http://static.slysoft.com/SetupCloneBD.exe 1.0.5.3 2015-08-19 fix: stream creation when EAC3 or Dolby True HD streams are used in legacy AC3 format
http://sandbox.slysoft.com/beta/SetupCloneBD1060Beta.exe 1.0.6.0 2015-10-11 (beta) fix: libstdc++-6.dll was missing in setup of ver 1.0.5.9 updated languages (nl, sv) 1.0.5.9 2015-10-10 (beta) new: added video encoding support for H.265/HEVC, requires a HEVC capable hardware or software player (such as VLC). For Win x64 only. Experimental! new: added statistics to the completion page new: added support for PGS (Blu-ray) subtitle in external containers new: added support for burned subtitles change: allow selection of subtitle type (BD/DVD) for MKV creation change: allow video codec selection on output page (currently only MKV) fix: subtitle + video-lossless hang minor fixes and improvements updated languages
http://sandbox.slysoft.com/beta/SetupCloneBD1061Beta.exe 1.0.6.1 2015-10-15 (beta) new: added support for HEVC in .mp4 (VLC plays mp4/HEVC > ver 2.2.0) new: HEVC support for Windows 32 bit (ver 1.0.5.9 was Win x64 only) new: size slider on output page reflects good/bad quality depending on output size and codec (note that "quality" remains a subjective measure, this is merely an aid) new: display encoding bit rate on progress page change: removal of obsolete DLL libraries change: disable preview image during burning change: updated estimated encoding time to better represent faster engine and consider HEVC fix: bert's warning messages sometimes were not shown again, if shown earlier. fix: fixed behavior of "select all" checkbox in subtitle preferences on selection page fix: MPEG-2 profile in files minor fixes and improvements updated languages
http://static.slysoft.com/SetupCloneBD.exe 1.0.6.2 2015-10-16 new: added support for DTS audio in .mkv (Experimental) new: select default language for audio and subtitles when creating partial disc copies (selected audio/subtitle language will be active from the start of playback). minor fixes and improvements updated languages Complete history: http://www.slysoft.com/download/changes_clonebd.txt
http://static.slysoft.com/SetupCloneBD.exe 1.0.6.3 2015-10-22 new: a debug log window can be opened through settings new: ensure that user doesn't select the source path as destination path new: added button to reset temporary folder (to default windows TEMP folder) change: remember preferred audio/subtitle language for partial BD copies change: improved estimater adds required header and TS overhead to downconverted audio for more accurate output size estimation change: when overwriting an existing folder, delete existing contents of the BDMV sub-folder first change: colorized sub-folders of destination/temporary path on target page to improve comprehensibility fix: remove dll dependency on dbghelp fix: clip entry marks to match clip intime fix: compatibility issues with Windows XP, Windows Vista fix: BD video encoder fixed. BDs didn't play on some Panasonic players. minor fixes and improvements updated languages
http://static.slysoft.com/SetupCloneBD.exe 1.0.6.4 2015-10-30 new: add popup menu to partial BD copies, allowing to select audio and subtitle languages new: add support for PAL encoded AVC streams on BD [first BD ever found; MILLENIUM EXTENDED NL] (closes #5183) new: support for lossless MLP/TrueHD streams in .mkv/.mp4 new: support for lossless LPCM streams in .mkv/.mp4 fix: fxed MPEG-2 stream, video must not use global headers fix: frame loss fixed when using AAC encoder fix: discard audio frames in external containers when transferring lossless fix: compensate audio when using original video fix: ensure muxed IG streams (like AnyDVD speedmenu) are preserved fix: rogue subtitle at end of .mkv that increases stream duration minor fixes and improvements updated languages
http://static.slysoft.com/SetupCloneBD.exe 1.0.6.5 2015-11-03 new: added support for BDs recorded by STBs (MPEG-2 1440p) fix: certain GPUs deliver non-32bit aligned surfaces (resolution 720x480 or 720x576), caused crash in SSE2 VUV to RGB conversion. fix: BD popup menus now work on Panasonic players fix audio channel assignment to prevent errors when decoding audio minor fixes and improvements updated languages
http://static.slysoft.com/SetupCloneBD.exe 1.0.6.6 2015-11-04 fix: playback of Dolby TrueHD streams on Panasonic, PS4 fix: playback of AC-3 on TMT fixed: transcoders no longer stalls for some subtitle streams updated languages, added Norwegian
http://static.slysoft.com/SetupCloneBD.exe 1.0.6.6 2015-11-04 fix: playback of Dolby TrueHD streams on Panasonic, PS4 fix: playback of AC-3 on TMT fixed: transcoders no longer stalls for some subtitle streams updated languages, added Norwegian
http://static.slysoft.com/SetupCloneBD.exe 1.0.6.7 2015-11-13 new: added lossless video transfer preset for .mp4/.mkv (cosmetic issue: sliders for file size and resolution are technically but not visible disabled yet) new: improved speed when transcoding lossless video (up to 300% faster) fixed: some very large subtitles when creating files with DVD subtitle streams fixed: aborts because of low memory fixed: high CPU usage when writing files fixed: deadlocks at the end of transcoding fixed: undecodable PG streams minor fixes and improvements updated languages
http://static.slysoft.com/SetupCloneBD.exe 1.0.6.8 2015-11-13 new: adapt UI behavior to conform to file-mode lossless feature fix: encoder/decoder buffer guards (crash while transcoding/snaphotting)
http://static.slysoft.com/SetupCloneBD.exe 1.0.6.9 2015-11-18 fix: preview player stopped working after 30 sec fix: clips with only 1 frame were not copied fix: some clips started with distorted frames fix: reliability of Alt-key (show log options) on completion page fix: burnengine handled forward slash path delimiters unreliably (caused spurious "invalid destination path" errors on ISO generation) minor fixes and improvements updated languages
http://static.slysoft.com/SetupCloneBD.exe 1.0.7.0 2015-11-27 new: removal of filler data when using lossless video fix: lossless AVC in .mkv Container (not all players support full frames as payload) fix: failed to create files in directories with multiple contiguous spaces fix: processing of titles with secondary video may have failed prematurely fix: direct 3d support no longer required for transcoding (preview player with be dark) minor fixes and improvements updated languages
http://static.slysoft.com/SetupCloneBD.exe 1.0.7.1 2015-12-10 new: added support for MPEG-4/AVC "PAL" frame rate new: added support for MPEG-4/AVC "PAL" 4:3 aspect ratio new: added support for MPEG-4/AVC recorded by Japanese BD recorders new: added super-large LPCM frame support (192 kHz, 24 bit, 7.1) change: improved behavior selecting the largest clip to determine appropriate bitrate when creating single-file output with multi clip movies change: add immediate error message on read errors change: DTS conversion finalized appropriate bit rates added fix: problems reading files from disc with non-ascii characters (unicode) in the filename fix: settings dialog was too small on windows systems with oversized fonts (>130%) fix: support weak GPU that do not support 1920x1080 surfaces fix: invalid user data in MPEG-2 streams fix: crashes when transcoding MPEG-2 streams minor fixes and improvements updated languages
http://static.slysoft.com/SetupCloneBD.exe 1.0.7.2 2015-12-22 - new: option to adjust audio volume when converting to file - change: appearance of subtitle languages when only single selections are possible on selection page now correctly changed to "radio button style". - change: improved memory usage - fix: BD full copy: some menus (esp. Warner) wouldn't play on some hw players, due to missing CPI-Map - fix: prevent possible dll side-load attack during installation - fix: better crash handling - fix: synchronize threads after decoding or when decoding fails - minor fixes and improvements - updated languages
http://static.slysoft.com/SetupCloneBD.exe 1.0.7.3 2016-01-14 new: check for available profile updates in device mode new: filter downloadable devices using search patterns new: support for home made videos new: support for Pinnacle produced discs new: support for more set-top boxes (STB) that create blu-ray like discs change: assume provided screen resolution in profile list is always to be landscape format (corrects "native" resolution display for several devices) change: add video resolution limit entry (applies to for example: ipad, max: 1280x720) change: prevent user error: don't allow attempted creation of files larger than 4GB on FAT/FAT32 file systems. fix: double-clicking the cover button (designed for single-click) on the input page could crash CloneBD fix: size preselection for BD output dropdown on output page did not take audio compression into account when graying out insufficient sizes (esp. BD-5 and BD-9) fix: MKV profile for permanent subtitles (not selectable) was broken fix: possibility to create file names containing multiple dots fix: to prevent dll sideload attack, installer copies itself to a safe directory. Thanks to Stefan Kanthak for pointing this out. fix: uninstaller is now started from program directory, not temp fix: multi-clip playlists sometimes not completely converted to file (MP4/MKV, example: Legend of the Guardians, EUR) fix: allow for multiple subviews in MVC streams fix: skip broken frames at the end of some clips fix: audio decoding problems with some Star Wars movies fix: more non-standard frame rates of video fix: vc-1 crashes with some interlaced formats fix: unresponsive transcoding when too many subtitles are selected fix: some discs (mostly Warner) wouldn't play on some standalone players (mostly Panasonic) fix: some movies resulted in slightly pixelated video when converting to lossless video MKV minor fixes and improvements updated languages
http://static.slysoft.com/SetupCloneBD.exe 1.0.7.4 2016-02-04 new: directly burn folder/ISO to disc/ISO: when creating 1:1 copies to ISO or disc without video or audio compression the source is directly burned/assembled without intermediate transcoding. new: after failed burn, allow to retain temporary files for later (re-)processing. new: more support for home-made movies new: more support for Blu-rays created by Nero new: new format of AC-3 encoding new: more support for PAFF encoded AVC streams new: less memory consumption when transcoding change: speed of filmstrip snapshot generation increased greatly change: reduce the minimum allowed bitrate for HEVC by 30% fix: menu creation could fail in combination with unfavorable timing. fix: update device dialog did not flag outdated device profiles correctly and continued to offer "updates", that have already been made. fix: selecting a new disc for processing after completing a transcode could cause a crash fix: secondary video stream may not be copied correctly fix: lossless transfer of VC-1 was broken for interlaced video fix: audio decoding of some DTS-HD HRE streams fix: tags in matroska are now written in correct order fix: tags in mov/mp4 now conform to ISO 14496-14 fix: some heap corruption minor fixes and improvements updated languages http://static.slysoft.com/SetupCloneBD.exe
http://static.slysoft.com/SetupCloneBD.exe 1.0.7.5 2016-02-09 fix: selecting a new disc for processing after completing a transcode could cause a crash (final fix) fix: audio decoding of DTS-ES 6.1 (Star Wars, episode IV A New Hope) minor fixes and improvements updated languages
http://static.slysoft.com/SetupCloneBD.exe 1.0.7.6 2016-02-12 fix: enable and auto-configure hidden playlists when creating partial copies with original menu requested. fix: previous version was incompatible with Windows XP fix: change decoding of DTS-HD streams (DTS-HD HRE, DTS-HD MA, DTS-ES) fix: dts channel layout is now correctly processed during transcoding minor fixes and improvements updated languages
