clone bd 3d

Discussion in 'CloneBD' started by czappiotr, Mar 13, 2018.

  1. czappiotr

    czappiotr Member

    Hello
    will clone bd support 3D movies?
    I want to rip a 45gb film for a BD-R 25gb disc
    and will I have a 3D movie on a recorded disc?
    I did it on the trial version and the movie was not in 3D only in 2D, and I absolutely need a 3D version
     
  2. Ch3vr0n

    Ch3vr0n Translator NL & Mod

    3d disc to disc mode is on the to do list. 3d to portable file is already supported. In the meantime, I myself use Bd-rebuilder until then. And it's free, available at doom9.org

    Sent from my Nexus 6P with Tapatalk
     
  3. czappiotr

    czappiotr Member

    I do not speak English and I translate it through Google and I did not understand it a bit
    does it mean that I will copy this 25gb 3D album with 45 gb files?
    please answer yes or no

    my files are all in iso format and bdrebuilder must have a bdmv folder and iso bdrebuilder can not see, does not show
     
  4. czappiotr

    czappiotr Member

    I tried by poweriso but I was compressing the iso file from 32 gb to 29.90 and this is not enough for 30-48 gb compression - bd-r 25gb
     
  5. Ch3vr0n

    Ch3vr0n Translator NL & Mod

    Bd-rebuilder can compress bd50 3d to bd25 3d yes, but not as fast as CloneBD can.

    Bd-rebuilder works with iso's just fine, you just need to mount them first in something like Elaborate Bytes' their 'virtual clone drive'. Available for free on the RedFox download page.

    Sent from my Nexus 6P with Tapatalk
     
  6. czappiotr

    czappiotr Member

    Oh, I understand - thanks
    there must be a virtual clone to make sure the rebuilder can see the iso file
    and how many hours does this conversion last 45 giga has a i5 4440cpu compiler. 3.10 ghz 8 frames

    that is, clonebd will also compress a 45gb 3D movie into 25gb 3D
    YES ?
     
  7. Ch3vr0n

    Ch3vr0n Translator NL & Mod

    There's no way to tell how long it will take. There's too much variables. Where the iso is stored (HDD or SSD), what the target drive is (SSD or HDD, same or different drive...), how powerful the CPU is, is it doing other tasks, is the CPU overclocked or not, how much ram is available...

    Only by trying will you find out, and as I said twice now, yes bdrb will do 3d double layer (bd50) to single layer (bd25)

    Sent from my Nexus 6P with Tapatalk
     
  8. kufo

    kufo Well-Known Member

    @czappiotr
    BDrebuilder uses FRIM for 3D sources. I did many films and i can tell you that it will be a speed about 16fps on your machine. Since BDrebuilder shows you the real runtime of the disc, you can already imagine that.In the process, the program shows you the exact processing time.
     
  9. czappiotr

    czappiotr Member

    please forgive my English, translate myself through translator google
    I counted very heavily on CloneBd that I am going to burn a blu-ray 3D to 25gb from an ISO file, and here zonk, CloneBd does not have this option 3D except mkv conversion, only ordinary 2D, but you write that this program will change the rebuilder from 45 gb to 23gb and will be surely blu-ray 3D the same as 45GB? only on a 25GB disc
    I installed virtual clone and bd the rebuilder already sees the iso file, I just want to convert everything, the entire iso file without any removal anything and only reduce the weight of the movie to 23GB
    is it known when the blu-ray 3D format in cloneBD will already be supported? so that you can burn to a disc and it was in 3D version after compression to 25gb?
     
  10. Ch3vr0n

    Ch3vr0n Translator NL & Mod

    Nowhere on the product page does it state 3d disc to disc backup was supported.

    The only reference to 3d is:

    'Convert your 3D Blu-ray to .mkv...'

    if you purchased it purely for 3d disc to disc back-ups ten tot either did not read the product description good enough or you were misinformed.

    Yes the bd-rebuilder output will be 3d. I use it myself frequently, specifically for that very purpose. Full disc 3d backup to bd25.

    Works perfectly in my standalone players. And no, it's not known when CloneBD will have that support. Elby doesn't do ETA'S, it'll be supported when it gets added. Not sooner.

    Sent from my Nexus 6P with Tapatalk
     
    kufo likes this.
  11. czappiotr

    czappiotr Member

    Hello
    I am asking for help, I started working on a bd rebuilder, I set it up for a bd-25 computer worked 3 minutes and the file which was supposed to be 22.5 gb has 1.22 gb ???
    what's going on, the program stopped

    ----------------------
    [03-14-18] BD Rebuilder v0.50.25
    [08:18:19] Source: BD_VIDEO
    - Input BD size: 35,55 GB
    - Approximate total content: [01:43:13.186]
    - Target BD size: 22,95 GB
    - Windows Version: 6.1 [7601]
    - Quality: Good (Very Fast), ABR
    - MVC 3D Output Mode enabled
    - Decoding/Frame serving: FRIMDecode
    - Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
    [08:18:19] PHASE ONE, Encoding
    - [08:18:19] Processing: VID_00000 (1 of 1)
    - [08:18:19] Extracting A/V streams [VID_00000]
    - [08:23:40] Reencoding video [VID_00000]
    - Source Video: MPEG-4 (AVC), 1920x1080
    - Rate/Length: 23,976fps, 148 488 frames
    - Bitrate: 27 745 Kbs
    - Using FRIMEncoder for MVC encoding
    - [08:23:40] Reencoding: VID_00000, Pass 1 of 1
    [08:23:41] - Failed video encode, aborted
    ----------------------
    [03-14-18] BD Rebuilder v0.50.25
    [08:24:02] Source: BD_VIDEO
    - Input BD size: 35,55 GB
    - Approximate total content: [01:43:13.186]
    - Target BD size: 22,95 GB
    - Windows Version: 6.1 [7601]
    - Quality: Good (Very Fast), ABR
    - MVC 3D Output Mode enabled
    - Decoding/Frame serving: FRIMDecode
    - Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
    - Encoding cancelled.
    ----------------------
    [03-14-18] BD Rebuilder v0.50.25
    [08:28:09] Source: BD_VIDEO
    - Input BD size: 35,55 GB
    - Approximate total content: [01:43:13.186]
    - Target BD size: 22,95 GB
    - Windows Version: 6.1 [7601]
    - Quality: Good (Very Fast), ABR
    - MVC 3D Output Mode enabled
    - Decoding/Frame serving: FRIMDecode
    - Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
    - Resuming from previously started job.
    [08:30:22] PHASE ONE, Encoding
    - [08:30:22] Processing: VID_00000 (1 of 1)
    - [08:30:22] Reencoding video [VID_00000]
    - Source Video: MPEG-4 (AVC), 1920x1080
    - Rate/Length: 23,976fps, 148 488 frames
    - Bitrate: 27 745 Kbs
    - Using FRIMEncoder for MVC encoding
    - [08:30:22] Reencoding: VID_00000, Pass 1 of 1
    [08:30:23] - Failed video encode, aborted
    ----------------------
    [03-14-18] BD Rebuilder v0.50.25
    [08:30:46] Source: BD_VIDEO
    - Input BD size: 35,55 GB
    - Approximate total content: [01:43:13.186]
    - Target BD size: 22,95 GB
    - Windows Version: 6.1 [7601]
    - Quality: Good (Very Fast), ABR
    - MVC 3D Output Mode enabled
    - Decoding/Frame serving: FRIMDecode
    - Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
    - Resuming from previously started job.
    [08:30:48] PHASE ONE, Encoding
    - [08:30:48] Processing: VID_00000 (1 of 1)
    - [08:30:48] Reencoding video [VID_00000]
    - Source Video: MPEG-4 (AVC), 1920x1080
    - Rate/Length: 23,976fps, 148 488 frames
    - Bitrate: 27 745 Kbs
    - Using FRIMEncoder for MVC encoding
    - [08:30:48] Reencoding: VID_00000, Pass 1 of 1
    [08:30:48] - Failed video encode, aborted

    [03-14-18] Checking System Settings
    - BD-Rebuilder v0.50.25
    - Windows Version: 6.1 [7601]
    - Working Path Free Space: 67,09GB
    - AVISYNTH Version: 2.5.8.0, Ok
    - LAVFILTERS: Ok
    - AnyDVD settings check: Ok.
    - X264: Ok
    - AFTEN: Ok
    - FAAC: Ok
    - MP4BOX: Ok
    - WAVI: Ok
    - TSMUXER: Ok
    - FRIMEncode: Ok
    - FRIMDecode: Ok
    [03-14-18] Systems Settings Check complete



    current progress - 100%
    overall progress - 0%
     
    Last edited: Mar 14, 2018
  12. Ch3vr0n

    Ch3vr0n Translator NL & Mod

    You'll have to ask support for bdrb at the bdrb debug topic sorry. This isn't the place for it.

    Sent from my Nexus 6P with Tapatalk