Bluray faulty images when ripping to iso

Discussion in 'AnyDVD HD (Blu-ray issues)' started by blank, Feb 8, 2018.

  1. blank

    blank Well-Known Member

    Something dosen't work when ripping to image with AnyDVD 8.2.2.0:

    AnyDVD writes the image without complainnig errors or anything but when I try to convert them with CloneBD CBD reports errors. This discs used to work with older versions on the same setup.

    Ripping with AnyDVD disabled and using the encrypted image works ...

    Forum1.jpg Forum2.jpg Forum3.jpg
     
  2. Ch3vr0n

    Ch3vr0n Translator NL & Mod

    That's not AnyDVD, that's CloneBD

    Sent from my Nexus 6P with Tapatalk
     
  3. blank

    blank Well-Known Member

    That would mean CloneBD 1.9.0.x is broken or what - I realy don't know how to handel this error messages.:cry:

    The second rip was converted without Videoencoding.
     
  4. James

    James Redfox Development Team Staff Member

    Does it work, if you don't rip at all? Just try to convert from the original disc.
     
  5. blank

    blank Well-Known Member

    Will try. The drive I use is connected to USB 2 and dosen't read blurays "good". I suspect CloneBD will stop.
     
  6. Pete

    Pete Forum Admin Staff Member

    Nope.
    It's AnyDVD - CloneBD just reports bad data.

    When using the drive directly, CloneBD will retry and reread if broken data is detected and in most cases fix the problem that way.
    If you create an ISO first - the ISO is bad and will remain bad.
     
  7. blank

    blank Well-Known Member

    Will do so next.

    Today I ripped to image with anydvd and unchecked sparse file -> result it worked with a disc that failed yesterday
     

    Attached Files:

  8. James

    James Redfox Development Team Staff Member

    Interesting. I am looking at the code in AnyDVD and I can't find anything wrong. Not to mention, I can't reproduce this problem.
    What was the target disk / filesystem, where AnyDVD saved failing sparse the image? Local NTFS disc? Remote PC? NAS?
     
  9. blank

    blank Well-Known Member

    I copied to an usb3 hdd (ntfs) / Windows 10 1709
     
  10. James

    James Redfox Development Team Staff Member

    Very odd. Maybe I should remove the sparse function. It isn't really useful anyway.
     
  11. Ch3vr0n

    Ch3vr0n Translator NL & Mod

    You at least have my vote on that one ^^. I only rip the "normal" way :) never even tried the sparse method
     
    Aeneas72 likes this.
  12. Aeneas72

    Aeneas72 Well-Known Member

    Neither did I!
     
  13. DrinkLyeAndDie

    DrinkLyeAndDie Retired Moderator

    I always use the sparse option. Never run into any issues with it. o_O
     
  14. blank

    blank Well-Known Member

    Yes - perhaps add a warning in the gui (can be problematic) ...

    Either the drive I use or sparse file cause the errors here - will test a few blurays to normal image the next week.