Blades of Glory & Anydvd 6.1.8.4

Discussion in 'AnyDVD HD (DVD issues)' started by soxfan, Oct 14, 2007.

  1. soxfan

    soxfan New Member

    Blades of Glory should now work with 6.1.8.6 beta

    8)
    Summary for drive D: (AnyDVD 6.1.8.4)
    PHILIPS CDRW/DVD CDD5263 UH89 P0860SM45300387
    Drive (Hardware) Region: 1

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 2084928 sectors (4072 MBytes)
    Total size: 3721520 sectors (7268 MBytes)

    Video DVD (or CD) label: BLADES_OF_GLORY_16X9
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1 4!

    RCE protection not found.
    Found & removed structural copy protection!
    Found & removed invalid cell pieces!
    Found & removed bogus title set(s)!
    Autorun not found on Video DVD.
    Found & removed 10 potential bad sector protections!
    Emulating RPC-2 drive with region 1!

    9) unable to copy copy protected material (CSS)
    Using Clonedvd2 to copy disc

    10) see attached

    Webslinger's edit: This movie should now work with 6.1.8.6 beta.
     

    Attached Files:

    Last edited by a moderator: Oct 24, 2007
  2. Charlie

    Charlie Well-Known Member

    I am thinking you have a bad source disc there shouldn't be an issue with this title. What error(s) are you getting?
     
  3. Webslinger

    Webslinger Retired Moderator

    This suggests Anydvd isn't working properly on your system.


    1. Do you have Anydvd running in the background when you get that error message?

    2. When do you get that error message? Before or after Clonedvd begins ripping to the hard drive?

    3. Uninstall B's Recorder Gold

    - "from BHA/Ricoh as it was installed with the Ricoh EncryptEase format/engine and B's Recorder GOLD7" http://www.cdr-zone.com/forum/about4719.html

    Ensure cdrbsdrv no longer appears in your filters.

    Then Reboot

    You can check by doing this:

    a) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)

    b) Go to Tools > Filter Driver Load Order. Is cdrbsdrv.sys still listed? If not, good.

    4. i. For XP with ide burners
    Click this

    Do what it says to do if you have XP and an ide burner/optical drive.

    ii. For Vista with ide burners

    Go into device manager, and check to ensure you're using standard Microsoft ide busmaster drivers.

    Right click on your PCI IDE Bus Master controller, and remove it. Ensure that it also removes the driver for your DVD/CD rom. Reboot. Your system should find hardware. After your system is finished installing hardware, reboot again.

    click http://forum.slysoft.com/showpost.php?p=48880&postcount=20 to get a better idea of what I'm asking for if you're using Vista.
     
    Last edited: Oct 14, 2007
  4. soxfan

    soxfan New Member

    1) Yes, anydvd was running at the time. this has happened on 3 seperate computers all with the same version.
    2)the movie started ripping, got to 5%, then the error popped up.

    3) will try now, and let you know if that helped..didn't even know I had anything called B's recorder gold installed though....
     
  5. Webslinger

    Webslinger Retired Moderator


    Ensure you do steps 3 and 4 from what I listed previously.

    If you can't figure out what installed that filter, do this:

    1. Backup your registry.

    2. a) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)

    b) Go to Tools > Filter Driver Load Order.

    c) Select "cdrbsdrv.sys", and click "Remove selected filter."

    d) Reboot

    I also recommend disabling Daemon Tools, which you have running.
     
    Last edited: Oct 14, 2007
  6. SamuriHL

    SamuriHL Retired Moderator

    Something's not right here.

    This suggests it couldn't find the CSS key for titleset 1, which would be why you got the error. Please make sure you are using defaults in AnyDVD...go to settings and hit the default button. If that does not work, please set the AI Scanner to disabled, re-enable logging, and post that zip file. Thanks!
     
  7. James

    James Redfox Development Team Staff Member

    Yes, according to the log the CSS archive was enabled. It is possible, that CSS keys archived with older versions don't work well with 6.1.8.4
     
  8. SamuriHL

    SamuriHL Retired Moderator

    I missed that one. Darn. :) There's no reason to use the CSS archive anyway. Personally I never enable it.
     
  9. Webslinger

    Webslinger Retired Moderator

    O.k.

    @soxfan,

    1. Click the red fox icon on your toolbar.

    2. Click the "default" button". Click "ok".
     
  10. SamuriHL

    SamuriHL Retired Moderator

    Didn't I already tell him to do that last night? :D (Just giving you a hard time, as always. :) )
     
  11. Webslinger

    Webslinger Retired Moderator

    You expect me to read your posts? What do you think I am? A mod or something? :D
     
  12. SamuriHL

    SamuriHL Retired Moderator

    YIKES! No wonder I always get blamed for everything. :D :doh:
     
  13. Webslinger

    Webslinger Retired Moderator

    This stupid flu/cold I have won't go away. I'm sure that's your fault too. :p :D
     
  14. SamuriHL

    SamuriHL Retired Moderator

    Of course it is. :) And that sucks...you've had that a while now. :(
     
  15. Webslinger

    Webslinger Retired Moderator

    Yeah. I did read your post by the way. I just forgot what you wrote about using default settings. My bad . . .
     
  16. SamuriHL

    SamuriHL Retired Moderator

    No big deal. I was just giving you a hard time. I missed the CSS archive being active in the log. Once I saw that titleset 1 wasn't being decrypted properly I figured something wasn't set right and went for the default idea. This is a case that proves beyond a shadow of a doubt that the new info collection function is worth its weight in gold.
     
  17. GeoYano

    GeoYano New Member

    Help

    Same prob here 5%and the error disk copy protected. Details from clonedvd was- PE 18 TCE
     
  18. SamuriHL

    SamuriHL Retired Moderator

    And did you read through this thread? Do you have the CSS Archive turned on? Did you try resetting AnyDVD to defaults and try again? What version of AnyDVD are you running?
     
  19. Webslinger

    Webslinger Retired Moderator

  20. Webslinger

    Webslinger Retired Moderator

    Answer question 10 from this link: click http://forum.slysoft.com/showthread.php?t=321