Burns failing/Clonedvd hanging at 99-100%? Read this

Discussion in 'CloneDVD' started by Webslinger, May 4, 2007.

Thread Status:
Not open for further replies.
  1. Webslinger

    Webslinger Retired Moderator

    Clonedvd hanging at 99-100%? Read this

    1. Iolo Antivirus with System Mechanic issue

    source http://forum.slysoft.com/showthread.php?t=4027

    It seems reasonable to suspect other Antivirus programs might interfere as well.
    Might as well add Avira Antivir Guard to the list: http://forum.slysoft.com/showthread.php?t=6943

    2. Disable the .wav sound that plays at the end of the burn

    source http://forum.slysoft.com/showpost.php?p=12096&postcount=8

    3. Try a custom size of 4300 if you're using regular single layer blank media

    Try setting a custom size of 4300 near the quality bar in Clonedvd (but if you're using good media, such as Taiyo Yuden Premium, Verbatim, Maxell Plus, or Maxell Broadcast Quality, you shouldn't have to) if you're using regular single layer dvd-5 (4.7GB) discs. Bad burn quality is notorious around the end of discs. Using a custom disc size of 4300 ensures you won't be burning to the end.

    4. Click http://forum.slysoft.com/showpost.php?p=63749&postcount=12 to see what TBPirate did to resolve his problem.

    Other things to try that may help include:

    A. Update your burner's firmware (if available)
    http://forum.slysoft.com/showthread.php?t=18731

    B. Use good quality media (Memorex, Ritek, Princo, Fuji (not made in Japan), TDK from Costco, and general Maxell that you can find in most stores (not made in Japan) are not good quality media. Are you using inferior blank media? If you're not using Taiyo Yuden Premium, Verbatim Datalife Plus, Maxell Plus, or Maxell Broadcast Quality, then chances are the answer is yes.
    If you use poor quality blank media, then you should expect problems.


    C. Try lowering your burn speed (not below 4x; if you have a 16x burner and 16x rated media try writing to it at 12x instead of 16x; an 8x burn speed on 16x rated media wouldn't be a bad idea either)

    D. Avoid sticker labels (they tend to cause problems)

    E. Try setting a custom size of 4300 in Clonedvd (but if you're using good media, you shouldn't have to) if you're using regular single layer dvd-5 (4.7GB) discs.



    Bad burn quality is notorious around the end of discs (see step E)
    and also at layer breaks when using low quality DL media (use Verbatim +R DL media made in Singapore or MAM-A 8x +R DL, and change the booktype to "dvd-rom")



    read http://forum.slysoft.com/showthread.php?t=476 fully please
     
    Last edited: Jan 17, 2009
Thread Status:
Not open for further replies.