CloneDVD eating up recordable discs

Discussion in 'CloneDVD' started by mildot, Feb 7, 2007.

  1. mildot

    mildot Member

    Well for the most part the software is great. It seems that for some reason about 2/3's of the way through I get the "recordable media problem" hence replace the disk with a new one. This is getting expensive to record one movie. I have changed the speed to 8X as opposed to maximum. Anything I'm doing wrong?
     
  2. DetroitBaseball

    DetroitBaseball Well-Known Member

    You should fit a DVD9 on a DVD5, thus saving media.
     
  3. Webslinger

    Webslinger Retired Moderator

    http://forum.slysoft.com/showthread.php?t=476

    Read this closely, especially the first three steps and step 12.
     
  4. mildot

    mildot Member

    Help

    Ok here's the spec's to my computer, a Dell Inspiron 6000(Processor: Intel Pentium M730 1.6GHz, ATI Radeon Mobility X300 128MB, 15,4" wide screen XGA, 512 MB 333MHz DDR2 RAM, 40 GB Ultra ATA hard disk 5400 rpm, 24x CD-RW / 8x DVD combo drive, Intel ProWireless 2200 802.11 b/g WiFi)

    That said I'm "lost" when it comes to "firmware" I mean I can get around for program updates but I'm stumped on this one. Great advice I just need to get pointed in the right direction.Cheers
     
  5. DetroitBaseball

    DetroitBaseball Well-Known Member

    What is the model for your drive you are using? I can check for an update for you.
     
  6. Webslinger

    Webslinger Retired Moderator

  7. mildot

    mildot Member

    burner

    Here it is. THANKS Bud.
    No Disc is present in Drive D:!
    SONY DVD+-RW DW-D56A PDS3 2004/07/30 08:00
     
  8. DetroitBaseball

    DetroitBaseball Well-Known Member

  9. mildot

    mildot Member

    firmware upgrade

    Ok we are "good to go" can't thank ya enough. Great to have troops help ya out when you are in need. Cheers Bud
     
  10. DetroitBaseball

    DetroitBaseball Well-Known Member

    You mean you updated your firmware? What about the other problem?
     
  11. mildot

    mildot Member

    Well I'm burning a movie right now so I'll let ya know. I have faith.
     
  12. DetroitBaseball

    DetroitBaseball Well-Known Member

    Good luck, hope it works. :)
     
  13. mildot

    mildot Member

    DVD Burn "Good to Go"

    Well what can I say it worked!!. Thanks for the help. This software is some of the first I have purchased and I have to say that I am quite pleased with it. The forum is a GREAT place to find out and resolve problems, in my case the firmware issue. I hope that down the line I can offer any help to fellow SlySoft troops. Thanks again. Well done and you deserve a pat on the back!!
     
  14. DetroitBaseball

    DetroitBaseball Well-Known Member

    Thank you for responding quickly with the appropriate information. I'm glad we could get this resolved. Enjoy your new products. Take care.