Dvd get stuck

Discussion in 'CloneDVD' started by Jallu, Oct 27, 2007.

  1. Jallu

    Jallu New Member

    Why my dvd`s whitch i have burn with clone dvd get stuck all the time.
    I have this problem with this new version and maybe version before that.
    Before i have made very good dvd but now i have lost many disk with this problem. I hope someone can help me. Sorry my bad english.
     
  2. James

    James Redfox Development Team Staff Member

    Please use the latest AnyDVD beta version. Thank you!
     
  3. Webslinger

    Webslinger Retired Moderator

    click http://forum.slysoft.com/showthread.php?t=8947
     
  4. Jallu

    Jallu New Member

    Still i have same problem. I have download lates anydvd version(6.1.9.3) but still my copy dvd get stuck. Is there change that problem is in my hard disk drive? But if is, why i havent before this problem?
     
  5. Coaster

    Coaster Well-Known Member

  6. Webslinger

    Webslinger Retired Moderator

    What do you mean by "get stuck"? When burning? Or while playing the backup?


    1. Update your burner's firmware (if available)
    http://forum.slysoft.com/showpost.php?p=12794&postcount=10

    2. Use good quality media (Memorex, Ritek, Princo, Fuji, TDK from Costco, and Maxell that are not made in Japan are not good quality media). Are you using inferior blank media? If you're not using Taiyo Yuden Premium, Verbatim, Maxell Plus, or Maxell Broadcast Quality, then chances are the answer is yes.
    If you use poor quality blank media, then you should expect problems.

    visit http://www.redflagdeals.com/forums/showpost.php?p=4764653&postcount=25
    and
    http://www.redflagdeals.com/forums/showthread.php?p=3976250

    3. Try lowering your burn speed (not below 4x; if you have a 16x burner and 16x rated media try writing to it at 12x instead of 16x; an 8x burn speed on 16x rated media wouldn't be a bad idea either)

    4. If you're using +R, +RW, or +R DL media, change the booktype to "dvd-rom"
    http://forum.slysoft.com/showthread.php?t=476 (step 3)

    5. Avoid sticker labels (they tend to cause problems)

    6. Try setting a custom size of 4300 in Clonedvd (but if you're using good media, you shouldn't have to) if you're using regular single layer dvd-5 (4.7GB) discs.

    7. Download Nero cd-dvd speed. It's a free program. Select the tab labeled "scandisc". Insert the problematic backup disc, select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your backup is bad (which is the most likely case), your optical drive may be slowly dying, or your optical drive simply doesn't like the disc (or your choice of blank media)--even if the disc looks fine.


    Bad burn quality is notorious around the end of discs (see step 6)
    and also at layer breaks when using low quality DL media (use Verbatim +R DL media made in Singapore, and change the booktype to "dvd-rom")


    Also, check the preview screen in Clonedvd to ensure you're backing up the proper title.


    read http://forum.slysoft.com/showthread.php?t=476 fully please
     
  7. Jallu

    Jallu New Member

    How i change custom size to 4300?

    I use Philips dvd-r(made in Taiwan) disc.
     
  8. Webslinger

    Webslinger Retired Moderator

    Near the quality bar in Clonedvd you will find a drop-down box.

    Don't. Use Taiyo Yuden (premium) or Verbatim (not made in India)
     
  9. Coaster

    Coaster Well-Known Member

    @ Jallu,

    Perchance have you reviewed Forum Member Webslinger #6 posting?

    What is the answer to Forum Member Webslinger above question?

    Also note->
    Regards,
    Coaster