Copy of Good Luck Chuck posts error on playback

Discussion in 'CloneDVD' started by weston, Jan 22, 2008.

  1. weston

    weston New Member

    I have read several posts about copying Good Luck Chuck, but none answers my problem. Using recently purchased Anydvd and Clonedvd, I get the copied successful message. So far, I have been able to successfully copy and play back 12 other new release movies with no problems using these tools. However, when attempting playback of this Good Luck Chuck copy on PowerDVD ver. 4, I get the error code 8902003 saying the disk is damaged. In addition, the burned disk will not play back on my Toshiba player while displaying a damaged disk message. I used both Memorex and Sony media. I then used the Anydvd and Icopydvds2 ver. combination and successfully made a playable copy of Good Luck Chuck. I cannot figure out why the latest posted version of Clonedvd will not work on this movie.
  2. Webslinger

    Webslinger Retired Moderator

    Junk. Avoid. If you use Memorex, you should expect problems

    Average to somewhat decent (and better, on average, than Memorex)

    Use Verbatim, Taiyo Yuden (not Valueline), or Maxell Broadcast Quality (not regular Maxell)

    1. Use Anydvd beta: click

    You may need to reboot after installing if prompted to do so.

    2. Click the red fox icon on your toolbar. Click "default". Click "ok".

    3. Use the latest Clonedvd beta: click

    4. Follow the steps from this link in order: click (follow them step by step)

    5. If you still have problems, then . . .

    A) a) Ensure Anydvd is running.
    b) Put the problematic original disc in your optical drive/reader. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload"

    B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?
    Last edited: Jan 22, 2008