Can't rip 30 Days of Night either

Discussion in 'AnyDVD HD (DVD issues)' started by FictionalJoe, Feb 27, 2008.

  1. FictionalJoe

    FictionalJoe New Member

    Simlar probem as OP - here's the detail...

    (1) AnyDVD enabled for source drive
    (2) I click "Rip Video DVD to Harddisk..."
    (3) Rip reaches 50% status and stops, then I get the following error dialogue:
    "FileIO 3 VTS_01_4.VOB 512057344 321536"
    (4) Only option is to Abort and either delete or retain the partial files that were created

    Any ideas?
  2. Chapman Photography

    Chapman Photography Well-Known Member

    I just backed it up fine, it might be a bad disc, have you tried a diffrent one? Are you having problems with all disc or just this one?
  3. Webslinger

    Webslinger Retired Moderator


    Do not post in other people's troubleshooting threads please unless you wish to assist them. click and read fully. Thank you.

    1. a) Ensure Anydvd is running.
    b) Put the problematic original disc in your optical drive/reader. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload

    2. Download Nero cd-dvd speed. It's a free program. With Anydvd running in the background, select the tab labeled "scandisc". Select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your disc is (probably) bad and needs to be exchanged--even if it plays fine (or your optical drive could be slowly dying).
    Last edited: Feb 27, 2008
  4. FictionalJoe

    FictionalJoe New Member


    Nice diagnosis - running Nero speed scan now and it hit damaged and bad 'sectors' about 50% of the way through the scan.

    Guess I have to exchange the disc...glad I found out now before the return/exchange policy expired.

    As an aside, would these errors normally show up during playback of the original disc or will it just depend on where they are (like in the bonus material, etc vs. the movie)? I ask becasue we started watching it last night but had to stop before we got halfway through - we were going to resume tonight but does it make sense to wait until I get a new copy?

    Anyway, thanks for the help.
  5. Webslinger

    Webslinger Retired Moderator

    Not necessarily. Playing a disc is never a good test to see whether the disc is actually defective in some manner. The process used for copying a disc and playback are different, and standalone players also operate in a different manner. In many cases a defective disc may still play fine in a standalone dvd player.

    But the problem may also be that you have something installed on your system that is interfering with other programs (including Anydvd). Unless you upload the .zip file, I won't be able to check.
  6. FictionalJoe

    FictionalJoe New Member

    Sorry - thought maybe the file was a moot point.

    Attached Files:

  7. Webslinger

    Webslinger Retired Moderator

    When I ask for something, I always need that information for a reason.

    Typically that's installed by Pinnacle Studio (and possibly Windvd)

    James says that filter can cause problems: click

    i) Create a backup of your registry
    ii) Download imgburn. It's a free program:
    (it's also an excellent program imo)
    iii)Go to "Tools"-->"Filter Drive Load Order"
    iv) Select "Iviaspi"; select "remove selected filter". Then click "ok", and reboot.

    The program(s) that installed those filters will no longer work properly.

    Here are a couple of other things to do as well:

    1. Visit your burner's website, and update your burner's firmware if possible.
    If you don't know how to go about doing this, visit

    2. You can try reducing your drive's read speed
    Last edited: Feb 27, 2008