Copy But Not (disney)

Discussion in 'AnyDVD HD (DVD issues)' started by DVSARGE6, Dec 18, 2007.

  1. DVSARGE6

    DVSARGE6 New Member

    Tried To Burn Underdog And Santa Clause 3, Among A Many Others. The Program Completes And The Disc Looks Fine, But I Can Only Get As Far As The Menu, Then When I Press Play The Disc Starts Over Again. I Tried To Play The Disc On 4 Different Dvd Players And Recorder/players And I Get The Same Results. Even Tried To Burn On Different Computers, But Always The Same Result. Can Anyone Help, Please.:(:(

    Thanks,
    Dvsarge6
     
  2. Webslinger

    Webslinger Retired Moderator

    1. Ensure you're using Anydvd 6.3.0.1 beta: click http://forum.slysoft.com/showthread.php?t=10591

    2. Ensure you're not using "remove annoying adverts and trailers" in Anydvd.

    3. a)Click the red fox icon on your toolbar.
    b) Navigate to "Program Settings".
    c) Click "enable logging".
    d) Click "ok".
    e) Put the problematic original disc in your optical drive/reader.
    f) Go to your My Documents folder
    g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"

    4. a)State the specific version(s) of the burning application(s) you are using (and stating "latest versions" isn't sufficient information; use full version numbers), and b)the specific version(s) of whatever other burning application(s) you have installed on your system.

    5. What blank media are you using? Specify a) brand name b)type (-R, +R, -RW, +RW, RAM, DL, etc.) c)media code, d) capacity/size, e) batch codes/serial codes (often found printed on the inner plastic hub of the blank disc), and f)country (factory information would be great as well, if possible) where the media was made (look on the physical packaging; do not rely on programs to accurately give you this information).

    If you don't know how to obtain media codes, you may find the following programs useful:

    http://dvd.identifier.cdfreaks.com and http://www.dvdinfopro.com/

    6) At what speed are you burning your blank media?