Blood Diamond [Region 4]

Discussion in 'CloneDVD' started by Accolyte, May 30, 2007.

  1. Accolyte

    Accolyte New Member

    DVD size appears as 7.82 Gb
    -----------------------------


    AnyDVD Status: ------------>

    Summary for drive D: (AnyDVD 6.1.5.5)
    HL-DT-ST DVDRAM GSA-4163B
    Drive (Hardware) Region: 4

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 2052448 sectors (4008 MBytes)
    Total size: 4104889 sectors (8017 MBytes)

    Video DVD (or CD) label: BLOOD_DIAMOND
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1 4!

    Found & removed RCE protection!
    DVD structure appears to be correct.
    Structural copy protection not found.
    Autorun not found on Video DVD.
    Bad sector protection not found.
    Emulating RPC-2 drive with region 4!
    -----------------------------------------

    CloneDVD [2.9.0.8] Error Message: ----------->

    1.- At the "Audio & Sub. Config." tab, while scanning, sometimes gets stuck at 60%.

    2.-When project start, almost immediately:-------->

    File 1 D:/VIDEO_TS/VTS_01_5.VOB 23 TCSectorReader
    --> Block 324344 Cyclic Red. error
    -----------------------------------------


    DVD is not scratched, and plays the entire movie OK (English, spanish subs.)
    Any idea how can I backup my DVD?
    Is this an CloneDVD issue, or AnyDVD?
     
  2. customshopkv1

    customshopkv1 Well-Known Member

    Still can be a bad disc even if it plays ok. Try a different movie and see if you can back it up.
     
  3. Webslinger

    Webslinger Retired Moderator

    You have a bad original disc.


    Download Nero cd-dvd speed. It's a free program. Select the tab labeled "scandisc". Select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your disc is bad and needs to be exchanged.
     
  4. Accolyte

    Accolyte New Member

    Still not working

    Well, after trying with another copy of the DVD [R4], same errors appear (AnyDVD 6.1.6.0 / CloneDVD 2.9.0.9)

    1.- At 60% of scan, it stops (sometimes). Rip start error: "File 1 D:/VIDEO_TS/VTS_01_5.VOB 23 TCSectorReader"

    2.- "Nero CD-DVD Speed" keeps returning error.

    3.- I tried alternate methods using other software; but again, while ripping, at 60% the "preview" stoped (continued ripping), finished rip, then burn (removing everything except 5.1 english content, spanish subs, no compression). While playing the DVD, at the end of chapter 17, showed a few frames of other chapters then jumped to chapter 27. Can't read chapters 18-26.

    Please, let me know how to backup this DVD.
    Thanks in advance.
     
    Last edited: Jun 6, 2007
  5. customshopkv1

    customshopkv1 Well-Known Member

    Bad disc part 2
     
  6. Webslinger

    Webslinger Retired Moderator

    The disc is bad or your drive is slowly dying (or a combination thereof). Anyway, if cd-dvd speed is reporting read errors to you, then you can forget backing up that disc until you get one that doesn't report read errors.