DL burning problems

Discussion in 'CloneDVD' started by severe, Apr 9, 2007.

  1. severe

    severe Member

    I've been burning dual layered backups for about 6 months now (successfully) with clonedvd. After the latest upgrade of anaydvd, I am unable to do so now. Clonedvd shows the progress percentage of the dl disc being burned like usual and when its done, you can actually see that something has been burned to the disc. But when I put the disc back in, my system says its a blank disc. I hope I made this clear enough.....can someone pleeeeeeeeeeeeeeeeeeeease help because these dl disc are a little too costly to keep wasting.....thanks!!!!
     
  2. Whisperer

    Whisperer Well-Known Member

    Are you using Verbatim brand DL blank disks?

    Whisperer
     
  3. severe

    severe Member

    yes I am.....any suggestions?
     
  4. G-Omaha

    G-Omaha Well-Known Member

    Clean the drive??
     
  5. severe

    severe Member

    I tried that too. But I am still having the same problem and its only with dual layered, singles burn fine.....:(
     
  6. Webslinger

    Webslinger Retired Moderator

    1. Visit your burner's website, and update your burner's firmware if possible.
    If you don't know how to go about doing this, visit http://forum.slysoft.com/showpost.php?p=12794&postcount=10

    2. For "+R, +RW, +R DL" blank media, change the booktype of the blank media you're using to "dvd-rom", if your burner supports bitsetting changes. This step improves the chances of playability in/compatibility with (standalone, mostly) dvd players. The best way to do this is through the software that came with your burner (if possible).

    3. Select "dvd+/-r dl" near the quality bar in Clonedvd2.

    4. Try a 4x burn speed (if possible)


    5. Click this

    Do what it says to do.


    6. visit http://forum.slysoft.com/showpost.php?p=21907&postcount=11 (thanks to Zebadee)
    Use one of the programs mentioned, and list your Lowerfilters and Upperfilters in your next post.

    Or for XP users only,
    Click Start, Run
    type regedit
    Go to
    HKEY_LOCAL_MACHINE\SYSTEM\Current Control Set\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}

    We want what's listed in "LowerFilters" and "UpperFilters". List your Lowerfilters and Upperfilters in your next post.

    Before you do this visit http://www.cdr-zone.com/forum/about4719.html, and read the first post please, so you can get a better understanding of what is going on.
     
  7. severe

    severe Member

    okay....I did all of the above except step 2 (wasn't able to do it). I still can't burn a dl disc.

    heres the last step

    [​IMG]

    Thanks for your time
     
  8. Webslinger

    Webslinger Retired Moderator

    Last edited: Apr 10, 2007
  9. severe

    severe Member

    Thank you Webslinger for all of your help, but I think I'm going to throw in the towel now. I've tried everything and I am still having the same problem so I am going to chalk it up to my samsung burners are burned out......thanks again for your assistance.
     
  10. thecheif

    thecheif New Member

  11. Webslinger

    Webslinger Retired Moderator

    1. Visit your burner's website, and update your burner's firmware if possible.
    If you don't know how to go about doing this, visit http://forum.slysoft.com/showpost.php?p=12794&postcount=10

    2. For "+R, +RW, +R DL" blank media, change the booktype of the blank media you're using to "dvd-rom", if your burner supports bitsetting changes. This step improves the chances of playability in/compatibility with (standalone, mostly) dvd players. The best way to do this is through the software that came with your burner (if possible).

    3. Select "dvd+/-r dl" near the quality bar in Clonedvd2.

    4. Try a 4x burn speed (if possible)


    5. Click this

    Do what it says to do.


    6. visit http://forum.slysoft.com/showpost.php?p=21907&postcount=11 (thanks to Zebadee)
    Use one of the programs mentioned, and list your Lowerfilters and Upperfilters in your next post.

    Or for XP users only,
    Click Start, Run
    type regedit
    Go to
    HKEY_LOCAL_MACHINE\SYSTEM\Current Control Set\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}

    We want what's listed in "LowerFilters" and "UpperFilters". List your Lowerfilters and Upperfilters in your next post.

    Before you do this visit http://www.cdr-zone.com/forum/about4719.html, and read the first post please, so you can get a better understanding of what is going on.

    7. Try this method: http://forum.slysoft.com/showthread.php?t=327