burn speed with clonebd

Discussion in 'CloneBD' started by Bubbator, Mar 1, 2017.

Tags:
  1. Bubbator

    Bubbator Well-Known Member

    I can't find any threads on this.
    I get 8000 kbs @ 4x or maximum burn speed and 11500 at 6x speed. Aren't these numbers closer to 2x and 3x? Or am I just mixed up on my b's and B's?
    What speeds are you all getting?
    Thankss,
    B
     
  2. Ch3vr0n

    Ch3vr0n Translator NL & Mod

    There's a setting in CloneBD to limit to 6x. You can disable that one. Everything else depends on which speeds the discs can be burned at and how fast your drive supports burning them. That's out of CloneBD's hands.

    Sent from my Nexus 6P with Tapatalk.
     
  3. Pete

    Pete Forum Admin Staff Member

    They are and it is strange. I get 9000 at 2x.
     
  4. Bubbator

    Bubbator Well-Known Member

    Thanks, Ch3vr0n, I am using Verbatim data life per your recommendation. What rate do you get?
    B
    Thanks, Pete. Those numbers are with data life. When I was using optical quantum I got 4x = 7500 or occasionally less, and 6x was a no-go.
    In the BDrebuilder/Imgburn days I got the expected speeds or more without major problems. Of course NO problems with CBD other than an hour to burn.
    B
     
  5. Ch3vr0n

    Ch3vr0n Translator NL & Mod

    Burning I do with imgburn, always. I burn at full speed. Near the end I reach 10-12x. I'll grab a look the next time I burn at the actual bit rate

    Sent from my Nexus 6P with Tapatalk.
     
  6. Bubbator

    Bubbator Well-Known Member

    Ahhh! Thanks!
    B