CCS Protection Issue

Discussion in 'AnyDVD HD (DVD issues)' started by mongoose, Jun 21, 2007.

  1. mongoose

    mongoose Member

    My wie has just bought 'Darling Buds Of May' and am attempting to make backup discs. When I put the disks (any of them) in the drive, the 'scanning' balloon appears, but doesn't go away. CloneDVD puts up a message about CCS protection and won't go any further.

    If I open up AnyDVD, the status tab tells me that there is no disk in the drive.
    Windows Explorer also doesn't think there is a disk in the drive.

    When I press the eject button on the drive, the status window briefly displays the normal sort of disk information I would expect to see. (It disappears when the disk ejects).

    If I exit AnyDVD before inserting the disk, Windows explorer detects it normally and I can drill down to the VIDEO_TS and AUDIO_TS directories and view their contents.

    Is this a new encryption, or is there something I'm doing/not doing?
     
  2. Webslinger

    Webslinger Retired Moderator

    Last edited: Jun 21, 2007
  3. mongoose

    mongoose Member

    I've done all those steps, problem still the same. I even tried a couple of different computers we have, all do the same.

    On the main one I usually use, the values are:
    LowerFilters: AnyDVD ElbyDelay
    UpperFilters: GEARAspiWDM
     
  4. Webslinger

    Webslinger Retired Moderator

  5. James

    James Redfox Development Team Staff Member

    What port driver (IDE/SATA) driver do you use? One from the chipset / mainboard manufacturer? Id yes, try the Windows drivers instead.
     
  6. mongoose

    mongoose Member

    OK, What I've done...
    1. Installed Anydvd 6.1.6.4 beta - No change
    2. Run the uninstaller - reported AlphaDisc not installed
    3. Answers to Questions:
    2 - Packet software - None installed
    3(a) Anydvd 6.1.6.4
    (b) Burning software is CloneDVD2 v2.9.0.9
    (c) No other burning software installed
    5(a) Brand - Toshiba
    (b) Model - DVD-ROM/R/RW SD-R6112
    (c) was 1031, upgraded to 1033 using latest upgrade available from toshiba website
    8 When the disc is inserted, the little red fox's "scanning" balloon appears and doesn't go away (I've waited up to 10 minutes). The status screen shows "No Disc is present in Drive D:!" for the whole time. However, when I press the eject button, the status screen briefly shows the information contained in the "buds-jpg.zip" attachment, then the disc ejects and the status returns to " No Disc is present". ("buds.zip" attachment is a zip of a video recording of this happening)
    4. The IFO files are in the Darling_Buds_Of_May_UK.zip attachment. I will also mail to slysoft support.

    Thanks
     

    Attached Files:

  7. Webslinger

    Webslinger Retired Moderator

  8. mongoose

    mongoose Member

    Yes, zip is a jpg of my Hardware setup.
     

    Attached Files:

  9. oldjoe

    oldjoe Well-Known Member

    Sounds a lot like a failed Toshiba DVDRW.
     
  10. mongoose

    mongoose Member

    Yes, that was what i was beginning to suspect, but I have tried the discs in 4 different computers, they all do exactly the same as my usual machine....
     
  11. mongoose

    mongoose Member

    I have upgraded to v6.1.6.5 of AnyDVD and am still getting this problem.