Can't Copy "The Golden Compass"

Discussion in 'AnyDVD HD (DVD issues)' started by ROBUSA, Apr 30, 2008.

  1. ROBUSA

    ROBUSA New Member

    Thanks for the help.

    Rob
     

    Attached Files:

  2. Webslinger

    Webslinger Retired Moderator

    In the future, please at least do 7B, so I'm not guessing what your problem is.

    Follow these steps in the order they are listed:


    1.
    i. Right click the fox on your toolbar. Exit Anydvd
    ii. Click start. Right click on "My computer"--->select "properties".
    iii.Click on the 'Hardware' tab--->click the 'device manager' button.
    iv. Open the dvd/cdrom branch---> right click on your optical drive
    v. Click "properties".
    vi. You should have a region tab. From there you can select a region.
    vii. Select the region that you're in
    viii. Start Anydvd

    Nero's Incd is packet writing software, which interferes with a lot of programs including Slysoft's. If you want drag-and-drop functionality, use dvd-ram instead, which is more stable.

    Typically installed by Arcsoft Photo Impressions. That filter also causes a lot of problems.

    Asapiw2k.sys - Used by Pinnacle Studio 9 by Pinnacle systems or VOB Computersysteme GMBH

    That filter may cause conflicts with Anydvd

    2.
    i) Create a backup of your registry
    ii) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)
    iii) Go to Tools > Filter Driver Load Order. Select "ASAPIW2k". Click "Remove Selected Filter". Select "InCDPass". Click "Remove Selected Filter". Select "incdrm". Click "Remove Selected Filter. Select "Afc". Click "Removed Selected Filter". Click "ok".
    iv) Reboot

    Keep in mind the programs that installed those filters will no longer function properly

    3. Click the red fox icon on your toolbar. Click "default". Click "ok".

    4. If you use DVDShrink or programs that generally can't handle structural protections, right-click on the fox icon on your toolbar and select "Rip video-dvd to Hard Disk". Choose your source and destination paths. Click "Copy", and wait for Anydvd ripper to finish. You can then import that rip into whatever program you want. This is an important step if the original disc contains structural protection.

    click http://forum.slysoft.com/showthread.php?t=3992 and read fully

    You don't need to do this if you own Clonedvd or are planning to make a backup with Clonecd.


    5. Use Clonedvd 2.9.1.7: click http://static.slysoft.com/SetupCloneDVD2917.exe

    6. Follow the steps from this link in order: click http://forum.slysoft.com/showthread.php?t=476 (follow them step by step)

    If you're using +R DL blank discs, I recommend using Clonecd: click http://forum.slysoft.com/showthread.php?t=327


    7. If you still have problems, then . . .

    A)
    a) Ensure Anydvd is running.
    b) Put the problematic original movie dvd in your burner. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG] (in other words, look for the paperclip after clicking "quote" or when creating a new thread)
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload"
    n) Close the window. When you submit reply, or submit a new thread, the .zip file will be attached automatically for us to take a look at


    B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?


    C) Click http://forum.slysoft.com/showthread.php?t=5091 to see if your question has already been answered
     
    Last edited: Apr 30, 2008
  3. ROBUSA

    ROBUSA New Member

    &B Instructions Complied with below...

    Within the Clone DVD2 Error Box is:

    "Creation of DVD Files was not successful.

    unexpected error.

    If you are confident that this error should not happen, please check for newer version of Clone DVD2 at http://wwwelby.com I have the latest version]
    If the error persists, please send the following information to....

    1. The current log ...right mouse button in the Log Window to save it....
    2. [optional) The title and region code of the source DVD The Golden Compass Region 1
    3. The IFO Files of the source DVD"
     
  4. Webslinger

    Webslinger Retired Moderator

    Okay, follows the steps in the order I listed them in my original reply (you can ignore step 4).
     
  5. ROBUSA

    ROBUSA New Member

    Also...

    Clone DVD, ANY DVD, Cyberlink Power DVD

    No other programs in use.
     
  6. ROBUSA

    ROBUSA New Member

    Okay...will do Wednesday...... I have to go to work. Thank you....I'll keep you posted.
     
  7. lostinlodos

    lostinlodos Well-Known Member

    The video ID code uses <<, :, and >>. It appears that the AnyDVD ripper can't handle it; much like the issue with the : in 3:10 to Yuma.
    Run AnyDVD in the background and then drag-n-drop the files. Plays back fine that way, and burns too!
     
  8. Webslinger

    Webslinger Retired Moderator

    No. Anydvd ripper handles this disc perfectly fine, and in fact, that's what you should be using with this title if you use Shrink:
    http://forum.slysoft.com/showpost.php?p=107061&postcount=1
     
    Last edited: Apr 30, 2008
  9. DrinkLyeAndDie

    DrinkLyeAndDie Retired Moderator

    I'm not sure where you came up with this information but it's absolutely wrong.

    Why go to the extra trouble?

    Back when Blades of Glory was released there was an issue with the volume name being <BLADES_OF_GLORY> but that was fixed. Colons also do not cause a problem since 3:10 to Yuma can most certainly be ripped with the AnyDVD ripper.

    The only existing problem with volume names and the AnyDVD ripper, at present and that has been confirmed, is a volume name containing a question mark.

    The AnyDVD ripper has no issues whatsoever with handling the volume name for The Golden Compass.

    Below are some images...

    The Golden Compass completed successfully using the AnyDVD ripper. The AnyDVD ripper removed the less than and the greater than signs.

    [​IMG]

    Below is a disc that I created. The volume name was made to be <EX:pERIMENT>. The AnyDVD ripper removed the less than and greater than signs and replaced the colon with an underscore:

    [​IMG]

    Below is an image of how the volume names of the two discs show up with AnyDVD disabled:

    [​IMG]
     
    Last edited: May 1, 2008
  10. ripmf666

    ripmf666 New Member

    I just copied this same movie last night put it in and walked away and copied fine
     
  11. linx05

    linx05 Well-Known Member

    The <> was put there to halt RipIt4Me. AnyDVD has no problems with it.