blades of glory

Discussion in 'AnyDVD HD (DVD issues)' started by knucklescw, Aug 17, 2007.

Thread Status:
Not open for further replies.
  1. knucklescw

    knucklescw Member

    Last edited by a moderator: Sep 4, 2007
  2. DetroitBaseball

    DetroitBaseball Well-Known Member

    It isn't supposed to be released until August 28th.
     
  3. Webslinger

    Webslinger Retired Moderator

  4. knucklescw

    knucklescw Member

    i forgot what is said, it didn't crack the code i know. i use dvd shrink and it stop analyzing it at 84%. did i get the dvd before slysoft did?
     
  5. Webslinger

    Webslinger Retired Moderator

    Last edited: Aug 17, 2007
  6. knucklescw

    knucklescw Member

    i let my nephew borrow it. i'll post the ifo's when i get it back.
     
    Last edited: Aug 17, 2007
  7. sheep

    sheep Well-Known Member

    It is reported that it works with r4me and anydvd running. Don't know if it's true.
    Another solution is using dvdfab, as i have heard some succesful reports too.
     
    Last edited: Aug 17, 2007
  8. linx05

    linx05 Well-Known Member

    That thread is here. Region 1 apparently.
     
  9. sheep

    sheep Well-Known Member

    Yes that is what I meant. Wasn't sure if I can post a link to cdf here.
     
  10. sparkym5

    sparkym5 Well-Known Member

    Copied Blades Of Glory UK Region 2 using latest AnyDvd 6170 and CloneDvd 2912 no problems.
     
  11. Webslinger

    Webslinger Retired Moderator

  12. Zamphire

    Zamphire Member

    I've already sent in the IFOs and all that good stuff to Slysoft last night. Here's the stuff for you guys.


    Summary for drive D: (AnyDVD 6.1.7.0)
    TSSTCORP CD/DVDW SH-S183L SB01 1117
    Drive (Hardware) Region: 0 (not set!)

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 2084928 sectors (4072 MBytes)
    Total size: 3721520 sectors (7268 MBytes)

    Video DVD (or CD) label: <BLADES_OF_GLORY_16X9>
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1 4!

    RCE protection not found.
    DVD structure appears to be correct.
    Found & removed structural copy protection (Arccos, Puppetlock)!
    Found & removed bogus title set!
    Autorun not found on Video DVD.
    Found & removed 11 bad sector protections!
    Emulating RPC-2 drive with region 1!
     
  13. Zamphire

    Zamphire Member

    And here's the IFOs.
     

    Attached Files:

  14. Webslinger

    Webslinger Retired Moderator

  15. RedFox 1

    RedFox 1 Super Moderator

    I cannot even try to see if there is a problem with the region 1 version cause they have not yet released this movie where I live. :disagree:
     
  16. Webslinger

    Webslinger Retired Moderator

    They have to be from the original disk--with anydvd disabled.
     
  17. James

    James Redfox Development Team Staff Member

    Thank you!
     
  18. sparkym5

    sparkym5 Well-Known Member

    Sorry Webslinger it's the first time I’ve had to do this, these are original IFO’s as requested with AnyDvd disabled and from the actual disc.
    I've ripped a full disc backup with nothing at all removed and also a movie only backup using AnyDvd 6170 and CloneDvd 2912, both were fine. I've also forwarded them to Slysoft.
     

    Attached Files:

  19. keepondl

    keepondl New Member

    Blades region 1 IFO

    CloneDVD 2.9.1.2 crashes at 98% with AnyDVD 6.1.7.0 running. The movie crashes at VTS_08_5.

    Hope this helps.
     

    Attached Files:

  20. Webslinger

    Webslinger Retired Moderator

    Edit: You may have to wait for the next Anydvd update.
     
    Last edited: Aug 23, 2007
Thread Status:
Not open for further replies.