BD rebuild audio error

Discussion in 'Third Party Products' started by barnburner, Apr 28, 2013.

  1. barnburner

    barnburner Well-Known Member

    I am trying to use BD rebuild for the first time and getting the error message, "Failed to retrieve audio, aborted."

    Here is the rest of the log file of what I see.


    [04/28/13] BD Rebuilder v0.43.06 (beta)
    [07:09:59] Source: THE_EAGLES_-_FAREWELL_1_TOUR_-_LIVE_FROM_MELBOURNE
    - Input BD size: 42.28 GB
    - Approximate total content: [02:56:55.630]
    - Target BD size: 22.95 GB
    - Windows Version: 6.2 [9200]
    - Auto Quality: Good (Very Fast), ABR
    - Decoding/Frame serving: DirectShow
    - Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
    [07:10:01] PHASE ONE, Encoding
    - [07:10:01] Processing: VID_00000 (1 of 2)
    - [07:10:01] Extracting A/V streams [VID_00000]
    - Error in attempt to extract audio/subs.
    -
    [07:10:01] - Failed to retrieve audio, aborted

    Anyone have a answer?
     
  2. Ch3vr0n

    Ch3vr0n Translator NL & Mod

  3. barnburner

    barnburner Well-Known Member

    This..?

    VERSION=0.43.0.6
    MODE=0
    ENCODE_QUALITY=0
    ONEPASS_ENCODING=2
    AUTO_QUALITY=1
    AUDIO_TO_KEEP=eng;
    SUBS_TO_KEEP=eng;
    SD_CONVERT=0
    OPEN_GOP=0
    RESIZE_1080=0
    DEINTERLACE=1
    SD_TO_1080=0
    CONVERT_WIDE=0
    DTS_REENCODE=0
    AC3_REENCODE=0
    AC3_640=1
    AC3_192=0
    KEEP_HD_AUDIO=0
    AVCHD=1
    REMOVE_WORKFILES=0
    MOVIE_ONLY_LOOP=1
    REMOVE_OUTPUT=0
    USE_FILTERS=0
    BDMV_CERT_ONLY=0
    USE_LAVF=0
    IVTC_PULLDOWN=0
    ASSUME_DVD_PAL=0
    UNMASK_CHAPTER=0
    COMPLETION_BEEP=0
    DGDECNV=0
    OUTPUT_3D=0
    AUDIO_TRACK_LIMIT=1
    SUBTITLE_TRACK_LIMIT=1
    CUSTOM_TARGET_SIZE=23500
    TARGET_SIZE=23500
    AUTO_BURN=0
    [Paths]
    SOURCE_PATH=C:\BLU-RAY MOVIES\THE EAGLES - FAREWELL 1 TOUR - LIVE FROM MELBOURNE\
     
  4. Adbear

    Adbear Well-Known Member

    Usual reason is you have a corrupt file and therefore it can't extract it. I'd suggest re-ripping the disc
     
  5. Ch3vr0n

    Ch3vr0n Translator NL & Mod

    no not that, that is the content from the ini file. Go to your workfolder and post the contents of the BD-REBUILDER.LOG file, then go to where you extracted the bdrb zipfile, run the file inspect.exe and post that log too
     
  6. barnburner

    barnburner Well-Known Member

    I have no idea what this is?

    Here is from the inspect file.

    - Windows Version: 6.2 [9200]
    - AVISYNTH Version: [2.5.8.0], Ok
    - HAALI Splitter: Not installed
    - FFDSHOW: [4507], not recommended version
    - FFDSHOW VC-1 set incorrectly: [0]
    - FFDSHOW MPEG2 set incorrectly: [0]
    - FFDSHOW AVC set to "libavcodec": Ok
    - AnyDVD settings check: Ok.
    - BD-RB vUNKNOWN, not current
     
  7. Ch3vr0n

    Ch3vr0n Translator NL & Mod

    There's your problem. You didnt set it up properly and you're using the wrong versions and have toolst not installed

    1) you don't have the HAALI splitter installed
    2) the FFDShow version you're using is not the correct one. You're not using the one from the 1st post in the BDRB thread
    3) FFDShow is not properly configured. VC1 codec handling is not configured and neither ins MPEG2 codec handling

    Follow the instructions from the thread i linked in post #2, and use ONLY the versions of the helper tools that are linked to in that same post.

    The reason your rebuild is failing is due to missing helper tools, incorrect versions and settings that are not even set.

    Working folder = WORKING path you set when you first started the software. In that working path there will be a file called bd-rebuilder.log that contains the discs you've processed and how. But that doesn't matter for the moment till you configure it properly