-ST BD-REWH16NS40 1.02 N000100SIK9DH14F491
Drive (Hardware) Region: 0 (not set!)
Current profile: DVD-ROM
Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 1
Total size: 2287776 sectors (4468 MBytes)
Video DVD (or CD) label: No Label
Media is CSS protected!
Media is locked to region(s): 1!
Video Standard: NTSC
Structural copy protection not found.
Found & removed RCE protection!
UDF filesystem patched!
Autorun not found on Video DVD.
Removed CSS copy protection!
Bad sector protection not found.
Emulating RPC-2 drive with region 1!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~