BD-R-SL:PHILIP-R04-000 (Auth Soft)

[mike_r]

Ich habe 25 x BD-R 4x bei www.as-burn.de gekauft. Der lieferung hat über 2 wochen gedauert (versandt erst 7 tage nach geldeingang). Der lieferung selbst war sehr staubig, aber soweit so gut. Leider ist diese angebot nicht mehr in laden, eventuell der alle letzte von keller?

Technische infos:

** INFO : Drive = HL-DT-ST BD-RE  BH10LS30 - [FW 1.00] - [ATAPI]
** INFO : Write Capabilities = BD-R BD-RE
** INFO : Write Capabilities = DVD+R DVD+R-DL DVD+RW
** INFO : Write Capabilities = DVD-R DVD-R-DL DVD-RW DVD-RAM
** INFO : Disc = [BD-R-SL:PHILIP-R04-000]
** INFO : Reference Speed : 1x BD = 4496 kBps = 3.25x DVD
** INFO : An Writeable Disc Is Recommended For Accurate Results
** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below
 
** INFO : GET PERFORMANCE Write Speed Descriptor(s)
Descriptor #1 = 35964 kBps ( 8.00x) - [CLV/Non-Pure CAV]
Descriptor #2 = 26973 kBps ( 6.00x) - [CLV/Non-Pure CAV]
Descriptor #3 = 17982 kBps ( 4.00x) - [CLV/Non-Pure CAV]
Descriptor #4 =  8991 kBps ( 2.00x) - [CLV/Non-Pure CAV]
 
** INFO : MODE SENSE Write Speed Descriptor(s) [Legacy Command]
** WARNING : MODE SENSE Is Obsolete And Not Always Properly Supported
Descriptor #1 = 35964 kBps ( 8.00x) - [CLV/Non-Pure CAV]
Descriptor #2 = 26973 kBps ( 6.00x) - [CLV/Non-Pure CAV]
Descriptor #3 = 17982 kBps ( 4.00x) - [CLV/Non-Pure CAV]
Descriptor #4 =  8991 kBps ( 2.00x) - [CLV/Non-Pure CAV]

 

[mike_r]

; //****************************************\\
;   ImgBurn Version 2.5.1.0 - Log
;   Monday, 26 April 2010, 19:08:53
; \\****************************************//
;
;
I 18:29:14 ImgBurn Version 2.5.1.0 started!
I 18:29:14 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)
I 18:29:14 Total Physical Memory: 12,573,816 KB  -  Available: 10,733,988 KB
W 18:29:14 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!
I 18:29:14 Initialising SPTI...
I 18:29:14 Searching for SCSI / ATAPI devices...
I 18:29:14 -> Drive 1 - Info: HL-DT-ST BD-RE  BH10LS30 1.00 (M:) (ATA)
I 18:29:14 -> Drive 2 - Info: HL-DT-ST DVDRAM GH22NS40 NL02 (L:) (ATA)
I 18:29:14 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (S:) (SCSI)
I 18:29:14 -> Drive 4 - Info: ELBY CLONEDRIVE 1.4 (T:) (SCSI)
I 18:29:14 -> Drive 5 - Info: ELBY CLONEDRIVE 1.4 (U:) (SCSI)
I 18:29:14 -> Drive 6 - Info: ELBY CLONEDRIVE 1.4 (V:) (SCSI)
I 18:29:14 -> Drive 7 - Info: ELBY CLONEDRIVE 1.4 (W:) (SCSI)
I 18:29:14 -> Drive 8 - Info: ELBY CLONEDRIVE 1.4 (X:) (SCSI)
I 18:29:14 -> Drive 9 - Info: ELBY CLONEDRIVE 1.4 (Z:) (SCSI)
I 18:29:14 -> Drive 10 - Info: ELBY CLONEDRIVE 1.4 (Y:) (SCSI)
I 18:29:14 Found 1 DVD±RW/RAM, 8 BD-ROM/HD DVD-ROMs and 1 BD-RE!
I 18:29:43 Operation Started!
I 18:29:43 Source File: E:\MIKES_ISO.iso
I 18:29:43 Source File Sectors: 11,250,400 (MODE1/2048)
I 18:29:43 Source File Size: 23,040,819,200 bytes
I 18:29:43 Source File Volume Identifier: MIKES_ISO
I 18:29:43 Source File Volume Set Identifier: 03740A88        MIKES_ISO
I 18:29:43 Source File Application Identifier: SonicScenaristBD
I 18:29:43 Source File Implementation Identifier: SonicScenaristBD
I 18:29:43 Source File File System(s): UDF (2.50)
I 18:29:43 Destination Device: [0:1:0] HL-DT-ST BD-RE  BH10LS30 1.00 (M:) (ATA)
[COLOR="Red"]I 18:29:43 Destination Media Type: BD-R (Disc ID: PHILIP-R04-00) (Speeds: 2x, 4x, 6x, 8x)[/COLOR]
I 18:29:43 Destination Media Sectors: 12,219,392
I 18:29:43 Write Mode: BD
I 18:29:43 Write Type: DAO
I 18:29:43 Write Speed: 4x
I 18:29:43 BD-R Verify Not Required: Yes
I 18:29:43 Link Size: Auto
I 18:29:43 Lock Volume: Yes
I 18:29:43 Test Mode: No
I 18:29:43 OPC: No
I 18:29:43 BURN-Proof: Enabled
I 18:29:43 Write Speed Successfully Set! - Effective: 17,982 KB/s (4x)
I 18:29:58 Filling Buffer... (40 MB)
I 18:29:59 Writing LeadIn...
I 18:29:59 Writing Session 1 of 1... (1 Track, LBA: 0 - 11250399)
I 18:30:00 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 11250399)
I 18:51:33 Synchronising Cache...
I 18:51:37 Closing Track...
I 18:51:38 Finalising Disc...
I 18:51:49 Exporting Graph Data...
I 18:51:49 Graph Data File: C:\Users\Mike\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.00_26-APRIL-2010_18-29_PHILIP-R04-00_4x.ibg
I 18:51:49 Export Successfully Completed!
I 18:51:49 Operation Successfully Completed! - Duration: 00:22:05
[COLOR="Red"]I 18:51:49 Average Write Rate: 17,402 KB/s (3.9x) - Maximum Write Rate: 18,576 KB/s (4.1x)[/COLOR]
I 18:51:49 Cycling Tray before Verify...
W 18:51:59 Waiting for device to become ready...
I 18:52:12 Device Ready!
I 18:52:14 Operation Started!
I 18:52:14 Source Device: [0:1:0] HL-DT-ST BD-RE  BH10LS30 1.00 (M:) (ATA)
I 18:52:14 Source Media Type: BD-R (Disc ID: PHILIP-R04-00) (Speeds: 2x, 4x, 6x, 8x)
I 18:52:14 Image File: E:\MIKES_ISO.iso
I 18:52:14 Image File Sectors: 11,250,400 (MODE1/2048)
I 18:52:14 Image File Size: 23,040,819,200 bytes
I 18:52:14 Image File Volume Identifier: MIKES_ISO
I 18:52:14 Image File Volume Set Identifier: 03740A88        MIKES_ISO
I 18:52:14 Image File Application Identifier: SonicScenaristBD
I 18:52:14 Image File Implementation Identifier: SonicScenaristBD
I 18:52:14 Image File File System(s): UDF (2.50)
I 18:52:14 Read Speed (Data/Audio): MAX / MAX
I 18:52:14 Verifying Session 1 of 1... (1 Track, LBA: 0 - 11250399)
I 18:52:14 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 11250399)
I 19:04:26 Exporting Graph Data...
I 19:04:26 Graph Data File: C:\Users\Mike\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.00_26-APRIL-2010_18-29_PHILIP-R04-00_4x.ibg
I 19:04:26 Export Successfully Completed!
I 19:04:26 Operation Successfully Completed! - Duration: 00:12:05
[COLOR="Red"]I 19:04:26 Average Verify Rate: 31,035 KB/s (6.9x) - Maximum Verify Rate: 44,750 KB/s (10.0x)[/COLOR]
I 19:08:53 Close Request Acknowledged
I 19:08:53 Closing Down...
I 19:08:53 Shutting down SPTI...
I 19:08:53 ImgBurn closed!

 

[GorillaBD]

Das ist der gleiche Mediacode wie die MediaRange 4x - Rohlinge.

Gute und sichere Scheiben, die z.B. BD-Video keinerlei Schwierigkeiten machen. Mein Plextor PX-B940 beschreibt die sogar bis 10x.


Greets
GorillaBD

 

[DJWESTY]

Das mit den Zwei Wochen ist aber merkwürdig.

Das hatte ich bei denen noch nie (Maximal 2-3 Tage).

Aber so wie ich die kenne, haben die momentan einfach keinen Bestand und die kommen bestimmt wieder. Ist bei denen andauernd so

 

[mike_r]

Hmm, erste 'untertasse':

; //****************************************\\
;   ImgBurn Version 2.5.1.0 - Log
;   Wednesday, 28 April 2010, 19:44:13
; \\****************************************//
;
;
I 19:12:39 ImgBurn Version 2.5.1.0 started!
I 19:12:39 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)
I 19:12:39 Total Physical Memory: 12,573,816 KB  -  Available: 10,615,364 KB
W 19:12:39 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!
I 19:12:39 Initialising SPTI...
I 19:12:39 Searching for SCSI / ATAPI devices...
I 19:12:39 -> Drive 1 - Info: HL-DT-ST BD-RE  BH10LS30 1.00 (M:) (ATA)
I 19:12:39 -> Drive 2 - Info: HL-DT-ST DVDRAM GH22NS40 NL02 (L:) (ATA)
I 19:12:39 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (S:) (SCSI)
I 19:12:39 -> Drive 4 - Info: ELBY CLONEDRIVE 1.4 (T:) (SCSI)
I 19:12:39 -> Drive 5 - Info: ELBY CLONEDRIVE 1.4 (U:) (SCSI)
I 19:12:39 -> Drive 6 - Info: ELBY CLONEDRIVE 1.4 (V:) (SCSI)
I 19:12:39 -> Drive 7 - Info: ELBY CLONEDRIVE 1.4 (W:) (SCSI)
I 19:12:39 -> Drive 8 - Info: ELBY CLONEDRIVE 1.4 (X:) (SCSI)
I 19:12:39 -> Drive 9 - Info: ELBY CLONEDRIVE 1.4 (Z:) (SCSI)
I 19:12:39 -> Drive 10 - Info: ELBY CLONEDRIVE 1.4 (Y:) (SCSI)
I 19:12:39 Found 1 DVD±RW/RAM, 8 BD-ROM/HD DVD-ROMs and 1 BD-RE!
I 19:13:22 Operation Started!
I 19:13:22 Building Image Tree...
I 19:13:27 Corrected file system selection for Blu-ray Video disc.
I 19:13:27 Corrected UDF revision selection for Blu-ray Video disc.
I 19:13:30 Calculating Totals...
I 19:13:30 Preparing Image...
I 19:13:30 Contents: 9 Files, 14 Folders
I 19:13:30 Content Type: BD Video
I 19:13:30 Data Type: MODE1/2048
I 19:13:30 File System(s): UDF (2.50)
I 19:13:30 Volume Label: MIKES_DISK
I 19:13:30 Size: 24,781,264,308 bytes
I 19:13:30 Sectors: 12,100,232
I 19:13:30 Image Size: 24,782,307,328 bytes
I 19:13:30 Image Sectors: 12,100,736
I 19:13:33 Operation Successfully Completed! - Duration: 00:00:11
I 19:13:33 Operation Started!
I 19:13:33 Source File: -==/\/[BUILD IMAGE]\/\==-
I 19:13:33 Source File Sectors: 12,100,736 (MODE1/2048)
I 19:13:33 Source File Size: 24,782,307,328 bytes
I 19:13:33 Source File Volume Identifier: MIKES_DISK
I 19:13:33 Source File Application Identifier: ImgBurn v2.5.1.0
I 19:13:33 Source File Implementation Identifier: ImgBurn
I 19:13:33 Source File File System(s): UDF (2.50)
I 19:13:33 Destination Device: [0:1:0] HL-DT-ST BD-RE  BH10LS30 1.00 (M:) (ATA)
[COLOR="Red"]I 19:13:33 Destination Media Type: BD-R (Disc ID: PHILIP-R04-00) (Speeds: 2x, 4x, 6x, 8x)[/COLOR]
I 19:13:33 Destination Media Sectors: 12,219,392
I 19:13:34 Write Mode: BD
I 19:13:34 Write Type: DAO
I 19:13:34 Write Speed: 4x
I 19:13:34 BD-R Verify Not Required: Yes
I 19:13:34 Link Size: Auto
I 19:13:34 Lock Volume: Yes
I 19:13:34 Test Mode: No
I 19:13:34 OPC: No
I 19:13:34 BURN-Proof: Enabled
[COLOR="Red"]I 19:13:34 Write Speed Successfully Set! - Effective: 17,982 KB/s (4x)[/COLOR]
I 19:13:45 Filling Buffer... (40 MB)
I 19:13:45 Writing LeadIn...
I 19:13:46 Writing Session 1 of 1... (1 Track, LBA: 0 - 12100735)
I 19:13:46 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 12100735)
[COLOR="Red"]W 19:17:48 Failed to Write Sectors 2100128 - 2100159 - Reason: Write Error[/COLOR]
W 19:17:48 Retrying (1 of 20)...
W 19:17:48 Retry Failed - Reason: Invalid Address For Write
W 19:17:48 Retrying (2 of 20)...
W 19:17:48 Retry Failed - Reason: Invalid Address For Write
W 19:17:49 Retrying (3 of 20)...
W 19:17:49 Retry Failed - Reason: Invalid Address For Write
W 19:17:49 Retrying (4 of 20)...
W 19:17:49 Retry Failed - Reason: Invalid Address For Write
W 19:17:49 Retrying (5 of 20)...
W 19:17:49 Retry Failed - Reason: Invalid Address For Write
W 19:17:49 Retrying (6 of 20)...
W 19:17:49 Retry Failed - Reason: Invalid Address For Write
W 19:17:49 Retrying (7 of 20)...
W 19:17:49 Retry Failed - Reason: Invalid Address For Write
W 19:17:49 Retrying (8 of 20)...
W 19:17:49 Retry Failed - Reason: Invalid Address For Write
W 19:17:49 Retrying (9 of 20)...
W 19:17:49 Retry Failed - Reason: Invalid Address For Write
W 19:17:49 Retrying (10 of 20)...
W 19:17:49 Retry Failed - Reason: Invalid Address For Write
W 19:17:49 Retrying (11 of 20)...
W 19:17:49 Retry Failed - Reason: Invalid Address For Write
W 19:17:49 Retrying (12 of 20)...
W 19:17:49 Retry Failed - Reason: Invalid Address For Write
W 19:17:49 Retrying (13 of 20)...
W 19:17:49 Retry Failed - Reason: Invalid Address For Write
W 19:17:49 Retrying (14 of 20)...
W 19:17:49 Retry Failed - Reason: Invalid Address For Write
W 19:17:49 Retrying (15 of 20)...
W 19:17:49 Retry Failed - Reason: Invalid Address For Write
W 19:17:49 Retrying (16 of 20)...
W 19:17:49 Retry Failed - Reason: Invalid Address For Write
W 19:17:49 Retrying (17 of 20)...
W 19:17:49 Retry Failed - Reason: Invalid Address For Write
W 19:17:49 Retrying (18 of 20)...
W 19:17:49 Retry Failed - Reason: Invalid Address For Write
W 19:17:49 Retrying (19 of 20)...
W 19:17:49 Retry Failed - Reason: Invalid Address For Write
W 19:17:49 Retrying (20 of 20)...
W 19:17:49 Retry Failed - Reason: Invalid Address For Write
W 19:43:38 Retrying (21)...
W 19:43:38 Retry Failed - Reason: Invalid Address For Write
W 19:43:44 Retrying (22)...
W 19:43:44 Retry Failed - Reason: Invalid Address For Write
W 19:43:46 Retrying (23)...
W 19:43:46 Retry Failed - Reason: Invalid Address For Write
W 19:43:48 Retrying (24)...
W 19:43:48 Retry Failed - Reason: Invalid Address For Write
W 19:43:50 Retrying (25)...
W 19:43:50 Retry Failed - Reason: Invalid Address For Write
W 19:43:52 Retrying (26)...
W 19:43:52 Retry Failed - Reason: Invalid Address For Write
E 19:43:55 Failed to Write Sectors 2100128 - 2100159 - Reason: Write Error
E 19:43:55 Next Writable Address: 0
I 19:43:55 Synchronising Cache...
W 19:43:59 User opted to skip the 'Close Track/Session/Disc' functions.
E 19:43:59 Failed to Write Image!
I 19:44:03 Exporting Graph Data...
I 19:44:03 Graph Data File: C:\Users\Mike\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.00_28-APRIL-2010_19-13_PHILIP-R04-00_4x.ibg
I 19:44:03 Export Successfully Completed!
E 19:44:03 Operation Failed! - Duration: 00:30:25
I 19:44:03 Average Write Rate: 2,321 KB/s (0.5x) - Maximum Write Rate: 18,082 KB/s (4.0x)
I 19:44:13 Close Request Acknowledged
I 19:44:13 Closing Down...
I 19:44:13 Shutting down SPTI...
I 19:44:13 ImgBurn closed!

 

[mike_r]

Zweite 'untertasse'

; //****************************************\\
;   ImgBurn Version 2.5.1.0 - Log
;   Wednesday, 28 April 2010, 19:51:59
; \\****************************************//
;
;
I 19:45:44 ImgBurn Version 2.5.1.0 started!
I 19:45:44 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)
I 19:45:44 Total Physical Memory: 12,573,816 KB  -  Available: 10,505,032 KB
W 19:45:44 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!
I 19:45:44 Initialising SPTI...
I 19:45:44 Searching for SCSI / ATAPI devices...
I 19:45:44 -> Drive 1 - Info: HL-DT-ST BD-RE  BH10LS30 1.00 (M:) (ATA)
I 19:45:44 -> Drive 2 - Info: HL-DT-ST DVDRAM GH22NS40 NL02 (L:) (ATA)
I 19:45:44 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (S:) (SCSI)
I 19:45:44 -> Drive 4 - Info: ELBY CLONEDRIVE 1.4 (T:) (SCSI)
I 19:45:44 -> Drive 5 - Info: ELBY CLONEDRIVE 1.4 (U:) (SCSI)
I 19:45:44 -> Drive 6 - Info: ELBY CLONEDRIVE 1.4 (V:) (SCSI)
I 19:45:44 -> Drive 7 - Info: ELBY CLONEDRIVE 1.4 (W:) (SCSI)
I 19:45:44 -> Drive 8 - Info: ELBY CLONEDRIVE 1.4 (X:) (SCSI)
I 19:45:44 -> Drive 9 - Info: ELBY CLONEDRIVE 1.4 (Z:) (SCSI)
I 19:45:44 -> Drive 10 - Info: ELBY CLONEDRIVE 1.4 (Y:) (SCSI)
I 19:45:44 Found 1 DVD±RW/RAM, 8 BD-ROM/HD DVD-ROMs and 1 BD-RE!
I 19:46:09 Operation Started!
I 19:46:09 Building Image Tree...
I 19:46:11 Calculating Totals...
I 19:46:11 Preparing Image...
I 19:46:11 Contents: 9 Files, 14 Folders
I 19:46:11 Content Type: BD Video
I 19:46:11 Data Type: MODE1/2048
I 19:46:11 File System(s): UDF (2.50)
I 19:46:11 Volume Label: MIKES_DISK_NEW
I 19:46:11 Size: 24,781,264,308 bytes
I 19:46:11 Sectors: 12,100,232
I 19:46:11 Image Size: 24,782,307,328 bytes
I 19:46:11 Image Sectors: 12,100,736
I 19:46:13 Operation Successfully Completed! - Duration: 00:00:03
I 19:46:13 Operation Started!
I 19:46:13 Source File: -==/\/[BUILD IMAGE]\/\==-
I 19:46:13 Source File Sectors: 12,100,736 (MODE1/2048)
I 19:46:13 Source File Size: 24,782,307,328 bytes
I 19:46:13 Source File Volume Identifier: MIKES_DISK_NEW
I 19:46:13 Source File Application Identifier: ImgBurn v2.5.1.0
I 19:46:13 Source File Implementation Identifier: ImgBurn
I 19:46:13 Source File File System(s): UDF (2.50)
I 19:46:13 Destination Device: [0:1:0] HL-DT-ST BD-RE  BH10LS30 1.00 (M:) (ATA)
[COLOR="Red"]I 19:46:13 Destination Media Type: BD-R (Disc ID: PHILIP-R04-00) (Speeds: 2x, 4x, 6x, 8x)[/COLOR]
I 19:46:13 Destination Media Sectors: 12,219,392
I 19:46:13 Write Mode: BD
I 19:46:13 Write Type: DAO
I 19:46:13 Write Speed: 4x
I 19:46:13 BD-R Verify Not Required: Yes
I 19:46:13 Link Size: Auto
I 19:46:13 Lock Volume: Yes
I 19:46:13 Test Mode: No
I 19:46:13 OPC: No
I 19:46:13 BURN-Proof: Enabled
[COLOR="Red"]I 19:46:13 Write Speed Successfully Set! - Effective: 17,982 KB/s (4x)[/COLOR]
I 19:46:25 Filling Buffer... (40 MB)
I 19:46:25 Writing LeadIn...
I 19:46:26 Writing Session 1 of 1... (1 Track, LBA: 0 - 12100735)
I 19:46:26 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 12100735)
[COLOR="Red"]W 19:50:32 Failed to Write Sectors 2100128 - 2100159 - Reason: Write Error[/COLOR]
W 19:50:32 Retrying (1 of 20)...
W 19:50:32 Retry Failed - Reason: Invalid Address For Write
W 19:50:32 Retrying (2 of 20)...
W 19:50:32 Retry Failed - Reason: Invalid Address For Write
W 19:50:32 Retrying (3 of 20)...
W 19:50:32 Retry Failed - Reason: Invalid Address For Write
W 19:50:32 Retrying (4 of 20)...
W 19:50:32 Retry Failed - Reason: Invalid Address For Write
W 19:50:32 Retrying (5 of 20)...
W 19:50:32 Retry Failed - Reason: Invalid Address For Write
W 19:50:32 Retrying (6 of 20)...
W 19:50:32 Retry Failed - Reason: Invalid Address For Write
W 19:50:32 Retrying (7 of 20)...
W 19:50:32 Retry Failed - Reason: Invalid Address For Write
W 19:50:32 Retrying (8 of 20)...
W 19:50:32 Retry Failed - Reason: Invalid Address For Write
W 19:50:32 Retrying (9 of 20)...
W 19:50:32 Retry Failed - Reason: Invalid Address For Write
W 19:50:32 Retrying (10 of 20)...
W 19:50:32 Retry Failed - Reason: Invalid Address For Write
W 19:50:32 Retrying (11 of 20)...
W 19:50:32 Retry Failed - Reason: Invalid Address For Write
W 19:50:32 Retrying (12 of 20)...
W 19:50:32 Retry Failed - Reason: Invalid Address For Write
W 19:50:32 Retrying (13 of 20)...
W 19:50:32 Retry Failed - Reason: Invalid Address For Write
W 19:50:32 Retrying (14 of 20)...
W 19:50:32 Retry Failed - Reason: Invalid Address For Write
W 19:50:32 Retrying (15 of 20)...
W 19:50:32 Retry Failed - Reason: Invalid Address For Write
W 19:50:32 Retrying (16 of 20)...
W 19:50:32 Retry Failed - Reason: Invalid Address For Write
W 19:50:32 Retrying (17 of 20)...
W 19:50:32 Retry Failed - Reason: Invalid Address For Write
W 19:50:32 Retrying (18 of 20)...
W 19:50:32 Retry Failed - Reason: Invalid Address For Write
W 19:50:32 Retrying (19 of 20)...
W 19:50:32 Retry Failed - Reason: Invalid Address For Write
W 19:50:32 Retrying (20 of 20)...
W 19:50:32 Retry Failed - Reason: Invalid Address For Write
W 19:50:54 Retrying (21)...
W 19:50:54 Retry Failed - Reason: Invalid Address For Write
W 19:50:55 Retrying (22)...
W 19:50:55 Retry Failed - Reason: Invalid Address For Write
W 19:50:55 Retrying (23)...
W 19:50:55 Retry Failed - Reason: Invalid Address For Write
W 19:50:56 Retrying (24)...
W 19:50:56 Retry Failed - Reason: Invalid Address For Write
W 19:50:56 Retrying (25)...
W 19:50:56 Retry Failed - Reason: Invalid Address For Write
W 19:50:57 Retrying (26)...
W 19:50:57 Retry Failed - Reason: Invalid Address For Write
W 19:50:57 Retrying (27)...
W 19:50:57 Retry Failed - Reason: Invalid Address For Write
W 19:50:58 Retrying (28)...
W 19:50:58 Retry Failed - Reason: Invalid Address For Write
W 19:50:58 Retrying (29)...
W 19:50:58 Retry Failed - Reason: Invalid Address For Write
W 19:50:58 Retrying (30)...
W 19:50:58 Retry Failed - Reason: Invalid Address For Write
W 19:50:59 Retrying (31)...
W 19:50:59 Retry Failed - Reason: Invalid Address For Write
W 19:50:59 Retrying (32)...
W 19:50:59 Retry Failed - Reason: Invalid Address For Write
W 19:51:00 Retrying (33)...
W 19:51:00 Retry Failed - Reason: Invalid Address For Write
W 19:51:00 Retrying (34)...
W 19:51:00 Retry Failed - Reason: Invalid Address For Write
W 19:51:01 Retrying (35)...
W 19:51:01 Retry Failed - Reason: Invalid Address For Write
E 19:51:02 Failed to Write Sectors 2100128 - 2100159 - Reason: Write Error
E 19:51:02 Next Writable Address: 0
I 19:51:02 Synchronising Cache...
I 19:51:04 Closing Track...
I 19:51:07 Finalising Disc...
E 19:51:18 Failed to Write Image!
I 19:51:24 Exporting Graph Data...
I 19:51:24 Graph Data File: C:\Users\Mike\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.00_28-APRIL-2010_19-46_PHILIP-R04-00_4x.ibg
I 19:51:24 Export Successfully Completed!
E 19:51:24 Operation Failed! - Duration: 00:05:05
I 19:51:24 Average Write Rate: 15,273 KB/s (3.4x) - Maximum Write Rate: 18,114 KB/s (4.0x)
I 19:51:59 Close Request Acknowledged
I 19:51:59 Closing Down...
I 19:51:59 Shutting down SPTI...
I 19:51:59 ImgBurn closed!

 

[mike_r]

Nummer 3

; //****************************************\\
;   ImgBurn Version 2.5.1.0 - Log
;   Saturday, 01 May 2010, 19:23:47
; \\****************************************//
;
;
I 17:15:35 ImgBurn Version 2.5.1.0 started!
I 17:15:35 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)
I 17:15:35 Total Physical Memory: 12,573,816 KB  -  Available: 10,453,620 KB
W 17:15:35 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!
I 17:15:35 Initialising SPTI...
I 17:15:35 Searching for SCSI / ATAPI devices...
I 17:15:35 -> Drive 1 - Info: HL-DT-ST BD-RE  BH10LS30 1.00 (M:) (ATA)
I 17:15:35 -> Drive 2 - Info: HL-DT-ST DVDRAM GH22NS40 NL02 (L:) (ATA)
I 17:15:35 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (S:) (SCSI)
I 17:15:35 -> Drive 4 - Info: ELBY CLONEDRIVE 1.4 (T:) (SCSI)
I 17:15:35 -> Drive 5 - Info: ELBY CLONEDRIVE 1.4 (U:) (SCSI)
I 17:15:35 -> Drive 6 - Info: ELBY CLONEDRIVE 1.4 (V:) (SCSI)
I 17:15:35 -> Drive 7 - Info: ELBY CLONEDRIVE 1.4 (W:) (SCSI)
I 17:15:35 -> Drive 8 - Info: ELBY CLONEDRIVE 1.4 (X:) (SCSI)
I 17:15:35 -> Drive 9 - Info: ELBY CLONEDRIVE 1.4 (Z:) (SCSI)
I 17:15:35 -> Drive 10 - Info: ELBY CLONEDRIVE 1.4 (Y:) (SCSI)
I 17:15:35 Found 1 DVD±RW/RAM, 8 BD-ROM/HD DVD-ROMs and 1 BD-RE!
I 17:16:25 Operation Started!
I 17:16:25 Building Image Tree...
I 17:16:25 Calculating Totals...
I 17:16:25 Preparing Image...
I 17:16:25 Contents: 9 Files, 14 Folders
I 17:16:25 Content Type: BD Video
I 17:16:25 Data Type: MODE1/2048
I 17:16:25 File System(s): UDF (2.50)
I 17:16:25 Volume Label: [Not Configured]
I 17:16:25 Size: 25,240,679,040 bytes
I 17:16:25 Sectors: 12,324,556
I 17:16:25 Image Size: 25,241,714,688 bytes
I 17:16:25 Image Sectors: 12,325,056
I 17:16:25 Operation Successfully Completed! - Duration: 00:00:00
I 17:16:34 Operation Started!
I 17:16:34 Building Image Tree...
I 17:16:34 Calculating Totals...
I 17:16:34 Preparing Image...
I 17:16:34 Contents: 9 Files, 14 Folders
I 17:16:34 Content Type: BD Video
I 17:16:34 Data Type: MODE1/2048
I 17:16:34 File System(s): UDF (2.50)
I 17:16:34 Volume Label: [Not Configured]
I 17:16:34 Size: 25,240,679,040 bytes
I 17:16:34 Sectors: 12,324,556
I 17:16:34 Image Size: 25,241,714,688 bytes
I 17:16:34 Image Sectors: 12,325,056
I 17:16:34 Operation Successfully Completed! - Duration: 00:00:00
I 17:21:25 Operation Started!
I 17:21:25 Building Image Tree...
I 17:21:25 Calculating Totals...
I 17:21:25 Preparing Image...
I 17:21:25 Contents: 9 Files, 14 Folders
I 17:21:25 Content Type: BD Video
I 17:21:25 Data Type: MODE1/2048
I 17:21:25 File System(s): UDF (2.50)
I 17:21:25 Volume Label: [Not Configured]
I 17:21:25 Size: 24,458,473,968 bytes
I 17:21:25 Sectors: 11,942,620
I 17:21:25 Image Size: 24,459,476,992 bytes
I 17:21:25 Image Sectors: 11,943,104
I 17:21:25 Operation Successfully Completed! - Duration: 00:00:00
I 17:21:35 Operation Started!
I 17:21:35 Building Image Tree...
I 17:21:37 Calculating Totals...
I 17:21:37 Preparing Image...
I 17:21:37 Contents: 9 Files, 14 Folders
I 17:21:37 Content Type: BD Video
I 17:21:37 Data Type: MODE1/2048
I 17:21:37 File System(s): UDF (2.50)
I 17:21:37 Volume Label: MIKES_DISK_3
I 17:21:37 Size: 24,458,473,968 bytes
I 17:21:37 Sectors: 11,942,620
I 17:21:37 Image Size: 24,459,476,992 bytes
I 17:21:37 Image Sectors: 11,943,104
I 17:21:39 Operation Successfully Completed! - Duration: 00:00:04
I 17:21:39 Operation Started!
I 17:21:39 Source File: -==/\/[BUILD IMAGE]\/\==-
I 17:21:39 Source File Sectors: 11,943,104 (MODE1/2048)
I 17:21:39 Source File Size: 24,459,476,992 bytes
I 17:21:39 Source File Volume Identifier: MIKES_DISK_3
I 17:21:39 Source File Application Identifier: ImgBurn v2.5.1.0
I 17:21:39 Source File Implementation Identifier: ImgBurn
I 17:21:39 Source File File System(s): UDF (2.50)
[COLOR="Red"]I 17:21:39 Destination Device: [0:1:0] HL-DT-ST BD-RE  BH10LS30 1.00 (M:) (ATA)[/COLOR]
I 17:21:39 Destination Media Type: BD-R (Disc ID: PHILIP-R04-00) (Speeds: 2x, 4x, 6x, 8x)
I 17:21:39 Destination Media Sectors: 12,219,392
I 17:21:39 Write Mode: BD
I 17:21:39 Write Type: DAO
I 17:21:39 Write Speed: 4x
I 17:21:39 BD-R Verify Not Required: Yes
I 17:21:39 Link Size: Auto
I 17:21:39 Lock Volume: Yes
I 17:21:39 Test Mode: No
I 17:21:39 OPC: No
I 17:21:39 BURN-Proof: Enabled
[COLOR="Red"]I 17:21:39 Write Speed Successfully Set! - Effective: 17,982 KB/s (4x)[/COLOR]
I 17:21:52 Filling Buffer... (40 MB)
I 17:21:53 Writing LeadIn...
I 17:21:54 Writing Session 1 of 1... (1 Track, LBA: 0 - 11943103)
I 17:21:54 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 11943103)
[COLOR="Red"]W 17:33:01 Failed to Write Sectors 5770144 - 5770175 - Reason: Write Error[/COLOR]
W 17:33:01 Retrying (1 of 20)...
W 17:33:01 Retry Failed - Reason: Invalid Address For Write
W 17:33:01 Retrying (2 of 20)...
W 17:33:01 Retry Failed - Reason: Invalid Address For Write
W 17:33:01 Retrying (3 of 20)...
W 17:33:01 Retry Failed - Reason: Invalid Address For Write
W 17:33:01 Retrying (4 of 20)...
W 17:33:01 Retry Failed - Reason: Invalid Address For Write
W 17:33:01 Retrying (5 of 20)...
W 17:33:01 Retry Failed - Reason: Invalid Address For Write
W 17:33:01 Retrying (6 of 20)...
W 17:33:01 Retry Failed - Reason: Invalid Address For Write
W 17:33:01 Retrying (7 of 20)...
W 17:33:01 Retry Failed - Reason: Invalid Address For Write
W 17:33:01 Retrying (8 of 20)...
W 17:33:01 Retry Failed - Reason: Invalid Address For Write
W 17:33:01 Retrying (9 of 20)...
W 17:33:01 Retry Failed - Reason: Invalid Address For Write
W 17:33:01 Retrying (10 of 20)...
W 17:33:01 Retry Failed - Reason: Invalid Address For Write
W 17:33:01 Retrying (11 of 20)...
W 17:33:01 Retry Failed - Reason: Invalid Address For Write
W 17:33:01 Retrying (12 of 20)...
W 17:33:01 Retry Failed - Reason: Invalid Address For Write
W 17:33:01 Retrying (13 of 20)...
W 17:33:01 Retry Failed - Reason: Invalid Address For Write
W 17:33:01 Retrying (14 of 20)...
W 17:33:01 Retry Failed - Reason: Invalid Address For Write
W 17:33:01 Retrying (15 of 20)...
W 17:33:01 Retry Failed - Reason: Invalid Address For Write
W 17:33:01 Retrying (16 of 20)...
W 17:33:01 Retry Failed - Reason: Invalid Address For Write
W 17:33:01 Retrying (17 of 20)...
W 17:33:01 Retry Failed - Reason: Invalid Address For Write
W 17:33:01 Retrying (18 of 20)...
W 17:33:01 Retry Failed - Reason: Invalid Address For Write
W 17:33:01 Retrying (19 of 20)...
W 17:33:01 Retry Failed - Reason: Invalid Address For Write
W 17:33:01 Retrying (20 of 20)...
W 17:33:02 Retry Failed - Reason: Invalid Address For Write
W 17:33:11 Retrying (21)...
W 17:33:11 Retry Failed - Reason: Invalid Address For Write
W 17:33:12 Retrying (22)...
W 17:33:12 Retry Failed - Reason: Invalid Address For Write
W 17:33:12 Retrying (23)...
W 17:33:12 Retry Failed - Reason: Invalid Address For Write
E 17:33:14 Failed to Write Sectors 5770144 - 5770175 - Reason: Write Error
E 17:33:14 Next Writable Address: 0
I 17:33:14 Synchronising Cache...
W 17:33:26 User opted to skip the 'Close Track/Session/Disc' functions.
E 17:33:26 Failed to Write Image!
I 17:33:26 Exporting Graph Data...
I 17:33:26 Graph Data File: C:\Users\Mike\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.00_01-MAY-2010_17-21_PHILIP-R04-00_4x.ibg
I 17:33:26 Export Successfully Completed!
E 17:33:26 Operation Failed! - Duration: 00:11:46
I 17:33:26 Average Write Rate: 16,996 KB/s (3.8x) - Maximum Write Rate: 18,084 KB/s (4.0x)

;

 

[GorillaBD]

Hallo Mike,

seltsam.

Sind die Untertassen alle aus der gleichen Spindel ?

Wie hoch ist denn dann jetzt Deine Gesamtausfallrate ?


Greets
GorillaBD

 

[mike_r]

Ja, alle von der selbe spindel. Soweit habe ich 4 von 24 ausfaelle gehabt. Wenn der letzte verwendet ist schicke ich die defekten an AS-Burn zurueck mit der bitte fuer ein ersatztz.

 

[GorillaBD]

Hm.

Vielleicht probierst Du beim nächsten Lot mal die Mediarange 4x. Ist der gleiche Mediacode, aber ich hatte mit denen weder auf meinem GGW-H20L noch Plex 940 irgendwelche Probleme. Und verstaubte Spindeln bekam ich von denen auch noch nie.

Ob der BH10LS30 die nicht so gerne mag ? Schwer vorstellbar.


Greets
GBD

 

[mike_r]

Nummer 6 von 25. So >20% ausfall rate. Sehr schlecht

; //****************************************\\
;   ImgBurn Version 2.5.1.0 - Log
;   Thursday, 13 May 2010, 19:09:02
; \\****************************************//
;
;
I 19:03:24 ImgBurn Version 2.5.1.0 started!
I 19:03:24 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)
I 19:03:24 Total Physical Memory: 12,573,816 KB  -  Available: 10,237,060 KB
W 19:03:24 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!
I 19:03:24 Initialising SPTI...
I 19:03:24 Searching for SCSI / ATAPI devices...
I 19:03:25 -> Drive 1 - Info: HL-DT-ST BD-RE  BH10LS30 1.00 (M:) (ATA)
I 19:03:25 -> Drive 2 - Info: HL-DT-ST DVDRAM GH22NS40 NL02 (L:) (ATA)
I 19:03:25 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (S:) (SCSI)
I 19:03:25 -> Drive 4 - Info: ELBY CLONEDRIVE 1.4 (T:) (SCSI)
I 19:03:25 -> Drive 5 - Info: ELBY CLONEDRIVE 1.4 (U:) (SCSI)
I 19:03:25 -> Drive 6 - Info: ELBY CLONEDRIVE 1.4 (V:) (SCSI)
I 19:03:25 -> Drive 7 - Info: ELBY CLONEDRIVE 1.4 (W:) (SCSI)
I 19:03:25 -> Drive 8 - Info: ELBY CLONEDRIVE 1.4 (X:) (SCSI)
I 19:03:25 -> Drive 9 - Info: ELBY CLONEDRIVE 1.4 (Z:) (SCSI)
I 19:03:25 -> Drive 10 - Info: ELBY CLONEDRIVE 1.4 (Y:) (SCSI)
I 19:03:25 Found 1 DVD±RW/RAM, 8 BD-ROM/HD DVD-ROMs and 1 BD-RE!
I 19:04:43 Operation Started!
I 19:04:43 Source File: E:\MIKES_DISK_5.iso
I 19:04:43 Source File Sectors: 11,813,440 (MODE1/2048)
I 19:04:43 Source File Size: 24,193,925,120 bytes
I 19:04:43 Source File Volume Identifier: MIKES_DISK_5
I 19:04:43 Source File Volume Set Identifier: 3CAD93C100B4415D
I 19:04:43 Source File Application Identifier: ImgBurn v2.5.1.0
I 19:04:43 Source File Implementation Identifier: ImgBurn
I 19:04:43 Source File File System(s): UDF (2.50)
I 19:04:43 Destination Device: [0:1:0] HL-DT-ST BD-RE  BH10LS30 1.00 (M:) (ATA)
I 19:04:43 Destination Media Type: BD-R (Disc ID: PHILIP-R04-00) (Speeds: 2x, 4x, 6x, 8x)
I 19:04:43 Destination Media Sectors: 12,219,392
I 19:04:43 Write Mode: BD
I 19:04:43 Write Type: DAO
I 19:04:43 Write Speed: 4x
I 19:04:43 BD-R Verify Not Required: Yes
I 19:04:43 Link Size: Auto
I 19:04:43 Lock Volume: Yes
I 19:04:43 Test Mode: No
I 19:04:43 OPC: No
I 19:04:43 BURN-Proof: Enabled
I 19:04:43 Write Speed Successfully Set! - Effective: 17,982 KB/s (4x)
I 19:04:53 Filling Buffer... (40 MB)
I 19:04:54 Writing LeadIn...
I 19:04:55 Writing Session 1 of 1... (1 Track, LBA: 0 - 11813439)
I 19:04:55 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 11813439)
W 19:08:02 Failed to Write Sectors 1575840 - 1575871 - Reason: Write Error
W 19:08:02 Retrying (1 of 20)...
W 19:08:02 Retry Failed - Reason: Invalid Address For Write
W 19:08:02 Retrying (2 of 20)...
W 19:08:02 Retry Failed - Reason: Invalid Address For Write
W 19:08:02 Retrying (3 of 20)...
W 19:08:02 Retry Failed - Reason: Invalid Address For Write
W 19:08:02 Retrying (4 of 20)...
W 19:08:02 Retry Failed - Reason: Invalid Address For Write
W 19:08:02 Retrying (5 of 20)...
W 19:08:02 Retry Failed - Reason: Invalid Address For Write
W 19:08:02 Retrying (6 of 20)...
W 19:08:02 Retry Failed - Reason: Invalid Address For Write
W 19:08:02 Retrying (7 of 20)...
W 19:08:03 Retry Failed - Reason: Invalid Address For Write
W 19:08:03 Retrying (8 of 20)...
W 19:08:03 Retry Failed - Reason: Invalid Address For Write
W 19:08:03 Retrying (9 of 20)...
W 19:08:03 Retry Failed - Reason: Invalid Address For Write
W 19:08:03 Retrying (10 of 20)...
W 19:08:03 Retry Failed - Reason: Invalid Address For Write
W 19:08:03 Retrying (11 of 20)...
W 19:08:03 Retry Failed - Reason: Invalid Address For Write
W 19:08:03 Retrying (12 of 20)...
W 19:08:03 Retry Failed - Reason: Invalid Address For Write
W 19:08:03 Retrying (13 of 20)...
W 19:08:03 Retry Failed - Reason: Invalid Address For Write
W 19:08:03 Retrying (14 of 20)...
W 19:08:03 Retry Failed - Reason: Invalid Address For Write
W 19:08:03 Retrying (15 of 20)...
W 19:08:03 Retry Failed - Reason: Invalid Address For Write
W 19:08:03 Retrying (16 of 20)...
W 19:08:03 Retry Failed - Reason: Invalid Address For Write
W 19:08:03 Retrying (17 of 20)...
W 19:08:03 Retry Failed - Reason: Invalid Address For Write
W 19:08:03 Retrying (18 of 20)...
W 19:08:03 Retry Failed - Reason: Invalid Address For Write
W 19:08:03 Retrying (19 of 20)...
W 19:08:03 Retry Failed - Reason: Invalid Address For Write
W 19:08:03 Retrying (20 of 20)...
W 19:08:03 Retry Failed - Reason: Invalid Address For Write
W 19:08:08 Retrying (21)...
W 19:08:08 Retry Failed - Reason: Invalid Address For Write
W 19:08:09 Retrying (22)...
W 19:08:09 Retry Failed - Reason: Invalid Address For Write
E 19:08:10 Failed to Write Sectors 1575840 - 1575871 - Reason: Write Error
E 19:08:10 Next Writable Address: 0
I 19:08:10 Synchronising Cache...
W 19:08:14 User opted to skip the 'Close Track/Session/Disc' functions.
E 19:08:14 Failed to Write Image!
I 19:08:19 Exporting Graph Data...
I 19:08:19 Graph Data File: C:\Users\Mike\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.00_13-MAY-2010_19-04_PHILIP-R04-00_4x.ibg
I 19:08:19 Export Successfully Completed!
E 19:08:19 Operation Failed! - Duration: 00:03:31
I 19:08:19 Average Write Rate: 16,245 KB/s (3.6x) - Maximum Write Rate: 18,078 KB/s (4.0x)
I 19:09:02 Close Request Acknowledged
I 19:09:02 Closing Down...
I 19:09:02 Shutting down SPTI...
I 19:09:02 ImgBurn closed!

 

[GorillaBD]

Hast Du mal versucht, mit eingeschalteter Störverwaltung zu brennen ?


Greets
GBD

 

[mike_r]

Ich habe keine ähnung was das ist. Ich könnte keine option mit diese begriff finden.

Auf der ImgBurn forum meinen sie das LG mussen ein neue firmware machen und ein andere typ meinte das ich muss ein chipsatz update machen.

 

[GorillaBD]

"Störverwaltung" findest Du im Englischen als "BD Defect Management"

z.B. Nero:

Damit verifizieren Blu-ray-Brenner die Daten bereits während des Brennvorgangs. Die Überprüfung geht allerdings zu Lasten der Brenngeschwindigkeit. Wer auf den Prüfvorgang verzichten und dafür schneller brennen möchte, schaltet die “BD Defect Management”-Funktion einfach aus. Im Brennprogramm Nero muss hierzu die Tastenkombination [Strg]+[R] gedrückt, der Blu-ray-Brenner ausgewählt und unter “Optionen” das Kontrollkästchen “Störverwaltung” deaktiviert werden.

z.B. IMGBURN:

Zum Setzen in den BD Defect Management - Modus bei ImgBurn in die Settings gehen, dann auf den Reiter "Write/Schreiben" und dort dann "Page1/Seite1".

Dort dann sicher gehen, dass die Haken ENTFERNT sind bei
DVD-RAM/BD-RE Fastwrite
und
BD-R Verify not required

Das BD Defect Management belegt ca. 256 MB eigenen Speicher auf der BD. Es wird während des Schreibens sofort ein Verify (ohne Fehlerkorrektur) durchgeführt, im Schadensfall auf einen anderen Sektor geschrieben und der defekte Sektor in der Rooting-Datei vermerkt.

Die Schreibgeschwindigkeit fällt um 50-70% ab. 2x -> 1x, 4x -> 1,5x, 6x -> 2,3x, 8x -> 2,9x


Bei kleineren Störungen (nur wenige Sektoren) funktioniert die BD hinterher auch im Standalone-Player. Bei massiveren Störungen, wenn viele Sektoren woandershin verlagert werden mussten, bekommen Standalones Schwierigkeiten. Das Hin- und Herspringen des Lasers dauert dann länger, als der Pufferspeicher Daten im Vorrat hat. Die Wiedergabe kann so kurzzeitig unterbrechen oder der Player steigt sogar ganz aus (Film bleibt dauerhaft stehen).

Einen Versuch ist es aber wert.


Greets
GBD

 

[GorillaBD]

Auf der ImgBurn forum meinen sie das LG mussen ein neue firmware machen und ein andere typ meinte das ich muss ein chipsatz update machen.

Ich halte Beides für unwahrscheinlich. Diese BD gab es schon, bevor Dein Brenner auf dem Markt erschienen ist, der Mediacode ist also bereits bekannt gewesen. Möglicherweise kann LG aber "nachbessern" und etwas andere Brennparameter würden für diese Disksorte helfen.

Chipsatz-Update (vermute, der meinte den SATA-Chipsatz auf dem PC-Mainboard) ist immer eine gute Option, weil sonst Disklaufwerke oft nicht richtig arbeiten. Dies solltest Du tun, wenn Du mit allen Rohlingssorten Ärger beim Beschreiben hast.

Wenn Du aber einige Rohlingssorten einwandfrei beschreiben kannst, andere aber nicht, kann es nicht am Chipsatz liegen. Dann schon eher Firmware oder Rohlingsqualität.


Greets
GBD

 

[GorillaBD]

Kurze Rückinfo:

Wieder weitere 20 Stk. Mediarange 4x (also diese Philips hier) mit 6x-Speed auf dem Plextor 940 gebrannt (normal, also ohne BD Defect Management), alle ohne Fehlermeldung (IMGBURN) und einwandfreie Wiedergabe im Standalone-Player.

Greets
GBD