Dernière version de CloneBD

[Tom]

CloneBD 1.0.3.4

http://static.slysoft.com/SetupCloneBD.exe

1.0.3.4 2015-03-19

• change: reduced the expected capacity for blu-ray media slightly
• change: sorting order of audio streams in file/device output
• change: optimize PMT (Program Map Table) generation
• change: added more attribute information to PSI (Program Stream Information) structures in m2ts
• fix: some partial copies would not play beyond the menu. Removing IM Sync type subpaths now to fix this.
• fix: check some out-of-memory conditions (fixes some crashes)
• fix: misidentified PIDs in PiP substreams, caused problems with subtitles on some discs
• minor fixes and improvements
• updated languages

 

[Tom]

CloneBD 1.0.3.5

http://static.slysoft.com/SetupCloneBD.exe

1.0.3.5 2015-03-24

• new: down convert HD audio to AC3 when creating BD copies.
• change: improved resize and initialize behavior of language box on selection page.
• change: allow selection of burn speeds (2x, 4x, 6x) even when type of medium is unknown (source drive = destination drive)
• change: improved output size estimation should be more accurate now, especially, when not using video compression.
• minor fixes and improvements
• updated languages

 

[Tom]

CloneBD 1.0.3.6

http://static.slysoft.com/SetupCloneBD.exe

1.0.3.6 2015-03-25

• new: added statistics per clip when not using compression
• change: improved size estimation for HD audio
• change: disable audio downconvert-button when HD audio was not selected
• updated languages

 

[Tom]

CloneBD 1.0.3.7

http://static.slysoft.com/SetupCloneBD.exe

1.0.3.7 2015-03-26

• fix: estimator values were not correctly retrieved from cache
• fix: chapter mark filtering in clipping mode.
• fix: improved error detection when video encoder fails
• fix: properly add .mkv/.mp4 chapter markers
• fix: encoding of large video frames (> 1 MiB)
• updated languages

 

[Tom]

CloneBD 1.0.3.8

http://static.slysoft.com/SetupCloneBD.exe

1.0.3.8 2015-03-27

• fix: asynchronous writer would not flush data, which broke short files (also caused SpeedMenus to fail)
• fix: watermark detection was broken
• new: allow direct jump to main title (bypassing the menu) on playback of converted discs
• updated languages

 

[Tom]

CloneBD 1.0.3.9

http://static.slysoft.com/SetupCloneBD.exe

1.0.3.9 2015-04-10

• new: display estimated uncompressed output size on selection page, when creating partial BD copies. [#656]
• new: add burner log to CloneBD log file to further study spurious write errors on BD-Rs
• change: improved secondary video size estimation
• change: improved drop clips with differing streams/missing audio on MKV/MP4 encode [#3287]
• change: copy instead of compress secondary video
• change: size units for KB, MB, GB, TB have been changed from IEC "binary representation" (1024^x) to SI (decimal) representation (1000^x) to better match the sizes of storage media and for less confusion. If IEC values are to be displayed, they will be denoted with KiB, MiB, GiB, ... respectively.
• change: ensure user can't manually specify a non-empty temp path, as this can cause the result to be too large for the blank disc (append a postfix, if nonempty temp was specified) [#3346]
• change: log actual sectors when encountering read errors
• fix: skip unsupported CC in MPEG-2 [#2104]
• fix: support for very chatty x264 encoder used on some BDs
• minor fixes and improvements
• updated languages

 

[Tom]

CloneBD 1.0.4.0

http://static.slysoft.com/SetupCloneBD.exe

1.0.4.0 2015-04-11

• change: disc hash includes additional files to better detect differences caused by decryptor tools
• change: extended burner logging
• fix: remove path delimiters from disc descriptions when deriving mkv/mp4 filenames. [#3460]

 

[Tom]

CloneBD 1.0.4.1

http://static.slysoft.com/SetupCloneBD.exe

1.0.4.1 2015-04-12

• fix: sometimes convert uncompressed even through compression was selected. [#3487, #3163, #3465, #3467]
• fix: installer will no longer try to install files after a reboot, but throw an error message instead, if a file can't be written (reported by Ch3vr0n)
• updated languages

 

[Tom]

CloneBD 1.0.4.2

http://static.slysoft.com/SetupCloneBD.exe

1.0.4.2 2015-04-15

• improved: rate plotter
• improved: remaining time prediction
• improved: added overhead data to estimation when doing complete copies (in some cases JAR folders are enormous)
• change: make slider automatically adjust to disc size on target page, if destination drive is not the same as source drive.
• change: timeout estimator bar in case a packet could not be retrieved (otherwise Go-button would remain disabled)
• fix: when burning multiple discs in a row, read/write error counts were not reset.
• fix: uncompressed copies had a tendency to overshoot estimated output size. Now estimating video bitrate less conservatively.
• fix: trim paths entered by user, to remove trailing spaces.
• fix: "Go" button sometimes did not refresh correctly, when state changes from disabled to enabled (would appear disabled, until hovered with mouse)
• fix: burner logging crashed and required overly huge memory blocks
• minor fixes and improvements
• updated languages

 

[Tom]

CloneBD 1.0.4.3

http://static.slysoft.com/SetupCloneBD.exe

1.0.4.3 2015-04-18

• improved: burn engine. Some (not all) write errors we're false positives
• improved: adjust reported unformatted blank disc sizes to expected actual capacity
• change: preselect the respective disc size in the size selection dropdown on target page according to inserted disc. As a side effect, discs/drives reporting too large capacity have no negative impact on size output.
• fix: Bert's error information on completion page sometimes vanished after a few seconds
• fix: automatic disc requester did not show on burn retries (automatically wait for new disc)
• minor fixes and improvements
• updated languages, added Welsh

 

[Tom]

CloneBD 1.0.4.4

http://static.slysoft.com/SetupCloneBD.exe

1.0.4.4 2015-04-24

• new: added warning message, when resulting size exceeds the size of a BD-R50
• improved: estimate proportional size of Dolby TrueHD tracks for higher precision.
• improved: ensure, that burn engine does not write over the capacity limit in case data has oversize
• fix: in case of excessive amounts of read errors/data corrupt errors, a memory overflow could happen.
• fix: prevent crash, when querying incomplete or invalid playlists with zero playlist elements.
• fix: crashes on Windows XP
• minor fixes and improvements
• updated languages

 

[Tom]

CloneBD 1.0.4.5

http://static.slysoft.com/SetupCloneBD.exe

1.0.4.5 2015-04-26

• fix: CloneBD crashed in HDMV menu generation when making a partial copy
• updated languages

 

[Tom]

CloneBD 1.0.4.6

1.0.4.6 2015-04-26

• fix: CloneBD crashed when making a complete copy of a BDMV folder
• http://static.slysoft.com/SetupCloneBD.exe

 

[Tom]

CloneBD 1.0.4.7

http://static.slysoft.com/SetupCloneBD.exe

1.0.4.7 2015-04-29

• improved: error descriptions more verbose
• change: focus on completion page. Should fix the issue causing the Alt-key sometimes not to reveal the log buttons.
• fix: disc title would not show on certain sources, when opened from HDD
• fix: Dolby Atmos (TrueHD) estimation causing oversize.
• fix: resuming after pausing sometimes wouldn't resume the clock (remaining/elapsed time)
• fix: preview while transcoding without compression was broken.
• fix: preselecting 50GB BD-R could result in slight compression, even if not required.
• minor fixes and improvements
• updated languages

 

[Tom]

CloneBD 1.0.4.8

http://static.slysoft.com/SetupCloneBD.exe

1.0.4.8 2015-05-20

• new: option to maintain original menu with partial copies (use with caution! Discs may behave erroneously depending on what was deselected)
• change: installer updated to work with Windows 10
• change: propagate errors correctly, when HDMV menu generation fails
• change: set default button in CloneBD disc menu, when copied disc has only one playlist
• change: improved support for AC-3 output
• change: improved meta information in .mkv files
• change: added DTS-HD information according to Matroska spec
• change: language tags changed to ISO639-2
• fix: processing on systems with incompatible graphics card cause crash
• fix: uncomplete or invalid disc structures could cause crashes. Added sanity check prior to processing such disc.
• fix: implemented minimum possible bitrates for resulting video to avoid overshoot.
• fix: handle of timeline slider for preview player sometimes wasn't accessible.
• fix: some asserts in x264
• fix: audio distortion when encoding AAC
• fix: audio silence in some DTS streams
• fix: subtitles trimmed to video size
• fix: subtitles were displayed at a wrong time
• fix: preliminary supported for "forced" subtitles in .mp4/.mkv
• fix: VC-1 interlaced fields were displayed in wrong order
• fix: VC-1 trimmed bottom replaced by black box
• fix: AVC trimmed bottom replaced by black box
• minor fixes and improvements
• updated languages

 

[Tom]

CloneBD 1.0.4.9

http://static.slysoft.com/SetupCloneBD.exe

1.0.4.9 2015-06-14

• new: bt709, smpte170m color space definitions are now used/kept during transcoding
• new: AVC High@High for Xbox One, PS4
• new: better ATOM layout in .mp4 (allows 3rd party tools to better change "ID3"-tags)
• new: modifyable YUV color table for subtitles in .mkv
• change: AC3 encoder using float (not int)
• change: memory usage reduced by 150 MB when using AVC encoder
• changed: AVC now encoded as "zero-latency" on chapter marks
• change: assert handling in libx264 which deadlocks drone processes
• change: AAC encoder uses better encoding settings
• change: color space of video (when set) is also set in AVC
• change: AC-3 encoder now sets core attributes correctly
• fix: more assertions in libx264
• fix: bitstream encoder used signed-shifting
• fix: high-frequency (VQ) decoding was broken in DTS, creating "noise"
• fix: various fixes for playback on PS4 (according to Sony Recommendation Gibberish)
• fix: playback issues with encoded AVC on Xbox One
• fix: playback issues with lossless AVC on Xbox One
• fix: .mp4 not seekable on PS4
• fix: .mp4 not showing chapters, title on PS4
• fix: .mp4 playback issues on PS4
• fix: .mp4 playback issues on Xbox One (reduced macroblock complexity)
• fix: avoid negative DTS/PTS delta when using 2-B frames
• fix: VC-1 interlaced decoding
• fix: AVC interlaced decoding (PAFF/MBAFF)
• fix: "jump to main title directly" option was broken after "keep original menu" option was added.
• workaround: omit clips with non-matching stream types when creating device/file output.
• minor fixes and improvements
• updated languages

 

[Tom]

CloneBD 1.0.5.0

http://static.slysoft.com/SetupCloneBD.exe

1.0.5.0 2015-07-24

• new: display main video bitrate on target page (note: this bitrate currently applies to the largest clip to be converted only)
• new: more bitrates available when converting to files/devices (allows for smaller files)
• new: options to convert HD audio or all audio to AC3 (sorry, no DTS yet), allowing to force stereo and select bitrates. This will help reduce overall file sizes a lot in many cases, where audio quality is of no great concern.
• change: improved transcoding speed when only compressing/converting audio
• fix: miscalculation of partial clips in estimator caused oversize results
• fix: crash in x264 encoder
• fix: deadlock in x264 encoder
• fix: all assert message boxes that freeze x264 encoder
• fix: minimum possible bitrate calculation didn't account for small resolutions in file/device mode
• fix: layout problems on target page, rearranged options in preparation for more audio options to come.
• minor fixes and improvements
• updated languages

 

[Tom]

CloneBD 1.0.5.1

http://static.slysoft.com/SetupCloneBD.exe

1.0.5.1 2015-08-01

• fix: bug introduced in v1.0.5.0 caused uncompressed copies to (possibly) fail on some standalone players.
• fix: crash when creating MKB with lossless or core audio
• fix: possible crash when copying clips w/o video
• fix: top-menu button was disabled when playing back a disc with CloneBD menu.
• fix: DTS-HD lossless audio in .mkv
• minor fixes and improvements
• updated languages

 

[Tom]

http://static.slysoft.com/SetupCloneBD.exe

1.0.5.2 2015-08-17

• new: support for angles implemented, allows for selection of specific angles or keeping all angles (BD-BD copies only, of course).
• fix: temporary workaround: subtitles etched on mkv video output until selectable subs are properly fixed (coming up soon)
• added enhanced debug and crash log gathering to determine the cause of video encoder crashes
• minor fixes and improvements
• updated languages

 

[RedFox 1]

Thanks Tom, good progress, using it frequently and having almost no issues at all.