CloneDVD keeps freezes at the end of creating files

Discussion in 'CloneDVD' started by gabulldawg_34, Sep 29, 2007.

  1. gabulldawg_34

    gabulldawg_34 Member

    Hello anyone that can help would be great when it finishs a dvd creating and starts to burn it freezes up and can not get nothing to work I have done disk defragment and disk cleanup really dont know what else to do it was working fine til last night any help would be appricated thank you for your time
     
  2. Webslinger

    Webslinger Retired Moderator

    from Frequently Asked Questions (READ BEFORE YOU POST)

    4. Why is Clonedvd hanging when it's almost finished burning a disc around 99-100%? My burner won't eject as well.

    1. Iolo Antivirus with System Mechanic issue

    source http://forum.slysoft.com/showthread.php?t=4027

    It seems reasonable to suspect other Antivirus programs might interfere as well.
    Might as well add Avira Antivir Guard to the list: http://forum.slysoft.com/showthread.php?t=6943

    2. Disable the .wav sound that plays at the end of the burn

    source http://forum.slysoft.com/showpost.php?p=12096&postcount=8

    3. Try a custom size of 4300 if you're using regular single layer blank media

    Try setting a custom size of 4300 near the quality bar in Clonedvd (but if you're using good media, such as Taiyo Yuden Premium, Verbatim, Maxell Plus, or Maxell Broadcast Quality, you shouldn't have to) if you're using regular single layer dvd-5 (4.7GB) discs. Bad burn quality is notorious around the end of discs. Using a custom disc size of 4300 ensures you won't be burning to the end.



    Other things to try that may help include:

    A. Update your burner's firmware (if available)
    http://forum.slysoft.com/showpost.php?p=12794&postcount=10

    B. Use good quality media (Memorex, Ritek, Princo, Fuji (not made in Japan), TDK from Costco, and general Maxell that you can find in most stores (not made in Japan) are not good quality media. Are you using inferior blank media? If you're not using Taiyo Yuden Premium, Verbatim, Maxell Plus, or Maxell Broadcast Quality, then chances are the answer is yes.
    If you use poor quality blank media, then you should expect problems.
    visit http://www.redflagdeals.com/forums/showpost.php?p=4764653&postcount=25
    and
    http://www.redflagdeals.com/forums/showthread.php?p=3976250

    C. Try lowering your burn speed (not below 4x; if you have a 16x burner and 16x rated media try writing to it at 12x instead of 16x; an 8x burn speed on 16x rated media wouldn't be a bad idea either)

    D. Avoid sticker labels (they tend to cause problems)

    E. Try setting a custom size of 4300 in Clonedvd (but if you're using good media, you shouldn't have to) if you're using regular single layer dvd-5 (4.7GB) discs.



    Bad burn quality is notorious around the end of discs (see step E)
    and also at layer breaks when using low quality DL media (use Verbatim +R DL media made in Singapore, and change the booktype to "dvd-rom")



    read http://forum.slysoft.com/showthread.php?t=476 fully please